Quality control algorithms for rainfall measurements

One of the basic requirements for a scientific use of rain data from raingauges, ground and space radars is data quality control. Rain data could be used more intensively in many fields of activity (meteorology, hydrology, etc.), if the achievable data quality could be improved. This depends on the available data quality delivered by the measuring devices and the data quality enhancement procedures. To get an overview of the existing algorithms a literature review and literature pool have been produced. The diverse algorithms have been evaluated to meet VOLTAIRE objectives and sorted in different groups. To test the chosen algorithms an algorithm pool has been established, where the software is collected. A large part of this work presented here is implemented in the scope of the EU-project VOLTAIRE (Validation of multisensors precipitation fields and numerical modeling in Mediterranean test sites).     

Using radar direct wave for concrete condition assessment: Correlation with electrical resistivity

This paper demonstrates that the direct wave of a radar ground-coupled antenna may be used for the nondestructive assessment of the physical condition of concrete, which directly influences the corrosion of the reinforcing bars in the structure. The validity of this method was evaluated by a comparison with the electrical resistivity method, which is frequently used for the evaluation of corrosion probability. Both methods were implemented in the laboratory on 72 concrete samples (25 × 25 × 8 cm³) with various degrees of saturation and chloride contamination levels. On-site investigations were also carried out on the concrete slab (1080 m²) of a car-park.The results of the laboratory tests show that the radar direct signal is strongly affected by variations in concrete moisture and chloride contamination level. The tests performed in real conditions confirm the good correlation between radar direct wave attenuation and electrical resistivity and, thus, the aptitude of the radar direct wave to detect concrete conditions leading to reinforcement corrosion.     

714SD多普勒雷达在强降水中的应用

本文针对近几年汕头地区出现的强降水天气，重点开展了多普勒天气雷达速度回波及其产品的应用研究，结合相应的天气背景、物理量变化对强度回波和速度场回波作一些分析，归纳总结出台风、冷锋锋面、暖切变、西南急流、脊后槽前辐合区、东风波等不同天气形势下强降水的类型及其回波特征，并尝试性地解释了一些特殊回波的风场结构和天气现象。     

基于目标时域散射特性的土地覆盖类型分类研究

目标散射特性随时间变化的规律称之为目标时域散射特性。目标时域散射特征是利用多时相雷达遥感图像进行目标识别的基础。本研究以广东肇庆为试验区,利用多时相单参数雷达图像进行土地覆盖类型分类研究,分析了试验区内典型植被的结构、形态及其散射机理等特征,总结了各类目标的时域散射特性,区分识别了多种目标,制作了土地覆盖类型分类图.     

The value of a physically based model versus an empirical approach in the prediction of ephemeral gully erosion for loess-derived soils

A data set on soil losses and controlling factors for 58 ephemeral gullies has been collected in the Belgian loess belt from March 1997 to March 1999. Of the observed ephemeral gullies, 32 developed at the end of winter or in early spring (winter gullies) and 26 ephemeral gullies developed during summer (summer gullies). The assessed data have been used to test the physically based Ephemeral Gully Erosion Model (EGEM) and to compare its performance with the value of simple topographical and morphological indices in the prediction of ephemeral gully erosion.Analysis shows that EGEM is not capable of predicting ephemeral gully cross-sections well. Although conditions for input parameter assessment were ideal, some parameters such as channel erodibility, critical flow shear stress and local rainfall depth showed great uncertainty. Rather than revealing EGEM's inability of predicting ephemeral gully erosion, this analysis stresses the problematic nature of physically based models, since they often require input parameters that are not available or can hardly be obtained.With respect to the value of simple topographical and morphological indices in predicting ephemeral gully erosion, this study shows that for winter gullies and summer gullies, respectively, over 80% and about 75% of the variation in ephemeral gully volume can be explained when ephemeral gully length is known. Moreover, when previously collected data for ephemeral gullies in two Mediterranean study areas and the data for summer gullies formed in the Belgian loess belt are pooled, it appears that one single length (L)–volume (V) relation exists (V=0.048 L^1.29; R²=0.91). These findings imply that predicting ephemeral gully length is a valuable alternative for the prediction of ephemeral gully volume. A simple procedure to predict ephemeral gully length based on topographical thresholds is presented here. Secondly, the empirical length–volume relation can also be used to convert ephemeral gully length data extracted from aerial photos into ephemeral gully volumes.     

Delineation of sulphide ore-zones by borehole radar tomography at Hellyer Mine, Australia

Velocity and absorption tomograms are the two most common forms of presentation of radar tomographic data. However, mining personnel, geophysicists included, are often unfamiliar with radar velocity and absorption. In this paper, general formulae are introduced, relating velocity and attenuation coefficient to conductivity and dielectric constant. The formulae are valid for lossy media as well as high-resistivity materials. The transformation of velocity and absorption to conductivity and dielectric constant is illustrated via application of the formulae to radar tomograms from the Hellyer zinc–lead–silver mine, Tasmania, Australia. The resulting conductivity and dielectric constant tomograms constructed at Hellyer demonstrated the potential of radar tomography to delineate sulphide ore zones.     

Close range radar remote sensing of concrete degradation in a textile factory floor

This paper describes a GPR study carried out with the aim of evaluating deterioration of concrete floors in a textile factory. In the past, production process waste was spilt onto the floor of the factory. A slow but continuous action from this waste on the concrete caused a significant variation in its porosity that can be detected by studying changes in the GPR reflected pulse. A simple synthetic model was developed in order to obtain information about how the response of the GPR antenna pulse is affected by changes in the porosity of concrete. It should also be taken into account the different conditions of the factory floor at the time of testing, as it had been isolated from the action of waste for many years. The heterogeneous conditions of the floor and the simplicity of the model used did not allow for an accurate estimate of the porosity; however, it was possible to map degraded areas of the floor in relationship to changes in the reflected signal. Core samples taken showed that some areas had concrete porosity of 15% and up to 25%, which is closer to that of sand than to concrete.     

基于改进全变差正则化的GPR多尺度全波形双参数同步反演

针对探地雷达（GPR）双参数全波形反演中电导率反演精度差、双参数存在串扰现象、反演计算量大、易陷入局部极值等问题.作者将具有多参数调节功能的L-BFGS算法引入到GPR时间域全波形反演中,它避免了对Hessian矩阵的直接存储与精确求解,减小了存储量和计算量.结合参数调节因子的选取,有效减小了同步反演时介电常数与电导率的串扰影响,在不降低介电常数反演精度的前提下,提高电导率参数的反演精度.通过在反演目标函数中加载改进全变差正则化方法,提高了反演的稳定性,使目标体边缘轮廓更加清晰.首先以简单模型为例,对比了单尺度反演与多尺度串行反演策略的优劣,说明多尺度串行反演有利于逐步搜索全局最优解;而开展参数调节因子的选取实验,说明合适的参数调节因子可以有效改善介质电导率的反演精度;测试了不同正则化的反演效果,表明改进全变差正则化能提高反演稳定性,显著降低模型重构误差.最后,分别对含噪合成数据和实测数据进行了反演测试,说明本文提出的多尺度、双参数反演具有较强的鲁棒性,能提供更丰富的信息约束,重构图像界面清晰、反演效果好.     

一种使用正交调制互补码的新方法

本文提出一种新的方案,可以用正交调制的方法,同时发射两组互补码,从而使得该系统对目标信号相关时间的要求由历来的“必须远大于雷达重复周期”降低到”只要远大于码的总长”。本文给出了用计算机进行仿真的结果。     

Stochastic estimation of facies using ground penetrating radar data

Explicitly defining large-scale heterogeneity is a necessary step of groundwater model calibration if accurate estimates of flow and transport are to be made. In this work, neural networks are used to estimate radar facies probabilities from ground penetrating radar (GPR) images, yielding stochastic facies-based models that honour the large-scale architecture of the subsurface. For synthetic GPR images, a neural network was able to correctly identify radar facies with an accuracy of approximately 90%. Manual interpretation of a set of 450 MHz GPR field data from the Borden aquifer resulted in the identification of four radar facies. Of these, a neural network was able to identify two facies with an accuracy of near 80% and one with an accuracy of 44%. The neural network was not able to identify the fourth facies, likely due to the choice of defining facies characteristics. Sequential indicator simulation was used to generate facies realizations conditioned to the radar facies probabilities. Numerical simulations indicate that significant improvements in the prediction of solute transport are possible when GPR is used to constrain the facies model compared to using well data alone, especially when data are sparse.This work was supported by funding to R. Knight under Grant No. DE-FG07–00ER15118-A000, Environmental Management Science Program, Office of Science and Technology, Office of Environment Management, United States Department of Energy (DOE). However, any opinions, findings, conclusions, or recommendations expressed herein are those of the authors and do not necessarily reflect the views of DOE. Further support was provided by a Stanford Graduate Fellowship to S. Moysey. The authors would also like to thank James Irving for his assistance with processing of the radar data.