Analytical approach for sheet flow transport in purely acceleration-skewed oscillatory flow

An instantaneous analytical approach is developed to predict sheet flow transport in purely acceleration-skewed oscillatory flow. The approach is derived from exponential approximations of velocity and concentration profiles above a mobile seabed, and it particularly considers factors of phase lead; phase lag (i.e. phase residual and phase shift); acceleration modification; and asymmetries in shear stress, roughness height, and boundary layer development. The approach can predict net boundary layer flow above a mobile seabed, and can revert to the classical bedload model. Instantaneous and net sediment transport rates are studied using the approach. The instantaneous sediment transport rate in an onshore flow stage can be approximated by a power function of velocity in which the exponent is confirmed to range between 1 and 5 with a decrease in the phase residual. The net sediment transport rate predicted using the approach is validated using a considerable amount of measured data, and compared with existing instantaneous and half-period type models that consider the phase lag or acceleration modification. For the net sediment transport rate in purely acceleration-skewed oscillatory flow, the phase residual is less important than the acceleration-skewed boundary layer difference between onshore and offshore acceleration stages.     

Comparative Assessment of Sludge Pre‐Treatment Techniques to Enhance Sludge Dewaterability and Biogas Production

Effectiveness of ultrasonication, microwave technologies, and enzyme addition prior to anaerobic digestion is investigated using sludge samples taken from the secondary settling tank of a domestic wastewater treatment plant to improve methane production, enhance dewaterability characteristics of the sludge, and to reduce excess sludge. Microwave pre‐treatment (1500 W, 10 min at 175 °C) results in better extra digester performance (compared to the control reactor) in terms of methane production (25 m³ ton^?1 suspended solids (SS)) than ultrasound (no improvement) and enzyme pre‐treatment (11 m³ ton^?1 SS). While methane production is not improved as a result of ultrasonication pre‐treatment (15 000 kJ kg^?1 SS), a noticeable increase (19%) is observed in the case of microwave pre‐treatment. Higher compactibility values are obtained after ultrasonication and microwave application compared to the control (i.e., from 7.1 to 8.7 and 9.2%, respectively) before anaerobic digestion. Although ultrasonication and microwave application decrease the dewaterability of the raw sludge (capillary suction time (CST) from 827 to 1364 and 2290 s, respectively), similar dewaterability results are obtained at the end of the anaerobic digestion process for all pre‐treated sludge samples. An economic assessment of this study shows that pre‐treatment with microwave results in more than 10‐fold less net cost compared to the enzyme application.     

Sorption and Chemical Reactions of PAHs with Dissolved Humic Substances and Related Model Polymers

Sorption coefficients measured for PAHs on dissolved humic substances by SPME and FQT were found to be inevitably different and method‐dependent – SPME provides activity‐based and FQT concentration‐based sorption coefficients. Poly(acrylic acid) esters as well‐defined model polymers were used in sorption experiments, leading to the conclusion that short aliphatic chains are more effective in binding PAHs than aromatic moieties. FQT was inappropriate to measure sorption coefficients for the interaction of pyrene with poly(acrylic acid) esters but the experiments revealed a characteristic shift in the fluorescence spectrum. Using pyrene as a probe for the molecular environment in the sorbed state, the observed spectral shift indicated a highly hydrophobic microenvironment. The empirical relationships between lg K_DOC and lg K_OW were generalized on the basis of a modified Flory‐Huggins concept. Introducing only one sorbent‐specific parameter, the solubility parameter δ_DOM, the calculation of sorption coefficients became possible for a wide range of HOCs using fundamental data readily available from the literature. Long‐term experiments showed that reactive PAHs (such as acenaphthylene and 9‐methylanthracene) are able to react with HAs under strictly abiotic and anoxic conditions, whereas less reactive PAHs (such as naphthalene and dihydroanthracene) do not form bound residues. The HA reveals two functions in the interaction, behaving as a reaction partner and as a protecting ligand.     

GPS相位平滑伪距差分定位中若干问题的探讨

伪距差分定位方法是利用基准站的伪距差对流动站的观测伪距进行改正,得到流动站改正后的伪距观测值后再解算流动站坐标。而利用载波相位历元间的差值对伪距进行平滑,可以减少测量噪声从而提高定位精度,但这都需要在一定的条件下才能得到保证。比如粗差的探测与周跳修复（算法中要利用载波相位观测量）等问题,介绍了自行编制的软件对相关问题的处理方法,并通过试验验证了方法的有效性。     

透射边界高频耦合失稳机理及稳定实现——SH波动

就大型近场波动的高效数值模拟而言,稳定实现高阶人工边界是一个尚未圆满解决的问题.本文针对使用多次透射公式的SH波动集中质量有限元模拟,依据GKS定理的群速度解释,进一步阐明了人工边界与内域离散格式耦合所导致高频失稳的机理,即两者支持群速度指向内域的外行高频平面谐波,波动能量自发地从人工边界进入內域,从而导致失稳,而这类谐波是由集中质量有限元离散引入的.本文提出了消除此种耦合失稳的一种方法:通过修改有限元刚度阵来改变内域离散格式,并保证修改格式的精度不低于原有格式的精度.理论分析和数值实验表明此法能稳定实现透射边界.本文研究结果具有推广应用前景.     

Quick Phase Identification for Dense Seismic Array with Aid from Long Term Phase Records of Co-located Sparse Permanent Stations

The phase identification and travel time picking are critical for seismic tomography, yet it will be challenging when the numbers of stations and earthquakes are huge. We here present a method to quickly obtain P and S travel times of pre-determined earthquakes from mobile dense array with the aid from long term phase records from co-located permanent stations. The records for 1 768 M ≥ 2.0 events from 2011 to 2013 recorded by 350 ChinArray stations deployed in Yunnan Province are processed with an improved AR-AIC method utilizing cumulative envelope and rectilinearity. The reference arrivals are predicted based on phase records from 88 permanent stations with similar spatial coverage, which are further refined with AR-AIC. Totally, 718 573 P picks and 512 035 S picks are obtained from mobile stations, which are 28 and 22 times of those from permanent stations, respectively. By comparing the automatic picks with manual picks from 88 permanent stations, for M ≥ 3.0 events, 81.5% of the P-pick errors are smaller than 0.5 second and 70.5% of S-pick errors are smaller than 1 second. For events with a lower magnitude, 76.5% P-pick errors fall into 0.5 second and 69.5% S-pick errors are smaller than 1 second. Moreover, the Pn and Sn phases are easily discriminated from directly P/S, indicating the necessity of combining traditional auto picking and integrating machine learning method.     

非饱和土中剪切S波的传播特性分析

基于对非饱和多孔介质的研究成果,考虑孔隙中的液相和气相的相互影响,研究非饱和土地基中剪切S波的传播特性。通过非饱和土中固相、液相和气相的质量平衡方程、动量平衡方程和非饱和土有效应力原理,建立问题的弹性波动方程,经过理论推导给出非饱和土中剪切S波的弥散特征方程。通过数值算例分析剪切S波的波速和衰减系数随饱和度、频率和固有渗透系数等因素的变化规律。结果表明,剪切S波的波速几乎不受饱和度的影响,但其随着频率的增大而减小,随着固有渗透系数的增大先不变后增大;剪切S波的衰减系数随着饱和度和频率的增加均增大,而随着固有渗透系数的增大先不变后增大最后减小。     

利用远震研究四川盆地及其周缘瑞利面波相速度和方位各向异性

基于四川盆地及周边的245个宽频带台站2010年9月—2014年9月期间的远震记录,提取双台路径瑞利面波相速度频散资料,反演得到四川盆地20～120s的高分辨率瑞利面波相速度及各向异性空间分布.在丰富区域地球物理基础数据的同时,结合已有研究成果对地壳上地幔变形耦合进行探讨,结果表明短周期(20～30s)的相速度分布与四川盆地的地质构造特征相吻合,作为川滇地块、松潘—甘孜地块和四川盆地之间的边界——龙门山断裂带和鲜水河断裂带对上述三个地块上地壳的速度结构具有明显的控制作用;松潘—甘孜地块,特别是川滇地块中下地壳普遍表现为明显的低速异常,表明中下地壳相对软弱;而四川盆地的中下地壳整体呈现相对高速,表明四川盆地具有相对坚硬的中下地壳.研究区域东南角接近北扬子地块与南扬子地块的缝合部位,呈现高速异常.四川盆地南部和东南邻区不同周期均具有较强的各向异性,且快波方向较为一致,反映这些地区不同深度变形耦合较好.四川盆地西部、北部及东北部邻区,不同周期的各向异性快波方向变化较大,不同深度变形耦合较差.这些特征与绕喜马拉雅东构造结的物质流动被扬子地块的高速地壳阻挡的宏观认识基本一致.     

利用标准时频变换方法在强噪声环境下无偏拾取地震P波、S波到时

地震P波、S波到时是精确分析地震水平位置、深度与速度结构等的重要参数,如何准确拾取P波和S波到时是地震学的一项重要的基础工作.大数据量与强噪声环境给地震到时的自动拾取带来了很大挑战.在频率域中可将信号与噪声分离,但会造成震相的偏移.针对上述问题,本文在STA/LTA、AIC方法的基础上,引入了标准时频变换(Normal...     

太湖水体的总磷分布及湖流对其影响的数值研究

用数值模拟的方法研究了太湖水体中ＴＰ分布特征及湖流对其影响,推导,建立了包括平流,水平扩散,沉降和底泥释放的浅水湖泊中污染物浓度分布计算的二维迎风有限元数值模式,并在给定若干点源条件下计算各种稳态流场下太湖水体中的ＴＰ分布。