Morphology and geometry of Valles Marineris landslides

The walls of the Valles Marineris canyons are affected by about 45 landslides. The study of these landslides provides a test of the hypothesis of processes having affected Martian wallslopes after their formation. The dynamics of Valles Marineris landslides are controversial : either the landslides are interpreted as large debris flows or as dry rock avalanches. Their morphology and their topography are basic parameters to understand their dynamics. From topographic MOLA data and remote sensing images acquired with different spatial resolutions (Viking, THEMIS, MOC), the 3D geometry of 45 landslides of Valles Marineris has been studied. The landslides have been classified in 3 geomorphologic classes from the topography of the landslide deposits: the “chaotic” landslides without well identified structures, the “structured deposit without debris aprons” landslides with tectonic structures and small roughness at the deposit front and the “structured deposit with debris aprons” which display circular normal faults at the back of the deposit and several debris aprons at the front of the landslide. The spatial distribution of the three morphological types is in relation with the confinement of the canyons. The initial volume and the total deposited volume were also measured to compute volume balances. The deposited volumes range from 50 to . All volume balances display a maximum deficit ranging from 5% to 70%. The landslides with the largest deficits take place within an enclosed-canyon (Hebes Chasma). Lacking material exportation, these deficits could be interpreted as reflecting the porosity of the landslide source. This fact is in agreement with the hypothesis of a karstic origin of these enclosed-canyons. The Valles Marineris landslides have large mobilities (length/vertical drop) ranging from 1.8 to 12 implying low coefficients of friction and so fluidization mechanisms. The possible filling up of the porosity by volatile could be compatible with the fluidization patterns of Valles Marineris landslides.     

Numerical simulations of a Mars geodesy network experiment: Effect of orbiter angular momentum desaturation on Mars' rotation estimation

The scientific objectives of a geodetic experiment based on a network of landers, such as NEIGE (NEtlander Ionosphere and Geodesy Experiment) are to improve the current knowledge of Mars' interior and atmosphere dynamics. Such a network science experiment allows monitoring the motions of the Martian rotation axis with a precision of a few centimeters (or milli-arc-seconds (mas)) over annual and sub-annual periods. Thereto, besides radio tracking of a Mars orbiter from the Earth, radio Doppler shifts between this orbiter and several landers at the planet's surface will be performed. From the analysis of these radio Doppler data, it is possible to reconstruct the orbiter motion and Mars' orientation in space. The errors on the orbit determination (position and velocity of the orbiter) have an impact on the geodetic parameters determination from the Doppler shifts and must be removed from the signal in order to achieve a high enough accuracy. In this paper, we perform numerical simulations of the two Doppler signals involved in such an experiment to estimate the impact of the spacecraft angular momentum desaturations on the determination of Mars' orientation variations. The attitude control of the orbiter needs such desaturation maneuvers regularly repeated. They produce velocity variations that must be taken into account when determining the orbit. For our simulations, we use a priori models of the Martian rotation and introduce the spacecraft velocity variations induced by each desaturation event. By a least-squares adjustment of the simulated Doppler signals, we then estimate the orbiter velocity variations and the parameters of the Mars' rotation model. We show that these velocity variations are ill resolved when the spacecraft is not tracked, therefore requiring a near-continuous tracking from the Earth to accurately determine the orbit. In such conditions we show that only 15- of lander-orbiter tracking per week allows recovering Mars' orientation parameters with a precision of a few mas over a period of 1 Martian year.     

Revealing Mars’ deep interior: Future geodesy missions using radio links between landers, orbiters, and the Earth

In the frame of a comparison between Earth, Venus, and Mars, a vision on future geodesy missions to Mars is discussed with particular focus on furthering our understanding of the interior, rotation, and orientation of this terrestrial planet. We explain how radioscience instruments can be used to observe the rotation and orientation and therewith to study the deep interior of Mars and its global atmosphere dynamics. Transponders in X-band and Ka-band are proposed with radio links between a lander or a rover and an orbiter around Mars and/or directly to the Earth. The radio budget links are studied in the frame of possible mission constraints and simulations are performed, which show that important information on the interior of Mars can be obtained from the radioscience data. From the observation of Mars’ orientation in space and of tidal effects on a spacecraft orbiting around Mars we show that it is possible for instance to constrain the dimension and composition of the core, the percentage of light element within the core, and to determine the presence of a pressure-induced mineral-phase transition at the bottom of the mantle.     

The evolution of exposed ice in a fresh mid-latitude crater on Mars

Recent observations of the surface of Mars have shown several fresh mid-latitude craters. Some of these craters show exposed ice (Byrne, S. et al. [2009]. Science 325, 1674-1676.). In some craters, albedo of ice slowly decreases, while in others, it remains nearly constant. We attempt to determine influence of the regolith structure on the rate of sublimation of ice. For this purpose we performed numerical simulations describing evolution of the exposed ice in model craters located at middle latitudes.We consider a new model for the structure and evolution of the material at- and beneath the crater floors. In contrast to the previous study by Dundas and Byrne (Dundas, C.M., Byrne, S. [2010]. Icarus 206, 716-728.) we do not investigate sublimation of dirty ice, and the related formation of a sublimation lag. Instead, we consider sublimation of a pure ice layer on top of layered regolith. In our model the observed reflectivity decreases due to the sublimation-driven changes of the optical properties of thinning clean ice. This offers an alternative to the deposition of the dust embedded in ice (sublimation lag).We have shown that in our model among many parameters affecting ice sublimation rate, volumetric fraction of water ice in the subsurface beneath the crater has the strongest influence. Hence observed darkening of the ice patch on the crater floor might be sufficient to determine the content of water ice in the subsurface. Our calculations show that an albedo decrease of fresh ice patches in mid-latitude craters can be explained by either strong dust sedimentation or, if this is excluded, by sublimation of a thin layer of water ice from the regolith with large thermal inertia. This is consistent with a large volumetric fraction of water ice beneath the crater floor and contributes to evidence for an extended subsurface water reservoir on Mars.The overall conclusion of our work is that a thin post-impact surface ice coating over ice-rich ground beneath the crater floors is consistent with the observations.     

Estimates of gravity wave drag on Mars: Indication of a possible lower thermospheric wind reversal

Spectral gravity wave parameterization suitable for planetary thermospheres applied to wind and temperature from Mars Climate Database reveals enormously strong drag incompatible with the wind distribution. It points out to a possible wind reversal in the 110-140 km layer similar to the one in the Earth’s lower thermosphere.     

Magnitude of global contraction on Mars from analysis of surface faults: Implications for martian thermal history

Faults provide a record of a planet’s crustal stress state and interior dynamics, including volumetric changes related to long-term cooling. Previous work has suggested that Mars experienced a pulse of large-scale global contraction during Hesperian time. Here we evaluate the evidence for martian global contraction using a recent compilation of thrust faults. Fault-related strains were calculated for wrinkle ridges and lobate scarps to provide lower and upper bounds, respectively, on the magnitude of global contraction from contractional structures observed on the surface of Mars. During the hypothesized pulse of global contraction, contractional strain of −0.007% to −0.13% is indicated by the structures, corresponding to decreases in planetary radius of 112 m to 2.24 km, respectively. By contrast, consideration of all recognized thrust faults regardless of age produces a globally averaged contractional strain of −0.011% to −0.22%, corresponding to a radius decrease of 188 m to 3.77 km since the Early Noachian. The amount of global contraction predicted by thermal models is larger than what is recorded by the faults at the surface, paralleling similar studies for Mercury and the Moon, which suggests that observations of fault populations at the surface may provide tighter bounds on planetary thermal evolution than models alone.     

Thermal analysis of fractures at Cerberus Fossae, Mars: Detection of air convection in the porous debris apron

This study investigates the cause of high nighttime temperatures within Cerberus Fossae, a system of fractures affecting the Central Elysium Planitia. The inner parts (walls and floor) of the fractures are up to 40 K warmer than the surrounding plains. However, several temperature profiles exhibit a local temperature minima occurring in the central part of the fractures. We examined first the influence of cooling efficiency at night in the case of a strong reduction of the sky proportion induced by the fracture’s geometry. However, the lack of correlation between temperature and sky proportion, calculated from extracted Mars Orbiter Laser Altimeter (MOLA) profiles argues against this hypothesis. Albedo variations were considered but appear to be limited within the fractures, and are generally not correlated with the temperatures. Variations of the thermal properties of bedrocks exposures, debris aprons and sand dunes inferred from high-resolution images do not either correlate with temperature variations within the fractures. As none of these factors taken alone, or combined, can satisfactorily explain the temperature variations within and near the fracture, we suggest that geothermal heat transported by air convection within the porous debris aprons may contribute to explain high temperatures at night and the local minima on the fracture floor. The conditions for the occurrence of the suggested phenomenon and the consequences on the surface temperature are numerically explored. A conservative geothermal gradient of 20 mW/m² was used in the simulations, this value being consistent with either inferred lithosphere elastic thicknesses below the shield volcanoes of the Tharsis dome or values predicted from numerical simulations of the thermal evolution of Mars. The model results indicate that temperature differences of 10-20 K between the central and upper parts of the fracture are explained in the case of high Darcy velocities which require high permeability values (5 × 10⁻⁶ m²). The presence of coarse material composing the debris aprons may explain why this key criteria was met in the context of Cerberus Fossae.     

Crustal recycling, mantle dehydration, and the thermal evolution of Mars

We have reinvestigated the coupled thermal and crustal evolution of Mars taking new laboratory data concerning the flow behavior of iron-rich olivine into account. The low mantle viscosities associated with the relatively higher iron content of the martian mantle as well as the observed high concentrations of heat producing elements in a crust with a reduced thermal conductivity were found to promote phases of crustal recycling in many models. As crustal recycling is incompatible with an early separation of geochemical reservoirs, models were required to show no episodes of crustal recycling. Furthermore, admissible models were required to reproduce the martian crust formation history, to allow for the formation of partial melt under present day mantle conditions and to reproduce the measured concentrations of potassium and thorium on the martian surface. Taking dehydration stiffening of the mantle viscosity by the extraction of water from the mantle into account, we found that admissible models have low initial upper mantle temperatures around 1650 K, preferably a primordial crustal thickness of 30 km, and an initially wet mantle rheology. The crust formation process on Mars would then be driven by the extraction of a primordial crust after core formation, cooling the mantle to temperatures close to the peridotite solidus. According to this scenario, the second stage of global crust formation took place over a more extended period of time, waning at around 3500 Myr b.p., and was driven by heat produced by the decay of radioactive elements. Present-day volcanism would then be driven by mantle plumes originating at the core-mantle boundary under regions of locally thickened, thermally insulating crust. Water extraction from the mantle was found to be relatively efficient and close to 40% of the total inventory was lost from the mantle in most models. Assuming an initial mantle water content of 100 ppm and that 10% of the extracted water is supplied to the surface, this amount is equivalent to a 14 m thick global surface layer, suggesting that volcanic outgassing of H₂O could have significantly influenced the early martian climate and increased the planet’s habitability.     

Could giant impacts cripple core dynamos of small terrestrial planets?

Large impacts not only create giant basins on terrestrial planets but also heat their interior by shock waves. We investigate the impacts that have created the largest basins existing on the planets: Utopia on Mars, Caloris on Mercury, Aitken on Moon, all formed at ∼4 Ga. We determine the impact-induced temperature increases in the interior of a planet using the “foundering” shock heating model of Watters et al. (Watters, W.A., Zuber, M.T., Hager, B.H. [2009]. J. Geophys. Res. 114, E02001. doi:10.1029/2007JE002964). The post-impact thermal evolution of the planet is investigated using 2D axi-symmetric convection in a spherical shell of temperature-dependent viscosity and thermal conductivity, and pressure-dependent thermal expansion. The impact heating creates a superheated giant plume in the upper mantle which ascends rapidly and develops a strong convection in the mantle of the sub-impact hemisphere. The upwelling of the plume rapidly sweeps up the impact-heated base of the mantle away from the core-mantle boundary and replaces it with the colder surrounding material, thus reducing the effects of the impact-heated base of the mantle on the heat flux out of core. However, direct shock heating of the core stratifies the core, suppresses the pre-existing thermal convection, and cripples a pre-existing thermally-driven core dynamo. It takes about 17, 4, and 5 Myr for the stratified cores of Mars, Mercury, and Moon to exhaust impact heat and resume global convection, possibly regenerating core dynamos.     

Sulfates and iron oxides in Ophir Chasma, Mars, based on OMEGA and CRISM observations

We investigate the sulfate and iron oxide deposits in Ophir Chasma, Mars, based on short-wave infrared data from the Compact Reconnaissance Imaging Spectrometer for Mars - CRISM and from the Observatoire pour la Minéralogie, l’Eau, les Glaces et l’Activité - OMEGA. Sulfates are detected mainly in two locations. In the valley between Ophir Mensa and the southern wall of Ophir Chasma, kieserite is found both within the slope of Ophir Mensa, and superposed on the basaltic wall of the chasm. Here, kieserite is unconformably overlain by polyhydrated sulfate deposits and iron oxides. Locally, jarosite and unidentified phases with absorptions at 2.21 μm or 2.23 μm are detected, which could be mixtures of jarosite and amorphous silica or other poorly crystalline phases.The second large sulfate-rich outcrop is found on the floor of the central valley. Although the same minerals are found here, polyhydrated sulfates, kieserite, iron oxides, and locally a possibly jarosite-bearing phase, this deposit is very distinct. It is not layered, almost horizontal, and located at a much lower elevation of below −4250 m. Kieserite superposes polyhydrated sulfate-rich deposits, and iron oxides form lags.The facies of sulfate formation remains unclear, and could be different for the two locations. A formation in a lake, playa or under a glacier is consistent with the mineralogy of the central valley and its flat, low-lying topography. This is not conceivable for the kieserite deposits observed south of Ophir Mensa. These deposits are observed over several thousands of meters of elevation, which would require a standing body of water several thousands of meters deep. This would have lead to much more pervasive sulfate deposits than observed. These deposits are therefore more consistent with evaporation of groundwater infiltrating into previously sulfate-free light-toned deposits. The overlying polyhydrated sulfates and other mineral phases are observed in outcrops on ridges along the slopes of the southern chasm wall, which are too exposed to be reached by groundwater. Here, a water supply from the atmosphere by rain, snow, fog or frost is more conceivable.