对我国35年来珠峰高程测定成果的思考

20世纪60年代以来，我国曾单独或与外国合作，在1966年，1975年，1992年，1998年及1999年对珠穆朗玛峰高程进行了5次测定，开展了大规模的大地测量外业作业、数据处理和科学研究，其中包括天文、重力、平面、高程和气象等方面。本文对我国近35年来的珠峰高程测定的成果和最新进展作分析研究，将我国35年来所精确测定的珠峰峰顶雪面高程值取中数，以我国60(似)大地水准面为基准面，得珠峰海拔高为8849.0m±0.5m；若以接近全球高程系统的EGM96大地水准面为基准面，珠峰海拔高为8850.1m±0.5m。     

珠峰及邻近区域第四次大地测量

叙述了我国大地测量工作者于 1998年对珠穆朗玛峰及邻近区域进行的第四次大规模的大地测量外业概况和取得的成果 ,以及数据处理方法和最终结果。经过对 1998、196 6 - 196 8、1975、1992年珠峰及邻近区域四次大地测量数据综合分析 ,从地学方面进行研究 ,得出青藏块体在印度板块的推动下 ,仍向北东东方向运动 ;珠峰地区相对垂直运动在整体抬升的过程中伴有波浪式的起伏等结论。     

滇中南无量山种子植物区系联系及其地位

无量山种子植物区系迄今为止含207科,1027属,2548种,极其丰富,通过对区系相似性系数、云南各自然小区的共有种频率以及中国特有属三方面的分析,把无量山置于东亚植物区的中国-喜马拉雅森林植物亚区的云南高原地区。     

Mobility of rare-earth elements and copper during shear-zone-related retrograde metamorphism

In Mid Proterozoic crystalline rocks of the Mount Isa Inlier, around Cloncurry, Australia, 2000 km² of alteration and brecciation are the product of high-temperature (> 450 °C) concentrated saline solution activity. During retrogression, this fluid was locally responsible for mobility of V, Y, Nb and light rare-earth elements (15 × enrichment). Copper and S were leached during alteration and this may have been a significant source of components in nearby Cu-Au deposits. Similar rare-earth-element behaviour has been observed in the hematite breccias which host Cu-sulfides at the giant Olympic Dam Cu-Au deposit.     

大别山东、北段热量资源短期考察资料的序列延长

本文根据三个月的短期气温资,利用自然止交函数展开和最小二乘方法按不同季节分别对大别山东段和北段的气温资料进行延长,得到了该地区一年内的旬平均气温,其相对误差在4.1%—13.9%之间。     

一场典型的冰雪雨水泥石流过程

1989年7月26日,贡嘎山东坡南关沟发生了一场典型的冰雪雨水泥石流。它下行30多公里后堵塞大渡河,造成直接经济损失245万元。这场泥石流历时约3小时,持续流动时间2小时。到达大渡河时的流速9.4米/秒,最大流量6768.0立方米/秒,总径流量1716.4万立方米,总输沙量627.0万立方米,残留沉积物总方量310.4万立方米(其中泥石流堵塞大渡河的扇形地方量30.0万立方米),弯道爬高15.5—16.5米。输往堵河扇形地下游方的固体物质方量是扇形地方量的19.9倍,泥石流尾流作用强烈。     

贺兰山东麓冲沟裂点溯源迁移速率及其形成年龄的讨论

本文通过对洪积扇断层崖上升盘冲沟裂点位置的实测和研究,讨论了贺兰山东麓地区影响裂点溯源迁移速率的主要因素,建立了这一地区裂点位置与形成年龄关系的公式。据此确定贺兰山东麓断层全新世以来至少发生过三次类似1739年平罗大地震的古地震事件,强震的重复间隔时间大约在2500年至3500年     

Effects of eruption history and cooling rate on lava dome growth

To better understand the factors controlling the shapes of lava domes, laboratory simulations, measurements from active and prehistoric flows and dimensional analysis were used to explore how effusion history and cooling rate affect the final geometry of a dome. Fifty experiments were conducted in which a fixed volume of polyethylene glycol wax was injected into a tank of cold sucrose solution, either as one continuous event or as a series of shorter pulses separated by repose periods. When the wax cooling rates exceeded a critical minimum value, the dome aspect ratios (height/diameter) increased steadily with erupted volume over the course of a single experiment and the rate at which height increased with volume depended linearly on the time-averaged effusion rate. Thus the average effusion rate could be estimated from observations of how the dome shape changed with time. Our experimental results and dimensional analyses were compared with several groups of natural lava flows: the recently emplaced Mount St Helens and Soufrière domes, which had been carefully monitored while active; three sets of prehistoric rhyolite domes that varied in eruptive style and shape; and two sets of Holocene domes with similar shapes, but different compositions. Geometric measurements suggest that dome morphology can be directly correlated with effusion rate for domes of similar composition from the same locality, and that shape alone can be related to a dimensionless number comparing effusion rate and cooling rate. Extrapolation to the venusian pancake domes suggests that they formed from relatively viscous lavas extruded either episodically or at average effusion rates low enough to allow solidified surface crust to exert a dominating influence on the final morphology.     

新疆博罗霍洛山地区上志留统博罗霍洛山组沉积构造背景分析

新疆中天山西段的博罗霍洛山地区,在早古生代具有裂陷带性质。上志留统博罗霍洛山组形成于该裂陷带的最后闭合阶段,具有其特殊的形成时间和沉积特征。通过对该组地层的沉积学、岩石学及地球化学等方面的分析,本文较深入地讨论了其沉积环境及其沉积构造背景。认为该组岩石为浊流沉积物,其形成与活动性较强的大陆边缘区有着密切的关系,其陆源物质来源以当时存在于裂陷带以南的具有一定陆壳厚度和中等成熟度的“伊宁古陆”区为主。     

Mt. Etna volcano high-resolution topography: airborne LiDAR modelling validated by GPS data

High-resolution digital topography is essential for land management and planning in any type of territory as well as the reproduction of the Earth surface in a geocoded digital format that allows several Digital Earth applications. In a volcanic environment, Digital Elevation Models are a valid reference for multi-temporal analyses aimed to observe frequent changes of a volcano edifice and for the relative detailed morphological and structural analyses. For the first time, a DTM (Digital Terrain Model) and a DSM (Digital Surface Model) covering the entire Mt. Etna volcano (Italy) derived from the same airborne Light Detection and Ranging (LiDAR) are here presented. More than 250 million 3D LiDAR points have been processed to distinguish ground elements from natural and anthropic features. The end product is the highly accurate representation of Mt. Etna landscape (DSM) and ground topography (DTM) dated 2005. Both models have a high spatial resolution of 2?m and cover an area of 620?km². The DTM has been validated by GPS ground control points. The vertical accuracy has been evaluated, resulting in a root-mean-square-error of ±?0.24?m. The DTM is available as electronic supplement and represents a valid support for various scientific studies.