基于受限汉语的GIS路径重建研究

主要研究基于自然语言 (汉语 )的GIS路径重建问题 ,通过分析带有路径表述信息的汉语文本 ,建立了汉语的NLRP句法模型 ,它是由带有空间语义的动作以及作为动作对象的地理要素构成的集合。考虑到自然语言理解实现的需求 ,论文基于NLRP句法模型定义了受限汉语的NLRP文法 ,在此基础上 ,描述了路径重建算法PRA ,并探讨了算法实现中由于空间认知原因带来的不确定性问题以及其解决方案。最后 ,基于该算法进行了相关实例研究 ,从而验证了该算法的正确性     

利用SPOT和ETM+影像进行县级土地利用调查--以河北省万全县为例

本文以SPOT和ETM 影像作为主要信息源，经过对图像进行几何纠正、配准、增强和融合等一系列处理后，在ARCVIEW GIS基础上，成功完成了对河北省万全县土地资源利用情况的调查分析。同时还对应用遥感技术成功获取土地资源利用信息的方法和技术进行了探讨。     

Sequence of faulting and deformation during the 2000 eruptions of the Usu Volcano, Hokkaido, Japan—interpretation and image analyses of aerial photographs

Significant faulting and deformation of the ground surface has been rarely known during volcanic eruptions. Usu Volcano, Hokkaido, Japan, is a unique example of deformation due to felsic magma intrusion. Usu Volcano has a history of such types of eruptions as phreatic, pumice eruption (Plinian type), pyroclastic flowing and lava doming since 1663. On March 31, 2000, phreatomagmatic to phreatic eruptions took place after 23 years of dormancy in the western piedmont, followed by explosions on the western flank of Usu Volcano. They were associated with significant deformation including faulting and uplift. The eruptions and deformation were continuing up to the end of May 2000.We identified the faulting using total nine sets of aerial photographs taken from before the eruption (March 31, 2000) to more than 1 year (April 27, 2001) after the end of the activity, and traced deformation processes through image processing using aerial photographs. We found that some of the new faults and the associated phreatic eruptions were related to old faults formed during the 1977–1981 eruptive episode.The image processing has revealed that the surface deformation is coincident with the area of faulting forming small grabens and the phreatic explosion vents. However, the faulting and main explosive eruptions did not take place in the highest uplift area, but along the margin. This suggests that the faulting and explosive activities were affected by small feeder channels diverging from the main magma body which caused the highest uplift.     

Image processing of 2D resistivity data for imaging faults

A methodology to locate automatically limits or boundaries between different geological bodies in 2D electrical tomography is proposed, using a crest line extraction process in gradient images. This method is applied on several synthetic models and on field data set acquired on three experimental sites during the European project PALEOSIS where trenches were dug. The results presented in this work are valid for electrical tomographies data collected with a Wenner-alpha array and computed with an l₁ norm (blocky inversion) as optimization method. For the synthetic cases, three geometric contexts are modelled: a vertical and a dipping fault juxtaposing two different geological formations and a step-like structure. A superficial layer can cover each geological structure. In these three situations, the method locates the synthetic faults and layer boundaries, and determines fault displacement but with several limitations. The estimated fault positions correlate exactly with the synthetic ones if a conductive (or no superficial) layer overlies the studied structure. When a resistive layer with a thickness of 6 m covers the model, faults are positioned with a maximum error of 1 m. Moreover, when a resistive and/or a thick top layer is present, the resolution significantly decreases for the fault displacement estimation (error up to 150%). The tests with the synthetic models for surveys using the Wenner-alpha array indicate that the proposed methodology is best suited to vertical and horizontal contacts. Application of the methodology to real data sets shows that a lateral resistivity contrast of 1:5–1:10 leads to exact faults location. A fault contact with a resistivity contrast of 1:0.75 and overlaid by a resistive layer with a thickness of 1 m gives an error location ranging from 1 to 3 m. Moreover, no result is obtained for a contact with very low contrasts (1:0.85) overlaid by a resistive soil. The method shows poor results when vertical gradients are greater than horizontal ones. This kind of image processing technique should be systematically used for improving the objectiveness of tomography interpretation when looking for limits between geological objects.     

The lacustrine sedimentary records of coal-burning atmospheric pollution

With the acceleration of industrialization, coal- burning atmospheric pollution is getting more and more serious in many regions in China. However, there are only about ten odd years literature records about pollution in some large and mid-sized cities, where the atmosphere has perhaps been polluted for several decades, and therefore it is difficult to know the process and characteristic of pollution, and diffi-cult to evaluate its damage to environment. Lacustrine sediment, a natural record w…     

A critical evaluation of multi‐proxy dendroclimatology in northern Finland

Twentieth‐century summer (July–August) temperatures in northern Finland are reconstructed using ring widths, maximum density and stable carbon isotope ratios (δ¹³C) of Scots pine tree rings, and using combinations of these proxies. Verification is based on the coefficient of determination (r²), reduction of error (RE) and coefficient of efficiency (CE) statistics. Of the individual proxies, δ¹³C performs best, followed by maximum density. Combining δ¹³C and maximum density strengthens the climate signal but adding ring widths leads to little improvement. Blue intensity, an inexpensive alternative to X‐ray densitometry, is shown to perform similarly. Multi‐proxy reconstruction of summer temperatures from a single site produces strong correlations with gridded climate data over most of northern Fennoscandia. Since relatively few trees are required (<15) the approach could be applied to long sub‐fossil chronologies where replication may be episodically low. Copyright © 2010 John Wiley & Sons, Ltd.     

三维激光扫描技术在曲面模型重建中的应用

利用地面三维激光扫描仪对目标物体表面进行多方位、多角度的扫描,可以获取其表面大量且密集的高精度点的三维坐标信息以及反射率信息,将这些信息存储到电脑中,使用专业软件进行处理,再使用建模软件生成建筑物的三维模型。本文所研究的是使用地面三维激光扫描仪,通过高速激光测量方式,快速、全面、精确地获取建筑物表面的三维信息,经过一系列的点云数据处理及模型处理,最终完成曲面模型三维重建的过程。     

Geodynamic evolution of the Salinas de Añana diapir in the Basque-Cantabrian Basin,Western Pyrenees

The Salinas de Añana diapir is located in the Basque-Cantabrian basin part of the great evaporite basin, along with the Gulf of Mexico and the Central European basin, when the fragmentation of Pangea started. The evolution of these basins can only be achieved by understanding the control of salt in the sedimentary and tectonic evolution of these basins.Sedimentation began with clastic Buntsandstein sediments and minor Muschelkalk limestones. Subsequent Keuper evaporites are the bottom of sedimentary cover constituted by Jurassic limestones and marls, a clastic Lower Cretaceous and an alternant limestone and marl Upper Cretaceous, whose deposition has been conditioned by salt tectonics. The emplacement of salt extends from the Aptian until now, favored by the duplication of the salt thickness associated with the thrust of Sierra Cantabria, so it is an excellent example to study changes in the regime of intrusion along the time. The geodynamic evolution of the Salinas de Añana diapir was determined through the interpretation of 45 reprocessed seismic lines, along with information from three wells. Migration of the salt in this diapir, conditioned by N120E and N30E pre-Alpine basement lineations, was determined using time isopach maps of the various rock layers. Vertical evolution of the diapir was determined through the reconstruction of a north-south section at various geologic times by flattening the respective seismic horizons. A minimum of salt flow into the diapir coincides with a minimum rate of sedimentation during the Turonian. Similarly, maximum flows of salt into the diapir occurred during the Coniacian and Lower Santonian and again from the end of the Lower Miocene to the present, coinciding with maximum rates of sedimentation during these times. In the Tertiary, probably during the Oligocene, the diapir was displaced to the south by the Sierra Cantabria thrust, maintaining the contact between the evaporites of diapir and the same evaporites of the lower block. Since the Oligocene, the salts of the lower block migrated towards and into the diapir, deforming the trace of the overthrust.     

地史上巨量蒸发岩省的成因及其地质意义

全球蒸发岩从震旦纪到新近纪均有发育, 其最发育时期为震旦纪-寒武纪、二叠纪-三叠纪以及侏罗纪-白垩纪, 且具有幕式分布特点.它们在一定区域(低纬区)常大规模集中发育, 跨越不同的沉积盆地类型, 面积和厚度巨大, 时代跨度较短且连续, 笔者称之为巨量蒸发岩省.本文基于全球蒸发岩层系古板块再造、沉积岩相恢复、地层柱状对比、盆地构造分析等方法, 对巨量蒸发岩省的发育、分布、成因及其地质意义进行了探讨.巨量蒸发岩省形成、分布与地史中的造山带演化、超大陆的聚合与裂解、干旱气候带(南北纬30°之间)、海平面变化等因素有着密切联系; 其主要形成于干旱环境下相对封闭、靠海水潜流补给的台地和盆地中; 所处的构造单元主要为泛大陆板块内部狭长的裂谷带、特提斯造山带的残余洋盆、海-陆过渡带、陆表海或孤立板块的台地中心.