Assessment of satellite ocean color products of MERIS,MODIS and SeaWiFS along the East China Coast (in the Yellow Sea and East China Sea)

The validation of satellite ocean-color products is an important task of ocean-color missions. The uncertainties of these products are poorly quantified in the Yellow Sea (YS) and East China Sea (ECS), which are well known for their optical complexity and turbidity in terms of both oceanic and atmospheric optical properties. The objective of this paper is to evaluate the primary ocean-color products from three major ocean-color satellites, namely the Moderate Resolution Imaging Spectroradiometer (MODIS), Medium Resolution Imaging Spectrometer (MERIS), and Sea-viewing Wide Field-of-view Sensor (SeaWiFS). Through match-up analysis with in situ data, it is found that satellite retrievals of the spectral remote sensing reflectance R_rs(λ) at the blue-green and green bands from MERIS, MODIS and SeaWiFS have the lowest uncertainties with a median of the absolute percentage of difference (APD_m) of 15–27% and root-mean-square-error (RMS) of 0.0021–0.0039 sr⁻¹, whereas the R_rs(λ) uncertainty at 412 nm is the highest (APD_m 47–62%, RMS 0.0027–0.0041 sr⁻¹). The uncertainties of the aerosol optical thickness (AOT) τ_a, diffuse attenuation coefficient for downward irradiance at 490 nm K_d(490), concentrations of suspended particulate sediment concentration (SPM) and Chlorophyll a (Chl-a) were also quantified. It is demonstrated that with appropriate in-water algorithms specifically developed for turbid waters rather than the standard ones adopted in the operational satellite data processing chain, the uncertainties of satellite-derived properties of K_d(490), SPM, and Chl-a may decrease significantly to the level of 20–30%, which is true for the majority of the study area. This validation activity advocates for (1) the improvement of the atmosphere correction algorithms with the regional aerosol optical model, (2) switching to regional in-water algorithms over turbid coastal waters, and (3) continuous support of the dedicated in situ data collection effort for the validation task.     

A global satellite view of the seasonal distribution of mineral dust and its correlation with atmospheric circulation

Aerosols make a considerable contribution to the climate system through their radiative and cloud condensation nuclei effects, which underlines the need for understanding the origin of aerosols and their transport pathways. Seasonal distribution of mineral dust around the globe and its correlation with atmospheric circulation is investigated using satellite data, and meteorological data from ECMWF. The most important sources of dust are located in North Africa, the Middle East and Southwest Asia with an observed summer maximum, and East Asia with a spring peak. Maximum dust activity over North Africa and the Middle East in summer is attributed to dry convection associated with the summertime low-pressure system, while unstable weather and dry conditions are responsible for the spring peak in dust emission in East Asia. Intercontinental transport of mineral dust by atmospheric circulation has been observed, including trans-Atlantic transport of North African dust, trans-Pacific transport of Asian dust, and transport of dust from the Middle East across the Indian Ocean. The extent of African dust over the Atlantic Ocean and its latitudinal variation with season is related to the large-scale atmospheric circulation, including seasonal changes in the position of the intertropical convergence zone (ITCZ) and variation of wind patterns. North African aerosols extend over longer distances across the North Atlantic in summer because of greater dust emission, an intensified easterly low level jet (LLJ) and strengthening of the Azores-Bermuda anticyclonic circulation. Transport of East Asian aerosol is facilitated by the existence of a LLJ that extends from East Asia to the west coast of North America.     

Andean earthquakes triggered by the 2010 Maule,Chile (Mw 8.8) earthquake: Comparisons of geodetic,seismic and geologic constraints

The Maule, Chile, (M_w 8.8) earthquake on 27 February 2010 triggered deformation events over a broad area, allowing investigation of stress redistribution within the upper crust following a mega-thrust subduction event. We explore the role that the Maule earthquake may have played in triggering shallow earthquakes in northwestern Argentina and Chile. We investigate observed ground deformation associated with the M_w 6.2 (GCMT) Salta (1450 km from the Maule hypocenter, 9 h after the Maule earthquake), M_w 5.8 Catamarca (1400 km; nine days), M_w 5.1 Mendoza (350 km; between one to five days) earthquakes, as well as eight additional earthquakes without an observed geodetic signal. We use seismic and Interferometric Synthetic Aperture Radar (InSAR) observations to characterize earthquake location, magnitude and focal mechanism, and characterize how the non-stationary, spatially correlated noise present in the geodetic imagery affects the accuracy of our parameter estimates. The focal mechanisms for the far-field Salta and Catamarca earthquakes are broadly consistent with regional late Cenozoic fault kinematics. We infer that dynamic stresses due to the passage of seismic waves associated with the Maule earthquake likely brought the Salta and Catamarca regions closer to failure but that the involved faults may have already been at a relatively advanced stage of their seismic cycle. The near-field Mendoza earthquake geometry is consistent with triggering related to positive static Coulomb stress changes due to the Maule earthquake but is also aligned with the South America-Nazca shortening direction. None of the earthquakes considered in this study require that the Maule earthquake reactivated faults in a sense that is inconsistent with their long-term behavior.     

Effects of Crustal Structure for Estimation of Vertical Load Deformation on the Solid Earth Using GRACE in China Mainland

When the inversion of vertical load deformation on Earth’s surface using GRACE (Gravity Recovery and Climate Experiment) data, the load Love numbers based on PREM (Preliminary Reference Earth Model) are commonly used. But the crustal structure under China mainland especially under Tibet Plateau is quite different from that given by PREM Earth model. New load Love numbers were calculated based on a modified Earth model which accounted for regional crustal structure in China mainland. And the effect of regional crustal structure in China mainland for estimation of vertical load deformation on Earth’s surface using GRACE RL05 data was investigated in this paper. It is found that the effect of crustal difference is very prominent. The relative difference of load Love numbers for vertical deformation can reach about 11% at degree 90. The extreme value of difference in vertical load deformation below 90 degree of spherical harmonic coefficients located at the southeastern Tibet Plateau and the maximum relative difference reaches 10%. The relative difference of the root mean square is about 4%. It is suggesting that an Earth model with a more realistic crustal structue instead of PREM should be used for the estimation of vertical load deformation in China mainland espacially in Tibet Plateau.     

Retrieval of wheat leaf area index from AWiFS multispectral data using canopy radiative transfer simulation

Accurate representation of leaf area index (LAI) from high resolution satellite observations is obligatory for various modelling exercises and predicting the precise farm productivity. Present study compared the two retrieval approach based on canopy radiative transfer (CRT) method and empirical method using four vegetation indices (VI) (e.g. NDVI, NDWI, RVI and GNDVI) to estimate the wheat LAI. Reflectance observations available at very high (56 m) spatial resolution from Advanced Wide-Field Sensor (AWiFS) sensor onboard Indian Remote Sensing (IRS) P6, Resourcesat-1 satellite was used in this study. This study was performed over two different wheat growing regions, situated in different agro-climatic settings/environments: Trans-Gangetic Plain Region (TGPR) and Central Plateau and Hill Region (CPHR). Forward simulation of canopy reflectances in four AWiFS bands viz. green (0.52–0.59 μm), red (0.62–0.68 μm), NIR (0.77–0.86 μm) and SWIR (1.55–1.70 μm) were carried out to generate the look up table (LUT) using CRT model PROSAIL from all combinations of canopy intrinsic variables. An inversion technique based on minimization of cost function was used to retrieve LAI from LUT and observed AWiFS surface reflectances. Two consecutive wheat growing seasons (November 2005–March 2006 and November 2006–March 2007) datasets were used in this study. The empirical models were developed from first season data and second growing season data used for validation. Among all the models, LAI-NDVI empirical model showed the least RMSE (root mean square error) of 0.54 and 0.51 in both agro-climatic regions respectively. The comparison of PROSAIL retrieved LAI with in situ measurements of 2006–2007 over the two agro-climatic regions produced substantially less RMSE of 0.34 and 0.41 having more R² of 0.91 and 0.95 for TGPR and CPHR respectively in comparison to empirical models. Moreover, CRT retrieved LAI had less value of errors in all the LAI classes contrary to empirical estimates. The PROSAIL based retrieval has potential for operational implementation to determine the regional crop LAI and can be extendible to other regions after rigorous validation exercise.     

���ҹ��������ǵ���ϵͳ���Ƿ�Χ����չ����������̽��

????????????????????????????????Χ????????????????????????????????????????????????????????????4??IGSO????????????????????????Χ???γ55??????????γ75??     

A mass‐balance approach to estimate in‐stream processes in a large river

A mass‐balance approach was used to estimate in‐stream processes related to inorganic nitrogen species (NH₄⁺, NO₂^? and NO₃^?) in a large river characterized by highly variable hydrological conditions, the Garonne River (south‐west France). Studies were conducted in two consecutive reaches of 30 km located downstream of the Toulouse agglomeration (population 760 000, seventh order), impacted by modification of discharge regime and high nitrogen concentrations. The mass‐balance was calculated by two methods: the first is based on a variable residence time (VRT) simulated by a one‐dimensional (1‐D) hydraulic model; the second is a based on a calculation using constant residence time (CRT) evaluated according to hydrographic peaks. In the context of the study, removal of dissolved inorganic nitrogen (DIN) for a reach of 30 km is underestimated by 11% with the CRT method. In sub‐reaches, the discrepancy between the two methods led to a 50% overestimation of DIN removal in the upper reach (13 km) and a 43% underestimation in the lower reach (17 km) using the CRT method. The study highlights the importance of residence time determination when using modelling approaches in the assessment of whole stream processes in short‐duration mass‐balance for a large river under variable hydrological conditions. Copyright © 2007 John Wiley & Sons, Ltd.     

A revised model for cycloid growth mechanics on Europa: Evidence from surface morphologies and geometries

Although a single model currently exists to explain the development of curved Europan cycloids, there have been no systematic studies of the range of morphologies and quantifiable geometric parameters of cycloidal features. We address variations in geometry along individual cycloid segments, characterizing differences in cusp styles and angles, and addressing the morphologic aspects of cycloid segments and cusps. In so doing, we illustrate how geometric and morphologic evidence imply a formation mechanism that differs from the existing model in several aspects. The current model states that cycloids are initiated as tensile fractures that grow in a curved path in response to rotating diurnal tidal stresses on Europa. However, the geometry of a cycloid cusp necessitates that shear stress was resolved onto the existing cycloid segment by the rotating diurnal stresses at the instant of cusp formation. Furthermore, we observe that cycloid cusps have a strikingly similar geometry to tailcracks that developed at the tips of many ridge-like strike-slip faults on Europa in response to shearing at the fault tip. We suggest that this similarity in geometries can be attributed to an identical formation mechanism whereby cycloid cusps form by a tailcracking process. We therefore present a revised, mechanically-based model for cycloid formation that retains the basic premise that crack growth is governed by diurnal stresses, but describes the development of cycloid cusps in response to resolved shear stresses at the tips of existing cycloid segments. The ratio of normal to shear stress at the time of tailcrack formation dictates the cusp angle and, over longer time periods, influences the morphologic evolution of the cycloid segment as it is repeatedly reworked by tidal stresses.     

香港揽胜太空影像地图集的设计与计算机制图

香港揽胜太空影像地图集是一本区域性综合地图集。作为信息时代的区域综合地图集的设计和编制,我们认为应该把重点放在对资源信息的深加工上,应用遥感技术、地理信息系统、计算机制图、电子制版与四色印刷技术,才能为政府决策部门提供区域可持续发展更加实用的信息产品。     

新经济时代的西部开发

 我国西部开发将要在网络经济、知识经济与全球化经济的新时代下进行。其国家战略目标是逐步缩小地区差异、加快经济结构性调整,增进民族团结。经过近50年来的努力,西部的地球科学信息资源是相当丰富的,利用卫星遥感数据更新也是切实可行的。应该充分加以利用,作为区域规划和工程设计的依据,并建议以信息化带动现代化,实现跨越式发展