Flexural and gravity modelling of the Mérida Andes and Barinas–Apure Basin, Western Venezuela

The kinematic evolution of the Barinas–Apure Basin and the southern Mérida Andes from Lower Miocene to the Present is numerically modelled using flexural isostatic theory and geophysical and geological data. Two published regional transects are used to build up a reference section, which is then used to constrain important parameters (e.g. shortenings and sedimentary thicknesses) for the flexural modelling. To control the location of the main fault system in the flexural model earthquake information is also used. The estimated flexural elastic thickness of the South American lithosphere beneath the Barinas–Apure Basin and the Mérida Andes Range is 25 km. The value for the final total shortening is 60 km. The flexural isostatic model shows that the Andean uplift has caused the South American lithosphere subsidence and the development of the Barinas–Apure Basin.In addition, gravity modelling was used to understand deep crustal features that could not be predicted by flexural theory. Consequently, the best-fit flexural model is used to build a gravity model across the Mérida Andes and the Barinas–Apure Basin preserving the best-controlled structural features from the flexural modelling (e.g. basin wavelength and depth) and slightly changing the main bodies density values and deep crustal structures. The final gravity model is intended to be representative of the major features affecting the gravity field in the study area. The predicted morphology in the lower crustal level of the final gravity model favours the hypothesis of a present delamination or megathrust of the Maracaibo crust over the South American Shield. This process would use the Conrad discontinuity as a main detachment surface within an incipient NW dipping continental subduction.     

Variations of U and Sr isotope ratios in Alsace and Luxembourg rain waters: origin and hydrogeochemical implications

Major and trace element concentrations, as well as Sr and U isotope ratios, were measured in rainwater samples collected in three different locations in Alsace (East of France) and Luxembourg: a mid-altitude mountain site (Aubure Environment HydroGeochemical Observatory), an urban site (Strasbourg) and a peri-urban site located in an area of well developed industrial activity (Esch-sur-Alzette in Luxembourg). Results highlight the quite high spatial and temporal variability of the chemical and isotopic characteristics of rainwater at the regional scale. They also suggest a quite systematic contribution of a local component in the chemical composition of rainwater. In urban and peri-urban sites, the local component is certainly linked to human activities, as it is well illustrated in this study with the Esch-sur-Alzette samples. On the other hand, for the Aubure site, i.e. a small forested watershed of mid-altitude mountain, data presented in this study demonstrate the influence of the vegetation on the chemical composition of rainwater for alkali and calc-alkali elements, as well as for the Sr isotope ratios. Such a result questions the reliability of the method classically used to estimate the rainwater contribution on the river chemical budget. In addition, data of the present study confirm the very low content of uranium in rainwater and demonstrate, especially through the U isotope analysis of Aubure rainwater, the negligible effect of rainwater on U budget of river waters. This work thus outlines the property of U to be a geochemical tracer specific of weathering fluxes carried by rivers. To cite this article: F. Chabaux et al., C. R. Geoscience 337 (2005).     

Interpretation of gamma-ray logs: The distribution of uranium in carbonate platform

High gamma-radioactivity in carbonates is usually ascribed to uranium of detrital minerals and organic matter, and to thorium and potassium of clays. The present study based on Urgonian marls and marly limestones (France) shows that some of the most radioactive values correspond instead to some ‘pure’ limestones. These peaks are generally associated with a sequence boundary or a maximum flooding surface. Low-level γ-spectrometry and ICP–MS analyses show that although high radioactivities are mostly associated with uranium, there is no obvious correlation between uranium enrichment and lithology. Also, correlation between high radioactivity and argillaceous beds might not be systematic. To cite this article: M.C. Raddadi et al., C. R. Geoscience 337 (2005).     

Identifying sources of groundwater recharge in the Merguellil basin (Tunisia) using isotopic methods: implication of dam reservoir water accounting

Thirty-two groundwater samples collected from the Merguellil Wadi basin (central Tunisia) complemented by the Haouareb dam reservoir water samples have been isotopically analysed in order to investigate the implication of the reservoir water to recharging the aquifer, and also to infer the sources, relative ages and mixing processes in the aquifer system. Plots of the stable isotopes data against the local meteoric lines of Tunis-Carthage and Sfax indicate a strong implication of the dam water noticeable up to a distance of 6–7 km. A contribution as much as 80% of the pumped water has been evidenced using isotopic mass balance. In addition, poorly distinguished water clusters in the stable isotope plots, but clearly identified in the diagrams δ¹⁸O versus ³H and ³H versus ¹⁴C, indicate various water types related to sources and timing of recharge. The isotopic signatures of the dam accounting water, the “old” and “native” recharged waters, have been evidenced in relation to their geographical distribution and also to their radiogenic isotopes (³H and ¹⁴C) contents. In the south-western part of the aquifer, mixing process occurs between the dam reservoir water and both the “old” and “native” water components.     

Amphibole Ar/Ar Geochronology from the Okcheon Metamorphic Belt, South Korea and its Tectonic Implications

An understanding of the Okcheon Metamorphic Belt (OMB) in South Korea is central to unraveling the tectono-metamorphic evolution of East Asia. Amphibole-bearing rocks in the OMB occur as calcsilicate layers and lenses in psammitic rocks, in the psammitic rocks themselves, and in the mafic volcanic layers and intrusives. Most amphiboles fail to show ⁴⁰Ar/³⁹Ar plateau ages; those that do have ages ranging from 132 to 975 Ma. The disturbed age pattern and wide variation in ⁴⁰Ar/³⁹Ar ages can be related to metamorphic grade, retrograde chemical reactions, excess Ar and amphibole composition. The oldest age (975 Ma) can be interpreted either as an old igneous or metamorphic age predating sedimentation or a false age caused by excess Ar. The youngest age of 132 Ma and the disturbed age pattern found in amphiboles from rocks located close to Jurassic granitoids are the result of retrograde thermal metamorphic effects accompanying intrusion of the granitoids. Some medium- or coarse-grained amphiboles in the calcsilicates are aggregates of fine-grained crystals. As a result, they are heterogeneous and prove to be readily affected by excess Ar. A disturbed age pattern in amphiboles from the calcsilicates occurring in the high-grade metamorphic zone may also be the product of excess Ar. On the other hand, the disturbed pattern of amphiboles present in the calcsilicates from the low-grade metamorphic zone could arise from both excess Ar and mixed ages. However, amphiboles from psammitic rocks and some calcsilicates in the high-grade metamorphic zone and in intrusive metabasites display real plateau ages of 237 to 261 Ma. The temperature conditions in the high-grade metamorphic zone were higher than the argon closing temperature for amphibole, and the amphiboles in this zone give plateau ages only when they are homogeneous in composition, lack excess Ar, and have not been thermally affected by intrusion of the granitoids. The unmodified ⁴⁰Ar/³⁹Ar ages prove rather younger than the age of the Late Paleozoic metamorphic event of 280 to 300 Ma, but they are close to muscovite K-Ar ages of 263 to 277 Ma. These ⁴⁰Ar/³⁹Ar amphibole ages are interpreted as the time of cooling that followed the main regional, intermediate-P/T metamorphic climax. The results demonstrate that interpretation of ⁴⁰Ar/³⁹Ar amphibole ages in an area subjected to several metamorphic events can be accomplished only by undertaking a thorough tectono-metamorphic study, accompanied by detailed chemical analysis of the amphiboles.     

Structure de socle,sismostratigraphie et héritage structural au cours du rifting au niveau de la marge d'Ifni/Tan-Tan (Maroc sud-occidental)

Seismic reflection profiles from the Ifni/Tan-Tan Atlantic margin of southern Morocco, interpreted in the light of well data and field geology from the Western Anti-Atlas, allowed us to establish the seismostratigraphic framework of the syn-rift series and to reveal (i) a compressional structural style in the pre-Triassic basement similar to that established in the adjacent outcropping onshore basement but with an opposed western vergence, (ii) the importance of inherited anterior structures in the formation of Triassic-Liassic rift structures and (iii) an east–west propagation of these rift structures. To cite this article: N. AbouAli et al., C. R. Geoscience 337 (2005).     

Using CRD method for quantification of groundwater recharge in the Gaza Strip, Palestine

Rainfall is the main source of groundwater recharge in the Gaza Strip area in Palestine. The area is located in the semi-arid zone and there is no source of recharge other than rainfall. Estimation of groundwater recharge from rainfall is not an easy task since it depends on many uncertain parameters. The cumulative rainfall departure (CRD) method, which depends on the water balance principle, was used in this study to estimate the net groundwater recharge from rainfall. This method does not require much data as is the case with other classical recharge estimation methods. The CRD method was carried out using optimisation approach to minimise the root mean square error (RMSE) between the measured and the simulated groundwater head. The results of this method were compared with the results of other recharge estimation methods from literature. It was found that the results of the CRD method are very close to the results of the other methods, but with less data requirements and greater ease of application. Based on the CRD method, the annual amount of groundwater recharge from rainfall in the Gaza Strip is about 43 million m³. An erratum to this article can be found at     

Validating the ability of the discontinuous deformation analysis method to model normal P‐wave propagation across rock fractures

The effects of fractures on wave propagation problems are increasingly abstracting the attention of scholars and engineers in rock engineering field. This study aims to fully validate the ability of discontinuous deformation analysis (DDA) to model normal P‐wave propagation across rock fractures. The effects of a single fracture and multiple parallel fractures are all tested. The results indicate that DDA can accurately reflect the fracture effects, including the fractures stiffness, the fracture spacing and the fracture number, and the effects of incident wave frequency on one‐dimensional P‐wave propagation problems. Thus, DDA is able to deal well with normal incident P‐wave propagation problems. Copyright © 2017 John Wiley & Sons, Ltd.     

Fluid generation and evolution during exhumation of deeply subducted UHP continental crust: Petrogenesis of composite granite–quartz veins in the Sulu belt,China

Composite granite–quartz veins occur in retrogressed ultrahigh pressure (UHP) eclogite enclosed in gneiss at General's Hill in the central Sulu belt, eastern China. The granite in the veins has a high‐pressure (HP) mineral assemblage of dominantly quartz+phengite+allanite/epidote+garnet that yields pressures of 2.5–2.1 GPa (Si‐in‐phengite barometry) and temperatures of 850–780°C (Ti‐in‐zircon thermometry) at 2.5 GPa (~20°C lower at 2.1 GPa). Zircon overgrowths on inherited cores and new grains of zircon from both components of the composite veins crystallized at c. 221 Ma. This age overlaps the timing of HP retrograde recrystallization dated at 225–215 Ma from multiple localities in the Sulu belt, consistent with the HP conditions retrieved from the granite. The ε_Hf(t) values of new zircon from both components of the composite veins and the Sr–Nd isotope compositions of the granite consistently lie between values for gneiss and eclogite, whereas δ¹⁸O values of new zircon are similar in the veins and the crustal rocks. These data are consistent with zircon growth from a blended fluid generated internally within the gneiss and the eclogite, without any ingress of fluid from an external source. However, at the peak metamorphic pressure, which could have reached 7 GPa, the rocks were likely fluid absent. During initial exhumation under UHP conditions, exsolution of H₂O from nominally anhydrous minerals generated a grain boundary supercritical fluid in both gneiss and eclogite. As exhumation progressed, the volume of fluid increased allowing it to migrate by diffusing porous flow from grain boundaries into channels and drain from the dominant gneiss through the subordinate eclogite. This produced a blended fluid intermediate in its isotope composition between the two end‐members, as recorded by the composite veins. During exhumation from UHP (coesite) eclogite to HP (quartz) eclogite facies conditions, the supercritical fluid evolved by dissolution of the silicate mineral matrix, becoming increasingly solute‐rich, more ‘granitic’ and more viscous until it became trapped. As crystallization began by diffusive loss of H₂O to the host eclogite concomitant with ongoing exhumation of the crust, the trapped supercritical fluid intersected the solvus for the granite–H₂O system, allowing phase separation and formation of the composite granite–quartz veins. Subsequently, during the transition from HP eclogite to amphibolite facies conditions, minor phengite breakdown melting is recorded in both the granite and the gneiss by K‐feldspar+plagioclase+biotite aggregates located around phengite and by K‐feldspar veinlets along grain boundaries. Phase equilibria modelling of the granite indicates that this late‐stage melting records P–T conditions towards the end of the exhumation, with the subsolidus assemblage yielding 0.7–1.1 GPa at <670°C. Thus, the composite granite–quartz veins represent a rare example of a natural system recording how the fluid phase evolved during exhumation of continental crust. The successive availability of different fluid phases attending retrograde metamorphism from UHP eclogite to amphibolite facies conditions will affect the transport of trace elements through the continental crust and the role of these fluids as metasomatic agents interacting with the mantle wedge in the subduction channel.