Modeling the 2D behavior of dry‐stone retaining walls by a fully discrete element method

The dry‐stone retaining walls (DSRW) have been tipped as a promising solution for sustainable development. However, before recently, their behavior is relatively obscure. In this study, discrete element method (DEM) approach was applied to simulate the plane strain failure of these walls. A commercial DEM package (PFC2D™) was used throughout this study. The authors used a fully discrete approach; thus, both the wall and the backfill were modeled as discrete elements. The methodology for obtaining the micromechanical parameters was discussed in detail; this includes the three mechanical sub‐systems of DSRWs: wall, backfill and interface. The models were loaded progressively until failure, and then the results were compared with the full‐scale experimental results where the walls were loaded, respectively, with hydrostatic load and backfill. Despite its complexity and its intensive calculation time, DEM model can then be used to validate a more simplified approach. Copyright © 2015 John Wiley & Sons, Ltd.     

面向WebGL的矢量数据三维绘制技术

矢量数据的叠加显示能够提高三维虚拟地球的表达效果与分析能力。受限于GPU的计算精度,在三维虚拟地球中矢量数据绘制普遍存在抖动现象和深度冲突现象。对基于WebGL的矢量数据三维绘制中计算精度问题进行了分析,提出了使用CPU RTC技术和GPU RTE技术提高顶点变换的精度,使用多视锥渲染算法和深度平面技术解决深度缓存精度问题。实验证明,这几种技术和算法可以有效缓解抖动现象和深度冲突现象导致的视觉干扰,改善了各种尺度和范围的矢量数据在三维地形上的叠加显示效果。     

受控定向钻进技术在福建马坑矿区的应用

重点介绍了福建马坑矿区ZK8321分支孔受控定向钻进技术。施工中运用了国内先进的螺杆钻造斜技术及光纤陀螺测量定向技术,避开上部复杂孔段（松散破碎层、溶洞地层、采空区等）及对勘探工作的影响,达到了施工目的;总结了施工技术难点与措施,分析了施工技术效果,积累了宝贵的施工经验。     

Is Ziarat a Potential Site for Conventional or Unconventional Energy Resources?

A structural interpretation of the Ziarat block in the Balochistan region (a part of the Suleiman Fold and Thrust Belt) has been carried out using seismic and seismological data. Seismic data consists of nine 2.5D pre‐stack migrated seismic lines, whereas the seismological data covers the Fault Plane Solution and source parameters. Structural interpretation describes two broad fault sets of fore and back thrusts in the study area that have resulted in the development of pop‐up structures, accountable for the structural traps and seismicity pattern in terms of seismic hazard. Seismic interpretation includes time and depth contour maps of the Dungan Formation and Ranikot group, while seismological interpretation includes Fault Plane Solution, that is correlated with a geological and structural map of the area for the interpretation of the nature of the subsurface faults. Principal stresses are also estimated for the Ranikot group and Dungan Formation. In order to calculate anisotropic elastic properties, the parameters of the rock strength of the formations are first determined from seismic data, along with the dominant stresses (vertical, minimum horizontal, and maximum horizontal). The differential ratio of the maximum and minimum horizontal stresses is obtained to indicate optimal zones for hydraulic fracturing, and to assess the potential for geothermal energy reservoir prospect generation. The stress maps indicate high values towards the deeper part of the horizon, and low towards the shallower part, attributed to the lithological and structural variation in the area. Outcomes of structural interpretation indicate a good correlation of structure and tectonics from both seismological and seismic methods.     

金沙江下虎跳滑石板滑坡破坏机理及稳定性分析

1996年10月28日发生在金沙江下虎跳峡口的滑石板滑坡,因堵塞金沙江、摧毁公路而引起高度重视。野外调查发现,滑石板滑坡是典型结构面控制的顺层基岩滑坡,层面和两组近于垂直层面的节理将边坡厚层灰岩切割成不同规模的菱形块体,长期的风化作用、重力、降雨、人工开挖公路等因素作用下,这些菱形块体从顺层稳定状态演化为稳定性较差的悬挂体,受河谷边坡斜向割切影响,表现为梯级叠次悬挂,最外边的悬挂体稳定性最差,最容易发生快速滑动。因此,该滑坡每次发生破坏滑动的体积不会很大,但是具有多次重复发生的特点,值得高度注意。     

用于太阳紫外辐射测量传感器的设计

介绍了太阳紫外辐射的测量原理,为了提高入射光学系统的余弦响应特性而设计的余弦漫射器,以及等效辐射平面位置的计算方法。设计了适用于海滨浴场等场所的太阳紫外线辐射传感器的光学系统结构,研制了试验样机,开展了相应的试验,并对试验结果进行了分析。     

基于组件技术的地质剖面图自动绘制

绘制地质剖面图是地质工作中的一项重要内容,研究了钻孔属性数据库的特点,利用Surfer绘制钻孔每一层等值线的基础上并在VisualBasic环境下,通过对GeoMap控件的二次开发,而在GeoMap控件中绘制任意两点的断面图,结合钻孔的层编号绘制出每一层断面的封闭区域,最后对该封闭区域进行填充,结果表明该方法是一种实用、高效的绘制方法。     

利用椭球变换建立独立坐标系的方法

详细阐述了8种利用椭球变换建立独立坐标系的方法,推导了独立坐标系高程面与椭球面之间的相互关系,进而建立了椭球变换模型,减少了高程归化变形;并通过计算实例对其投影变形值进行分析,以探究不同方法间的特点与差异,得出了一些有益的结论。     

耀变体在射电波段的偏振研究

利用UMRAO数据库22个耀变体源的偏振数据,根据Lazarian&Pogosyan理论模型分析研究了耀变体射电波段的偏振随波长的变化,得出不同类的耀变体偏振随波长变化的原因。结果表明,与Lazarian&Pogosyan理论模型吻合较好。由此得出如下结论:(1)反常去偏振耀变体源中反常法拉第旋光起主导作用,反常去偏振相对较少;(2)热辐射与同步辐射混合作用,高频波段的偏振度小于低频波段的偏振度(反常去偏振);(3)当被观测波段波长小于吸积盘热辐射对应的维恩波长时,高频波段的偏振度大于低频波段的偏振度(常规去偏振)。     

快速射电暴的数据统计

快速射电暴于2007年首次在脉冲星巡天的历史数据中被发现,是一种在射电波段观测到的具有色散量的单个强脉冲,其特征为持续时间仅为若干毫秒,峰值流量密度可达到央斯基量级。类似于射电脉冲星的单个脉冲,但其色散显著超过同一视线方向上银河系内星际介质的预期最大值。对截止2018年6月帕克斯望远镜、绿岸望远镜、阿雷西博射电望远镜、UTMOST望远镜和ASKAP望远镜已探测到的52例快速射电暴进行了观测量统计分析,根据模型扣除银河系星际介质导致的色散量后,快速射电暴平均色散量为584.5 pc·cm^-3,暗示着快速射电暴来自河外。通过最佳拟合估算红移幂律分布谱dN/dF_obs=4.14±1.30×F■sky^-1·day^-1。根据分析结果预计,FAST望远镜使用19波束接收机后,其多科学目标同时巡天在经过一年时间内能发现大约10个快速射电暴,将有效地扩大样本数量,为快速射电暴研究提供重要信息。