Determination of nitrophenols,diaminotoluenes, and chloroaromatics in ammunition wastewater

Methods for the determination of three compound classes, i. e. diaminotoluenes, nitrophenols, and chloroaromatics in groundwater of a former ammunition plant are reported. Diaminotoluenes were extracted by discontinuous liquid/liquid-, nitrophenols by continuous liquid/liquid-extraction using dichloromethane, and chloroaromatics by solid-phase extraction. These compound classes may be analyzed by gas chromatography (GC) or gas chromatography coupled to mass spectrometry (GC/MS) without derivatization or after derivatization with N-methyl-bis(trifluoroacetamide) (MBTFA) or heptafluorobutyric anhydride (HFBA) in the case of diaminotoluenes and HFBA or acetic anhydride in the case of nitrophenols. An atomic emission detector (AED) coupled to a gas chromatograph may be employed for the analysis of chloroaromatics. High selectivity can be achieved using the characteristic wavelengths of chlorine. A variety of these compounds were identified and quantified in a groundwater sample from the former ammunition plant Elsnig (Saxony, Germany). Concentrations were in the lower ppb range. Thus, dichlorobenzenes which may have been used as substituents at the end of World War II could be identified in groundwater samples at this site.     

Anomalous induction across Europe

Summary Using real induction vector data, collected at 958 European observation sites, together with our data from the Bohemian Massif and the West Carpathians, we have generated a contour map of the transfer function TF1 (corresponding to transfer function A in Wiese's relation). Only the zero contour is retained and shown on the map. It clearly marks the main anomalous induction zones, related to internal structural inhomogeneities, across Europe.     

Research on earthquake prediction from geomagnetic pulsation

Ｒｅｓｅａｒｃｈｏｎｅａｒｔｈｑｕａｋｅｐｒｅｄｉｃｔｉｏｎｆｒｏｍｇｅｏｍａｇｎｅｔｉｃｐｕｌｓａｔｉｏｎ周军成，韩克礼，王培德，鲁跃Ｊｕｎ－ＣｈｅｎｇＺＨＯＵ；Ｋｅ－ＬｉＨＡＮ；Ｐｅｉ－ＤｅＷＡＮＧａｎｄＹｕｅＬＵ（ＩｎｓｔｉｔｕｔｅｏｆＧｅｏｐ...     

Low Energy Transfer to the Moon

In 1991, the Japanese Hiten mission used a low energy transfer with a ballistic capture at the Moon which required less Vthan a standard Hohmann transfer. In this paper, we apply the dynamical systems techniques developed in our earlier work to reproduce systematically a Hiten-like mission. We approximate the Sun–Earth–Moon-spacecraft 4-body system as two 3-body systems. Using the invariant manifold structures of the Lagrange points of the 3-body systems, we are able to construct low energy transfer trajectories from the Earth which execute ballistic capture at the Moon. The techniques used in the design and construction of this trajectory may be applied in many situations.     

Unified Approach to Photon-Counting Microlaser Rangers, Transponders, and Altimeters

Unlike current manned systems, NASA's next generation SLR2000 Satellite Laser Ranging (SLR) station is fully autonomous, eye-safe, relatively compact and inexpensive, and, during daytime tracking, operates at signal-to-noise ratios several orders of magnitude below unity. Tiny, passivelyQ-switched microlasers generate ultra-short pulses with output energies on the order of 100 J at few kHz rates to achieve mm-levelranging precision to satellite altitudesof 20,000 km. Special ranging receivers, combined with Poisson statistical analysis of the received photon distribution, enable the system to rapidly and reliably identify and extract the single photon laser echoes from the solar background. The enhanced rate of return, combined with a uniform signal strength, can actually drive down both systematic and random range errors. The new SLR2000 technology has already spawned exciting new applications. Compact microlaser altimeters, capable of mapping the surface of a planet or other celestial body at multikilohertz rates, is one such application, and a high altitude, airborne version is currently being developed under NASA's Instrument Incubator Program. Interplanetary microlaser transponders would be capable of performing decimeter ranging or subnanosecond time transfer to spacecraft throughout the inner Solar System, resulting in improved knowledge of planetary motions and librations and enhanced General Relativity experiments.     

Chironomid-based paleosalinity records in southern British Columbia, Canada: a comparison of transfer functions

Chironomid remains from Big Lake, British Columbia were analysed and paleosalinities were estimated using a pre-existing transfer function and several developed using new regression methods. A two component partial-least-squares model (PLS-2) had the highest coefficient of determination (R² _(Jackknifed) = 0.75) and lowest root-mean-squared error-of-prediction (RMSEP). As compared to the pre-existing model, it was also less sensitive to the influence of rare taxa. Nevertheless, the marginally larger R² _(Jackknifed) and lower RMSEP do not clearly identify a single best model. The models were applied to Big, Mahoney and Kilpoola lakes, revealing the sensitivity of paleosalinity inferences to model selection. A synopsis of chironomid-based paleosalinities in British Columbia and their correspondence with other paleoclimatic data are presented and discussed.     

Chironomids as indicators of climate change: a 100‐lake training set from a subarctic region of northern Sweden (Lapland)

Multivariate numerical analyses (DCA, CCA) were used to study the distribution of chironomids from surface sediments of 100 lakes spanning broad ecoclimatic conditions in northern Swedish Lapland. The study sites range from boreal forest to alpine tundra and are located in a region of relatively low human impact. Of the 19 environmental variables measured, ordination by CCA identified mean July air temperature as one of the most significant variables explaining the distribution and the abundance of chironomids. Lossonignition (LOI), maximum lake depth and mean January air temperature also accounted for significant variation in chironomid assemblages. A quantitative transfer function was created to estimate mean July air temperature from sedimentary chironomid assemblages using weightedaveraging partial least squares regression (WAPLS). The coefficient of determination was relatively high (r² = 0.65) with root mean squared error of prediction (RMSEP, based on jack-knifing) of 1.13 °C and maximum bias of 2.1 °C, indicating that chironomids can provide useful quantitative estimates of past changes in mean July air temperature. The paper focuses mainly on the relationship between chironomid composition and July air temperature, but the relationship to LOI and depth are also discussed.     

Mass movements in cave sediments: investigation of a ∼40,000-year-old guano mudflow inside the entrance of the Great Cave of Niah, Sarawak, Borneo

The West Mouth of the Great Cave at Niah in Sarawak, northwest Borneo and the North Passage that leads to the West Mouth contain large deposits of guano. The main deposit, several metres thick in places, forms the sloping floor of the entire North Passage. A mass movement deposit identified in the West Mouth, having a volume of 600 m³, originated as a guano mudflow up the North Passage in the order of 40,000 years ago. This failure of the guano slope was investigated to determine whether particular conditions or events could be identified as the most likely causes. The physical, hydrological and geotechnical properties of samples of the material were determined so that the stability of the slope could be assessed. Stability analyses showed that shearing failure of the slope would require inputs of water to the slope in quantities for which no feasible explanation can be suggested. However, the properties of the guano are similar to those of loess, indicating a high susceptibility to ‘hydrocollapse’. Very shallow failure of the slope, possibly as several smaller mudflows, could therefore have occurred due to additional water in quantities that could realistically be supplied as rainwater spray, possibly with a seismic trigger. The climate must therefore have been wetter than it is at present. These findings have implications for the interpretation of sediment deposits in other relict caves.     

Advective heat transfer and fabric development in a shallow crustal intrusive granite — the case of Proterozoic Vellaturu granite,south India

Syntectonic plutons emplaced in shallow crust often contain intermediate-to low-temperature deformation microstructures but lack a high-temperature, subsolidus deformation fabric, although the relict magmatic fabric is preserved. The Proterozoic Vellaturu granite emplaced at the eastern margin of the northern Nallamalai fold belt, south India during the late phase of regional deformation has a common occurrence of intermediate-to low-temperature deformation fabric, superimposed over magmatic fabric with an internally complex pattern. But high-T subsolidus deformation microstructure and fabric are absent in this pluton. The main crystal plastic deformation and fluid enhanced reaction softening was concentrated along the margin of the granite body. Resulting granite mylonites show Y-maximum c-axis fabric in completely recrystallized quartz ribbonds, dynamic recrystallization of perthites, and myrmekite indicative of fabric development under intermediate temperature (∼ 500–400°C). The weakly-deformed interior shows myrmekite, feldspar microfracturing and limited bulging recrystallization of quartz. The abundance of prism subgrain boundaries is indicative of continuing deformation through low-temperature (∼ 300°C). The relative rates of cooling influenced by advective heat transfer and deformation of the pluton seem to control the overall subsolidus fabric development. The rapid advective heat transfer from the interior in the early stages of subsolidus cooling was followed by slow cooling through intermediate temperature window as a well-developed phyllosilicate rich mylonitic skin around the granite body slowed down conductive heat loss. Low-T crystal plastic deformation of quartz was effected at a late stage of cooling and deformation of the shallow crustal granite body emplaced within the greenschist facies Nallamlai rocks.     

Effective macroscopic transport parameters between parallel plates with constant concentration boundaries

A macroscopic transport model is developed, following the Taylor shear dispersion analysis procedure, for a 2D laminar shear flow between parallel plates possessing a constant specified concentration. This idealized geometry models flow with contaminant dissolution at pore-scale in a contaminant source zone and flow in a rock fracture with dissolving walls. We upscale a macroscopic transient transport model with effective transport coefficients of mean velocity, macroscopic dispersion, and first-order mass transfer rate. To validate the macroscopic model the mean concentration, covariance, and wall concentration gradient are compared to the results of numerical simulations of the advection–diffusion equation and the Graetz solution. Results indicate that in the presence of local-scale variations and constant concentration boundaries, the upscaled mean velocity and macrodispersion coefficient differ from those of the Taylor–Aris dispersion, and the mass transfer flux described by the first-order mass transfer model is larger than the diffusive mass flux from the constant wall. In addition, the upscaled first-order mass transfer coefficient in the macroscopic model depends only on the plate gap and diffusion coefficient. Therefore, the upscaled first-order mass transfer coefficient is independent of the mean velocity and travel distance, leading to a constant pore-scale Sherwood number of 12. By contrast, the effective Sherwood number determined by the diffusive mass flux is a function of the Peclet number for small Peclet number, and approaches a constant of 10.3 for large Peclet number.