大气负荷对新疆地区地壳形变和地面重力变化的影响

基于ECMWF全球大气模型和中国地面气候资料日值数据集中新疆及周边的气象站气压数据,根据弹性地壳形变理论,采用移去-恢复法,利用负荷格林函数法和球谐函数法,计算新疆及周边区域2011～2015年大气负荷变化对地壳垂直、水平形变的影响,同时采用大气导纳方法计算大气变化对地面重力的影响。结果表明,大气负荷对新疆地区垂直形变的影响达到cm级,对地面重力的影响可达10μGal;大气负荷影响具有明显的季节性。     

基于概率积分法的采动坡体稳定性预测与分析

地下采煤会引起地表沉降、变形,甚至引发山体、河堤滑坡等地质灾害。采动坡体的稳定性研究一直是采矿工程中实际关心的问题。该文首先介绍分析了概率积分法移动变形稳态、动态预测模型以及基于极限平衡理论的单滑面采动坡体稳定性预测模型,提出了使用概率积分法结合Knothe时间函数对采动坡体稳定性进行预测分析的方法,并使用C#及XML Schema语言编制了相关的计算程序。最后,结合一个工程实例对采动坡体稳定性和动态变化过程进行了预测与分析,通过实测数据验证了提出方法的可行性,得出了采动引起的坡体下沉是影响坡体稳定性的主要因素,并提出了在坡体拉伸阶段进行注浆加固的方法。     

Web服务驱动的地理信息系统研究

Web服务具有松散耦合、高度集成、基于标准规范等优点。将Web服务的这些特性应用到地理信息系统的开发中,提出了Web服务驱动的地理信息系统架构。该架构对现有的Web服务技术进行了改进,引入了服务语义化描述、动态服务组合以及主动服务等概念。最后,对Web服务驱动的地理信息系统进行了测试（以服务发现为例）,验证了系统架构的可行性和合理性。     

用曲面插值方法建立海洋局部地磁场模型

地磁场模型是地磁场的数学表达式,国内外已有多种建立地磁场模型的方法,对于局部地磁场模型来说,应用比较多的是多项式方法和曲面样条函数方法。讨论了基于曲面样条函数建立局部地磁场模型的原理和方法,并在实测数据基础上对模型的精度进行了验证。     

The determination of potential difference by the joint application of measured and synthetical gravity data: a case study in Hungary

In an elementary approach every geometrical height difference between the staff points of a levelling line should have a corresponding average g value for the determination of potential difference in the Earth’s gravity field. In practice this condition requires as many gravity data as the number of staff points if linear variation of g is assumed between them. Because of the expensive fieldwork, the necessary data should be supplied from different sources. This study proposes an alternative solution, which is proved at a test bed located in the Mecsek Mountains, Southwest Hungary, where a detailed gravity survey, as dense as the staff point density (~1 point/34 m), is available along a 4.3-km-long levelling line. In the first part of the paper the effect of point density of gravity data on the accuracy of potential difference is investigated. The average g value is simply derived from two neighbouring g measurements along the levelling line, which are incrementally decimated in the consecutive turns of processing. The results show that the error of the potential difference between the endpoints of the line exceeds 0.1 mm in terms of length unit if the sampling distance is greater than 2 km. Thereafter, a suitable method for the densification of the decimated g measurements is provided. It is based on forward gravity modelling utilising a high-resolution digital terrain model, the normal gravity and the complete Bouguer anomalies. The test shows that the error is only in the order of 10⁻³mm even if the sampling distance of g measurements is 4 km. As a component of the error sources of levelling, the ambiguity of the levelled height difference which is the Euclidean distance between the inclined equipotential surfaces is also investigated. Although its effect accumulated along the test line is almost zero, it reaches 0.15 mm in a 1-km-long intermediate section of the line.     

Non-stationary covariance function modelling in 2D least-squares collocation

Standard least-squares collocation (LSC) assumes 2D stationarity and 3D isotropy, and relies on a covariance function to account for spatial dependence in the observed data. However, the assumption that the spatial dependence is constant throughout the region of interest may sometimes be violated. Assuming a stationary covariance structure can result in over-smoothing of, e.g., the gravity field in mountains and under-smoothing in great plains. We introduce the kernel convolution method from spatial statistics for non-stationary covariance structures, and demonstrate its advantage for dealing with non-stationarity in geodetic data. We then compared stationary and non- stationary covariance functions in 2D LSC to the empirical example of gravity anomaly interpolation near the Darling Fault, Western Australia, where the field is anisotropic and non-stationary. The results with non-stationary covariance functions are better than standard LSC in terms of formal errors and cross-validation against data not used in the interpolation, demonstrating that the use of non-stationary covariance functions can improve upon standard (stationary) LSC.     

密度权稳健估计

利用观测量分布函数作为权函数的计算公式,分析了密度权法的抗差性和收敛速率,证实了用密度权法处理含粗差数据是行之有效的。     

逐点内插法建立DEM的研究

本文讨论了移动拟合法和加权平均法两种逐点内插法建立DEM的原理及算法实现,并对其中的关键技术——动态确定阈值R和权函数的确定与实现进行了详细讨论。文章在分析常规权函数的基础上提出了一种新的定权方法。最后通过大量试验数据对两种内插方法的精度以及不同权函数的精度分别进行了评定。     

基于WebGIS定制平台的开发与应用

基于柔性设计、定制及框架技术,形成应用型WebGIS定制平台的概念及框架,提炼了平台的高柔性、多粒度功能复用、充分可定制三大特点,进行了数据定制与配置、界面定制与配置、功能定制与配置等功能的研究与设计。基于WebGIS定制平台的开发与应用实践证明:该开发模式实现了多个WebGIS应用系统的敏捷开发,较好地支持了数据共享、功能复用与界面的一致性。     

住房成本与通勤成本的空间互动关系——来自北京市场的微观证据及其宏观含义

住房成本和通勤成本是城市空间结构中两个相互关联的内生变量。居民在进行居住区位 选择时, 会在这两者之间进行权衡, 从而形成住房价格、建筑密度和通勤行为在空间上的变化规 律。本文回顾了通勤成本和住房成本间的理论均衡关系, 探讨了各种现实情况是如何影响这个理 论关系的; 并利用大规模调研所采集的北京市微观个体数据, 提供了这一互动关系的一些定量证 据; 最后从两个角度探讨了这种互动关系在城市管理的公共政策方面的宏观含义: 考虑通勤成本 后的住房支付能力评价, 以及就业与居住过度分离的社会效果分析。