Capillary pressure for the sand–CO2–water system under various pressure conditions. Application to CO2 sequestration

Accurate modeling of storage of carbon dioxide (CO₂) in heterogeneous aquifers requires experiments of the capillary pressure as function of temperature and pressure. We present a method with which static drainage and imbibition capillary pressures can be measured continuously as a function of saturation at various temperature (T) and pressure (P) conditions. The measurements are carried out at (T, P) conditions of practical interest. Static conditions can be assumed as small injection rates are applied. The capillary pressure curves are obtained for the unconsolidated sand–distilled water–CO₂ system. The experimental results show a decrease of drainage and imbibition capillary pressure for increasing CO₂ pressures and pronounced dissolution rate effects for gaseous CO₂. Significant capillary pressure fluctuations and negative values during imbibition are observed at near critical conditions. The measurement procedure is validated by a numerical model that simulates the experiments.     

水溶性污染物在土壤中转化的原位实验方法

建立了一种研究水溶性污染物在土壤中运转化的原位实验方法，该方法已成功地应用于研究黄土中氨氮的运移转化规律，克服了土柱实验存在的破坏土壤结构及氧化还原电位发生变化等所引起的实验误差。     

如何利用计算机技术进行地图投影变换

在目前流行的计算机制图中，必须面对如何解决使用不同投影的地图资料的问题，本文从实际应用的角度出发，介绍并讨论解决方法及应用手段。     

海洋风暴形成的一种动力学机制

文中从观测统计学、瞬变涡动能量学和 MM5中尺度数值模拟角度 ,研究了海洋风暴 (爆发性气旋 )形成的气候特征及其可能的动力学机制 ,揭示了一幅爆发性发展的物理图像。结果表明 ,在冷季大气特别是日本以东洋面上大气特有的热力气候背景下 ,通过同海洋风暴过程相联系的涡动热通量 vθ的向极地输送 (- vθ· θm>0 ) ,将季节尺度的时间平均有效位能向瞬变涡旋时间尺度的涡动有效位能转换 ,是海洋风暴形成的主要动力机制。在该过程中转换来的具有最大贡献的涡动有效位能 ,连同具有次大贡献的积云加热制造的涡动有效位能(q3 )一起 ,通过暖异常区 (α >0 )暖湿空气上升运动 (-ω >0 )的斜压转换 (-ωα) ,促使涡动动能增长。同时 ,补充的涡动有效位能又加强了暖异常区的暖湿空气上升运动 ,进而产生积云对流活动及其潜热释放的正反馈过程 ,最终导致涡动动能急剧增长和海洋风暴的形成。海-气潜热输送的作用是在风暴形成初期提供后来积云尺度对流活动及潜热释放的水汽潜力。研究还表明 ,海洋风暴主要发生在冷季月份 1 3 0°E以东的中高纬洋面上 ,这种对特定季节和特定海域的依赖性是大气和海洋气候背景的动力 /热力共同作用的结果     

Measured And Simulated Latent And Sensible Heat Fluxes At Two Marine Sites In The Baltic Sea

In this study, turbulent heat flux data from two sites within the Baltic Sea are compared with estimates from two models. The main focus is on the latent heat flux. The measuring sites are located on small islands close to the islands of Bornholm and Gotland. Both sites have a wide wind direction sector with undisturbed over-water fetch. Mean parameters and direct fluxes were measured on masts during May to December 1998.The two models used in this study are the regional-scale atmospheric model HIRLAM and the ocean model PROBE-Baltic. It is shown that both models overestimate the sensible and latent heat fluxes. The overestimation can, to a large extent, be explained by errors in the air-water temperature and humidity differences. From comparing observed and modelled data, the estimated 8-month mean errors in temperature and humidity are up to 1 °C and 1 g kg^-1, respectively. The mean errors in the sensible and latent heat fluxes for the same period are approximately 15 and 30 W m^-2, respectively.Bulk transfer coefficients used for calculating heat and humidity fluxes at the surface were shown to agree rather well with the measurements, at least for the unstable data. For stable stratification, the scatter in data is generally large, and it appears that the bulk formulation chosen overestimates turbulent heat fluxes.     

Short-term precursor of the geomagnetic horizontal field transfer functions

IntroductionThe history of studying the changes in deep geoelectric conductivity of an earthquake preparation using the parameters of geomagnetic short-period variations has been about 30 years. At first, Japanese calculated the real transfer functions as well as the a and b coefficients of Parkinson vector by taking the measurement of graph and using empirical formula. There are some examples, such as the 1923 Kanto M=7.9 earthquake (Yanagihara, 1972), the 1966 Tashkent M=5.5 earthquake, t…     

Numerical modeling calculation for the spatial distribution characteristics of horizontal field transfer functions

Introduction There are two kinds of methods for the mathematic study on electro-magnetic induction in geo-field: one is analytic method, such as integral equation method; the other is numerical model-ing method, such as finite difference method and finite element method. The analytic method can only be applied to the conductor with very simple shape, such as sphere, circular cylinder, etc. With the increasing of computing speed and popularity of computer, the numerical modeling methods are use…     

黑龙江盘古-碧水韧性剪切带中段构造地球化学特征

盘古-碧水韧性剪切带中段糜棱岩的叠加强度和质量平衡分析表明:剪切带在变形过程中组分发生了显著的交换。糜棱岩类总体CaO、K₂O、SiO₂大量带入,TiO₂、MnO、FeO是带出的。随着糜棱岩化程度的提高,SiO₂、K₂O、MnO明显带入,CaO少量带出。以Al₂O₃守恒为限制条件,整个剪切带质量和体积增加了16.87%。大规模的物质带入带出发生在糜棱岩阶段。     

质量平衡法——定量恢复新生代青藏高原造山作用

青藏高原的形成演化及其对东亚地形，水文分布，季风起源，全球气候变化，海洋化学组分改变等的影响，一直是全球地质学家关注的热点，然而由于定量研究方法的缺乏，一些关键性的问题一直悬而未决，质量平衡法的提出为解决这一困境提供了新思路，阐述了质量平衡法的原理，并以Metivier等对西藏高原地区，东亚，印度支那和印度板块地区的研究为例，介绍了质量平衡法的应用，同时对存在的问题进行了较为详细的讨论，为进一步研究指明了重点。     

高分辨区域输送模式中不同输送格式的对比试验

本文对两种输送格式在理论试验的基础上，引入19层高分辨区域输送模式EM3，由中尺度模式（MM4)提供实例输送风场，积分至13、18、30、50、70小时，作分析和对比数值试验。采用的两种格式是:二阶动量矩守恒的Prather格式（以下简称为SOM)及通量订正的Smolar格式。数值试验结果表明，高精度的SOM格式使数值扩散减小一个量级， 使输送物质（SO#-[2])中心浓度比Smolar格式增大3～4倍， 采用SOM格式还明显改进了浓度中心水平平均运动轨迹的模拟精度，选择高精度的平流格式是改进模拟结果的重要途径。