基于时变窄带滤波技术提取可控震源扫频信号方法研究

精密主动地震监测为我们主动探测地下介质结构, 并监视其动态变化提供了一条可能的技术途径。 由于精密控制震源释放的能量强度小, 随着传播距离的增加, 信号的快速衰减, 在离震源较远处有用的震源信号被掩盖在很强的噪声中, 这对于震相的识别与走时的拾取精度有着很大的影响。 本文设计了一种时变窄带滤波器进行更为精细的滤波, 期望进一步提高观测数据信噪比, 再结合匹配滤波方法实现主动震源信号的检测与波形变换。 另外, 由于不同震相有一定的到时差, 使用时变窄带滤波器提取一个震相波形信息时, 将压制其他震相的波形信号, 从而实现了震相分离的技术。 仿真计算与实际资料处理显示了该方法在提高观测资料质量、 震相识别分辨率及震相分离方面具有一定的有效性与优越性。 通过对广东省新丰江库区精密可控震源试验数据进行时变窄带滤波方法的处理, 在震中距为200 km左右处的台站记录中检测到主动源信号, 体现了对远台弱信号的提取能力。     

基于复曲波变换的一次波和多次波分离方法

多次波压制方法的研究一直都是地震数据处理中非常重要的一个课题.由于常用的多次波匹配方法主要针对多次波模型和实际多次波存在的振幅或相位的差异进行匹配校正,而无法直接校正多次波模型和实际多次波存在时移误差.本文构建了一种复曲波变换的算法,利用复曲波变换的时移不变性质,通过调整复曲波系数的振幅和相位实现对多次波模型振幅和时移误差的校正.为了更好地保护有效信号,在一次波和多次波分离前,引入一个非线性屏蔽滤波器,可以事先分离出大部分有效波,然后再将剩余部分数据作为输入数据,在复曲波域进行剩余一次波和多次波分离.最后通过模型试算和实际资料处理验证了本文提出的一次波和多次波分离方法的有效性.     

MATLAB软件在鹤岗地震台地震观测记录中的应用

随着数字化地震计的应用和发展,数字观测资料中不仅记录了宽频带地震信息,也包含了大量的干扰信号。在实际工作中,对地震信息的分析处理影响很大,有时还会造成地震波形记录不完整或地震信号淹没在干扰信号中,很难再进行深入的分析和应用。因此,利用MATLAB软件设计IIR数字滤波器对不同记录中的干扰波进行滤波器设计,达到消除干扰波的目的。实例表明,此方法在台站应用效果良好。     

CDSN台实时监视数字波形

成功开发的新软件,解决了新一代中国数字地震台站(NCDSN)无法实现地震波形的实时监视问题。它对于台站实时掌握地震仪器的工作状态、地震事件数据的流动情况起到了积极的作用,灵活使用滤波器则可极大地提高大震速报的工作效率。它的另一特点是可在程序的运行过程中直接修改任意参数而无需重新启动本软件,改动后的结果可立即看到,操作极为简单。     

一种基于改进的2D-Gabor纹理图像分类方法

针对多纹理图像分类的问题,本文提出了一种操作性强,通用性高的分类方法。借助人类视觉特性和纹理图像的尺寸,设计了一种快速简单的Gabor滤波参数设置方法。在多通道的滤波特征图像中应用顺序向前搜索策略选择特征,以J-M距离(Jeffreys-Matusitas distance)为判别因子进行特征空间的优化,最后通过SVM方法实现图像分类。实验表明,该方法有良好的纹理图像分类效果。较之传统的Gabor滤波图像分类方法,该方法具有参数设置简单,操作性强的特点。     

利用涌浪滤波器提高水深测量精度的实践

采用涌浪滤波器技术可以降低波浪引起的误差,通过对涌浪滤波数据的有效性分析和数据处理,对比分析了涌浪滤波器应用前后水深测量精度的变化。实际应用效果表明,水深地形测量精度可提高1倍以上;提出了使用涌浪滤波器的注意事项。     

一种UKF与PF相结合的相位解缠算法

针对干涉相位图解缠问题,该文提出一种基于掩膜图的无损卡尔曼滤波与粒子滤波相结合的相位解缠算法,并结合基于AMPM局部相位梯度估计技术快速和精确地从复干涉相位图中获取相位梯度等信息以及最大堆排序算法从高质量像元到低质量像元的路径快速地搜索最佳待解缠像元,减少在路径跟踪过程中所消耗的时间。该文算法不仅可以高效、精确地在相位解缠的同时进行干涉图滤波,降低前置预滤波器的难度与复杂度,甚至可以在解缠高信噪比干涉相位图时免去预滤波的过程,而且在一定程度上能将相位解缠误差限制在低质量像元区域,减少误差传递效应,提高相位解缠的精度,在实测数据和模拟数据实验结果中表明:比现有的传统算法如枝切法等InSAR干涉相位解缠算法有更高的精度和稳健性。     

A new CFAR ship target detection method in SAR imagery

Many ship target detection methods have been developed since it was verified that ship could be imaged with the space-based SAR systems. Most developed detection methods mostly emphasized ship detection rate but not computation time. By making use of the advantages of the K-distribution CFAR method and two-parameter CFAR method, a new CFAR ship target detection algorithm was proposed. In that new method, we use the K-distribution CFAR method to calculate a global threshold with a certain false-alarm rate. Then the threshold is applied to the whole SAR imagery to determine the possible ship target pixels, and a binary image is given as the preliminary result. Mathematical morphological filter are used to filter the binary image. After that step, we use the two-parameter CFAR method to detect the ship targets. In the step, the local sliding window only works in the possible ship target pixels of the SAR imagery. That step avoids the statistical calculation of the background pixels, so the method proposed can much improve the processing speed. In order to test the new method, two SAR imagery with different background were used, and the detection result shows that that method can work well in different background circumstances with high detection rate. Moreover, a synchronous ship detection experiment was carried out in Qingdao port in October 28, 2005 to verify the new method and one ENVISAT ASAR imagery was acquired to detect ship targets. It can be concluded from the experiment that the new method not only has high detection rate, but also is time-consuming, and is suitable for the operational ship detection system.     

Study on the detection of abnormal sounding data based on LS-SVM

A new method of detecting abnormal sounding data based on LS-SVM is presented. The theorem proves that the trend surface filter is the especial result of LS-SVM. In order to depict the relationship of trend surface filter and LS-SVM, a contrast is given. The example shows that abnormal sounding data could be detected effectively by LS-SVM when the training samples and kernel function are reasonable.     

基于距离限制的地面点提取滤波器(英文)

The extraction of points on the bare earth from point clouds acquired by airborne laser scanning is one of the most important steps for the generation of digital terrain models (DTM). This process is called “filtering”. However, most of the current filters erode the bare earth in steep sloped landscapes and at discontinuities, and they retain low vegetation. Therefore, a new filtering method for extracting ground points based on a distance limit is proposed in this paper. The angle criterion is used to assure the robustness of the algorithm. The experimental results show that the proposed filtering method can effectively derive the ground points from point clouds in complex urban areas. Supported by the Program for Changjiang Scholars and Innovative Research Team in University (No.0438), the National 863 Program of China (No. 2006AA12Z151).