Dispersion measure variations and their effect on precision pulsar timing

We present an analysis of the variations seen in the dispersion measures (DMs) of 20-ms pulsars observed as part of the Parkes Pulsar Timing Array project. We carry out a statistically rigorous structure function analysis for each pulsar and show that the variations seen for most pulsars are consistent with those expected for an interstellar medium characterized by a Kolmogorov turbulence spectrum. The structure functions for PSRs J1045−4509 and J1909−3744 provide the first clear evidence for a large inner scale, possibly due to ion–neutral damping. We also show the effect of the solar wind on the DMs and show that the simple models presently implemented into pulsar timing packages cannot reliably correct for this effect. For the first time we clearly show how DM variations affect pulsar timing residuals and how they can be corrected in order to obtain the highest possible timing precision. Even with our presently limited data span, the residuals (and all parameters derived from the timing) for six of our pulsars have been significantly improved by correcting for the DM variations.     

85 Peg A: what age for a low-metallicity solar-like star?

We explore the possible evolutionary status of the primary component of the binary 85 Pegasi, listed as a target for asteroseismic observations by the MOST satellite. In spite of the assessed 'subdwarf' status, and of the accurate distance determination from the Hipparcos data, the uncertainties in the metallicity and age, coupled with the uncertainty in the theoretical models, lead to a range of predictions on the oscillation frequency spectrum. Nevertheless, the determination of the ratio between the small separation in frequency modes, and the large separation as suggested by Roxburgh, provides a very good measure of the star age, quite independent of the metallicity in the assumed uncertainty range. In this range, the constraint on the dynamical mass and the further constraint provided by the assumption that the maximum age is 14 Gyr limits the mass of 85 Peg A to the range from 0.75 to  0.82 M_⊙  . This difference of a few hundredths of a solar mass leads to well detectable differences both in the evolutionary stage (age) and in the asteroseismic properties. We show that the age determination which will be possible through the asteroseismic measurements for this star is independent either of the convection model adopted or the microscopic metal diffusion. The latter conclusion is strengthened by the fact that, although metal diffusion is still described in an approximate way, recent observations suggest that real stars suffer a smaller metal sedimentation compared with the models.     

Historical Evidence for the Birth of the Newly Discovered Pulsar PSR J1833-1034

Stimulated by the recent discovery of PSR J1833-1034 in SNR G21.5-0.9 and its age parameters presented by two groups of discovery, we demonstrate that the PSR J1833-1034 was born 2053 years ago from a supernova explosion, the BC 48 guest star observed in the Western Han (Early Han) Dynasty by ancient Chinese. Based on a detailed analysis of the Chinese ancient record of the BC 48 guest star and the new detected physical parameters of PSR J1833-1034, agreements on the visual position, age and distance between PSR J1833-1034 and the BC 48 guest star are obtained. The initial period P0 of PSR J1833-1034 is now derived from its historical and current observed data without any other extra assumption on P0 itself, except that the factor PP is a constant in its evolution until now.     

Infrared Characteristics of Associated Sources of Water Masers

We present an analysis of the infrared properties of 1417 water masers collected from the literature published by December 2004. The associated infrared sources of the water masers were identified with IRAS and MSX (Midcourse Space Experiment) catalogues. There are 1252 water masers associated with IRAS sources within 1', which include 700 interstellar and 552 stellar sources. For 382 sources, the IRAS counterpart identification and the maser classification are new. We found the colors of the interstellar maser sources are much redder than those of the stellar ones at IRAS wavelength bands; 99% of the interstellar maser sources are above black body line, while 95% of the stellar masers are below. The distribution difference of the two kinds of masers shown in the color-color diagram is due to their different optical depths and temperature distributions of dust regions. There are 743 water masers with MSX counterparts, of which 552 are interstellar masers and 191 are stellar masers. MSX colors of the associated sources of water masers are here analyzed for the first time. The color differences among the MSX bands are small and the interstellar masers are redder than the stellar masers. There is a correlation between the intensity of the stellar water maser emission and that of the 12μm and 25μm emissions, while there is no correlation between the water maser emission and the 8 μm emission. The infrared intensity increases with increasing wavelength for the interstellar masers, while it is the opposite for stellar masers. These results may provide clues for the pumping of water maser and for the properties of the two kinds of maser emission regions.     

A submillimetre survey of the kinematics of the Perseus molecular cloud – I. Data

We present submillimetre observations of the   J = 3 → 2  rotational transition of ¹²CO, ¹³CO and C¹⁸O across over 600 arcmin² of the Perseus molecular cloud, undertaken with the Heterodyne Array Receiver Programme (HARP), a new array spectrograph on the James Clerk Maxwell Telescope. The data encompass four regions of the cloud, containing the largest clusters of dust continuum condensations: NGC 1333, IC348, L1448 and L1455. A new procedure to remove striping artefacts from the raw HARP data is introduced. We compare the maps to those of the dust continuum emission mapped with the Submillimetre Common-User Bolometer Array (SCUBA; Hatchell et al.) and the positions of starless and protostellar cores (Hatchell et al.). No straightforward correlation is found between the masses of each region derived from the HARP CO and SCUBA data, underlining the care that must be exercised when comparing masses of the same object derived from different tracers. From the ¹³CO/C¹⁸O line ratio the relative abundance of the two species  ([¹³CO]/[C¹⁸O]∼ 7)  and their opacities (typically τ is 0.02–0.22 and 0.15–1.52 for the C¹⁸O and ¹³CO gas, respectively) are calculated. C¹⁸O is optically thin nearly everywhere, increasing in opacity towards star-forming cores but not beyond  τ₁₈∼ 0.9  . Assuming the ¹²CO gas is optically thick, we compute its excitation temperature, T _ex (around 8–30 K), which has little correlation with estimates of the dust temperature.     

Dynamical friction for accelerated motion in a gaseous medium

Dynamical friction arises from the interaction of a perturber and the gravitational wake it excites in the ambient medium. This interaction is usually derived assuming that the perturber has a constant velocity. In realistic situations, motion is accelerated as for instance by dynamical friction itself. Here, we study the effect of acceleration on the dynamical friction force. We characterize the density enhancement associated with a constantly accelerating perturber with rectilinear motion in an infinite homogeneous gaseous medium and show that dynamical friction is not a local force and that its amplitude may depend on the perturber's initial velocity. The force on an accelerating perturber is maximal between Mach 1 and Mach 2, where it is smaller than the corresponding uniform motion friction. In the limit where the perturber's size is much smaller than the distance needed to change the Mach number by unity through acceleration, a subsonic perturber feels a force similar to uniform motion friction only if its past history does not include supersonic episodes. Once an accelerating perturber reaches large supersonic speeds, accelerated motion friction is marginally stronger than uniform motion friction. The force on a decelerating supersonic perturber is weaker than uniform motion friction as the velocity decreases to a few times the sound speed. Dynamical friction on a decelerating subsonic perturber with an initial Mach number larger than 2 is much larger than uniform motion friction and tends to a finite value as the velocity vanishes in contrast to uniform motion friction.     

Reddening law and interstellar dust properties along Magellanic sight-lines

This study establishes that SMC, LMC and Milky Way extinction curves obey the same extinction law which depends on the 2200 Å bump size and one parameter, and generalizes the Cardelli, Clayton and Mathis (Cardelli et al., Astrophys. J. 345, 245, 1989) relationship. This suggests that extinction in all three galaxies is of the same nature. The role of linear reddening laws over all the visible/UV wavelength range, particularly important in the SMC but also present in the LMC and in the Milky Way, is also highlighted and discussed.     

ASCA observations of OAO 1657−415 and its dust-scattered X-ray halo

We report on two ASCA observations of the high-mass X-ray binary pulsar OAO 1657−415. A short observation near mid-eclipse caught the source in a low-intensity state, with a weak continuum and iron emission dominated by the 6.4-keV fluorescent line. A later, longer observation found the source in a high-intensity state and covered the uneclipsed through mid-eclipse phases. In the high-intensity state, the non-eclipse spectrum has an absorbed continuum component due to scattering by material near the pulsar and 80 per cent of the fluorescent iron emission comes from less than 19 light-second away from the pulsar. We find a dust-scattered X-ray halo whose intensity decays through the eclipse. We use this halo to estimate the distance to the source as 7.1 ± 1.3 kpc.