Comparative study on CO_2 emissions from different types of alpine meadows during grass exuberance period

1IntroductionTherisingatmosphericgreenhousegaseswerebelievedtobetheprimarycauseofglobalclimatechange(Tettetal.,1999;Crowley,2000).Amongthegreenhousegases,theconcentrationofatmosphericcarbondioxidehasincreasedfrom280ppmsincepre-industrialtimestocurrent355ppm,whichaccountedfor50%ofthetotalgreenhouseeffect(Nefteletal.,1985;Friedlietal.,1986;Rodhe,1990;Fanetal.,1998).ElevatedCO2hasamarkedeffectonterrestrialecosystemprocesses(Melilloetal.,1996).TheQinghai-TibetPlateau,thelargestgeomorphologica…     

基于J2EE的分布式WebGIS研究

在对比分析传统的WebGIS各种实现模式优缺点的基础上，探讨了利用企业级J2EE技术实现分布式WebGIS的解决方案，使WebGIS更好地满足企业级应用的需要。     

基于二维直接线性变换的数字相机畸变模型的建立

提出并论证了基于二维直接线性变换的畸变的校正方法。本方法特别适用于各类固态摄像机(CCD、CID、PSD)的畸变模型的建立，以补偿各类像点系统误差。     

小波分析方法在提取井水位潮汐因子震前变化特征的初步应用

运用小波分析方法对1990年常熟、1995年苍山和1996年南黄海三个中强地震前江苏地区井水位固体潮的变化特征进行了研究，发现井水位M2波潮汐因子在地震前几个月几乎都出现一个幅度较大、周期为半月或一个月左右的异常信号，表明小波分析方法在处理和分析井水位潮汐资料方面可能是一种有效的方法。     

Inversions for MT data in 2D symmetrical anisotropic media

Introduction Ready and Renkin (1971) were the first to make the research on anisotropy problems in magnetotellurics (MT). The progress in the research is not evident because it is more complex and difficult than isotropic problems. Now, the one-dimensional (1D) anisotropy problems in MT have been well solved, while for the two-dimensional (2D) cases, the numerical solutions have only been obtained for some particular conditions (Ready and Renkin, 1975). As to the three-dimensional (3D) ani…     

Thermodynamic conditions of framework grain dissolution of clastic rocks and its application in Kela 2 gas field

Feldspar and clastic debris are the most important constituent framework grains of sedimentary clastic rocks and their chemical dissolution plays an essential role in the formation and evolution of the secondary pore in the reservoir rocks. On the basis of thermodynamic phase equilibrium, this study investigates the chemical equilibrium relationships between fluid and various plagioclase and K-feldspar in diagenesis of the sediments, particularly, the impact of temperature and fluid compositions (pH, activity of K+, Na+, Ca2+ and so on) on precipitation and dissolution equilibria of feldspars. Feldspar is extremely easily dissolved in the acid pore water with a low salinity when temperature decreases. The dissolution of anorthite end-member of plagioclase is related to the Ca content of the mineral and the fluid, higher Ca either in the mineral or in the fluid, easier dissolution of the feldspar. Moreover, the dissolution of albite end-member of plagioclase is related to Na of both the mineral and fluid,     

Soil respiration in tropical seasonal rain forest in Xishuangbanna, SW China

With the static opaque chamber and gas chromatography technique, from January 2003 to January 2004 soil respiration was investigated in a tropical seasonal rain forest in Xishuangbanna, SW China. In this study three treatments were applied, each with three replicates: A (bare soil), B (soil+litter), and C (soil+litter+seedling). The results showed that soil respiration varied seasonally, low from December 2003 to February 2004, and high from June to July 2004. The annual average values of CO2 efflux from soil respiration differed among the treatments at 1% level, with the rank of C (14642 mgCO2· m-2. h-1)＞B (12807 mgCO2· m-2. h-1)＞A (9532 mgCO2· m-2. h-1). Diurnal variation in soil respiration was not apparent due to little diurnal temperate change in Xishuangbanna. There was a parabola relationship between soil respiration and soil moisture at 1% level. Soil respiration rates were higher when soil moisture ranged from 35% to 45%. There was an exponential relationship between soil respiration and soil temperature (at a depth of 5cm in mineral soil) at 1% level. The calculated Q1o values in this study,ranging from 2.03 to 2.36, were very near to those of tropical soil reported. The CO2 efflux in 2003was 5.34 kgCO2· m-2. a-1 from soil plus litter plus seedling, of them 3.48 kgCO2· m-2. a-1 from soil (accounting for 62.5%), 1.19 kgCO2· m-2. a-1 from litter (22.3%) and 0.67 kgCO2·m-2. a-1 from seedling (12.5%).     

Experimental study on soil CO2 emission in the alpine grassland ecosystem on Tibetan Plateau

The Tibetan Plateau, the Roof of the World, is the highest plateau with a mean elevation of 4000 m. It is characterized by high levels of solar radiation, low air temperature and low air pressure compared to other regions around the world. The alpine grassland, a typical ecosystem in the Tibetan Plateau, is distributed across regions over the elevation of 4500 m. Few studies for carbon flux in alpine grassland on the Tibetan Plateau were conducted due to rigorous natural conditions. A study of soil respiration under alpine grassland ecosystem on the Tibetan Plateau from October 1999 to October 2001 was conducted at Pangkog County, Tibetan Plateau (31.23°N, 90.01°E, elevation 4800 m). The measurements were taken using a static closed chamber technique, usually every two weeks during the summer and at other times at monthly intervals. The obvious diurnal variation of CO2 emissions from soil with higher emission during daytime and lower emission during nighttime was discovered. Diurnal CO2 flux fluctuated from minimum at 05:00 to maximum at 14:00 in local time. Seasonal CO2 fluxes increased in summer and decreased in winter, representing a great variation of seasonal soil respiration. The mean soil CO2 fluxes in the alpine grassland ecosystem were 21.39 mgCO2 · m-2 · h-1, with an average annual amount of soil respiration of 187.46 gCO2 · m-2 · a-1. Net ecosystem productivity is also estimated, which indicated that the alpine grassland ecosystem is a carbon sink.     

石墨炉原子吸收光谱法测定土壤样品中镉

采用磷酸氢二铵作基体改进剂塞曼扣背景石墨炉原子吸收光谱法测定土壤样品中镉，方法检出限DL=0．012μg／g，精密度RSD在3．55％～7．33％，满足了土壤样品中镉测定的镉质量要求。     

Preliminary Characterisation of New Glass Reference Materials (GSA-1G, GSC-1G, GSD-1G and GSE-1G) by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry Using 193 nm, 213 nm and 266 nm Wavelengths

New glass reference materials GSA-1G, GSC-1G, GSD-1G and GSE-1G have been characterised using a prototype solid state laser ablation system capable of producing wavelengths of 193 nm, 213 nm and 266 nm. This system allowed comparison of the effects of different laser wavelengths under nearly identical ablation and ICP operating conditions. The wavelengths 213 nm and 266 nm were also used at higher energy densities to evaluate the influence of energy density on quantitative analysis. In addition, the glass reference materials were analysed using commercially available 266 nm Nd:YAG and 193 nm ArF excimer lasers. Laser ablation analysis was carried out using both single spot and scanning mode ablation. Using laser ablation ICP-MS, concentrations of fifty-eight elements were determined with external calibration to the NIST SRM 610 glass reference material. Instead of applying the more common internal standardisation procedure, the total concentration of all element oxide concentrations was normalised to 100%. Major element concentrations were compared with those determined by electron microprobe. In addition to NIST SRM 610 for external calibration, USGS BCR-2G was used as a more closely matrix-matched reference material in order to compare the effect of matrix-matched and non matrix-matched calibration on quantitative analysis. The results show that the various laser wavelengths and energy densities applied produced similar results, with the exception of scanning mode ablation at 266 nm without matrix-matched calibration where deviations up to 60% from the average were found. However, results acquired using a scanning mode with a matrix-matched calibration agreed with results obtained by spot analysis. The increased abundance of large particles produced when using a scanning ablation mode with NIST SRM 610, is responsible for elemental fractionation effects caused by incomplete vaporisation of large particles in the ICP.