峰谷平均法及其在计算浅源合成地震图中的应用

为了计算在震源和接收点深度相同或相近情况下分层半空间介质中的合成地震图,在重复平均法的基础上加以改进,提出一种有效的数值积分方法--峰谷平均法.根据被积函数的变化特点,将波峰和波谷值抽取出来组成慢收敛序列,利用重复平均法快速而准确地求出其极限值.与半解析方法相比,本文方法不仅数学处理上非常简单,而且易于数值实现.数值试验表明,本文方法是准确和高效的.     

Manifestation and measurement of the fractal characteristics of karst hydrogeological formations

A new method of estimating the fractal dimension of the percolation backbone of karst systems, which are discharged through karst springs, is presented. This method is based on the simulation of the spring by the MODKARST deterministic mathematical model. Application has been made to the Psiloritis karst formation in Crete, which feeds the periodically brackish karst spring “Almiros” in Crete. Furthermore, the estimated dimension justifies an independently determined power law that quantifies the sea intrusion into the karst system.     

Evaluation of equivalence between different methods for enumeration of fecal indicator bacteria before and after adoption of the new Bathing Water Directive and risk assessment of pollution

The quality of bathing water is of considerable public importance due to the possibility of fecal contamination. In 2009, Croatia implemented the new European Bathing Water Directive (BWD, 2006/7/EC) establishing stricter microbiological standards for new parameters with new reference methods. This study aims to evaluate the equivalence of different methods according to the old and revised BWD and to provide the possibility of data comparison. Furthermore, the directive requires the establishment of the bathing water profile (BWP) for pollution risk assessment. The estimation of consistency of pollution risk assessment with obtained microbiological results was also performed.     

The strength and fractal dimension characteristics of alum–kaolin flocs

Flocs generated by various shear forces exhibit different characteristics of size, strength and structure. These properties were investigated by employing a continuous optical monitoring and a microscope with CCD camera to directly monitor aggregation under six different shear intensities. The floc structure was characterized by the fractal dimension. The results showed that the flocculation index (FI) decreased from 1.16 at 20 rpm to 0.25 at 250 rpm and the floc size decreased from 550 μm to 150 μm, meantime, the FI value showed a good correlation with floc size. In order to determine the floc strength, two methods were used. One was the strength factor, ranging from 18.3% to 62.5%, calculated from FI curve, and the other was a theoretical value between 0.005 N/m² and 0.240 N/m², estimated by calculation. The floc strength increased with the G value in both cases. Furthermore, the fractal dimension increased with G and its value was between 1.30 and 1.63. The relation between fractal dimension and strength was also obtained.     

气象资料三维化技术中的插值问题

通过对不同源气象资料及数字地理信息资料的插值，实现了不同气象资料与地理信息资料分辨率的协调；从而将多种信息叠加到一起，实现了多源资料的二维、三维仿真显示。这对于模拟真实的大气空间结构、理解地形及植被对大气运动的影响、辨识各种天气系统及多种信息的融合等有积极意义。     

The generation and redistribution of overland flow on a massive oxic soil in a eucalypt woodland within the semi-arid tropics of North Australia

There is a dearth of knowledge on the runoff processes of eucalypt woodland communities in the semi-arid tropics of Australia. The work was undertaken on a 100 m transect of a 0·8 degree hillslope typical of the ‘smooth plainlands’ of central-north Queensland. This paper introduces a new experimental design for measuring overland flow in such areas by way of a cascade system of unbounded runoff plots which allow the inputs and outputs between troughs to be calculated. Most storms generate overland flow. Time to overland flow ranges between 1 and 18 min where rain intensities are above 10mm hr⁻¹ and when the average detention storage of 3·6 mm is exceeded. The bare soil surfaces within the scattered grass understory control the runoff generation process through the temporal variability of field saturated hydraulic conductivity. The study demonstrated that overland flow is mainly redistributed over the freely-draining oxic soil. Some areas export more overland flow than they gain from upslope (runoff), others gain more overland flow than they export (runon). Over the study period only 2 per cent of total rain is transferred out of this 100 m transect as overland flow due to the short duration of storms, the relatively high soil permeability, and the low slope angle. The remainder adds to the large soil water store or deep drainage. The variability of runoff–runon over these ‘smooth plainlands’ highlights how results from bounded plots would be misleading in such areas.     

2012 年6 月30 日新疆新源-和静MS 6. 6地震序列震源机制解

利用CAP方法反演了2012年6月30日新源-和静Ms6.6地震序列震源机制解.反演得到Ms6.6地震节面Ⅰ的参数为:走向299°,倾角68°,滑动角164°;节面Ⅱ的参数为:走向35°,倾角75°,滑动角23°;P轴方位角166°,倾角5°,T轴方位角258°,倾角26°;矩震级Mw为6.3;矩心深度为21km.此次地震序列破裂优势方向为NWW,倾角以60°～90°为主,滑动角以±180°±30°为主;P轴方位的优势取向为近NS向,T轴优势取向为近EW向.初步分析表明,主震节面Ⅰ为发震断层,是走向为NWW、近乎直立的左旋走滑断层.此次6.6级地震震源断错性质和主压应力方向以及序列P轴优势方位与震源区周围构造应力场特征基本一致.     

Nano-scale pore structure and fractal dimension of organic-rich Wufeng-Longmaxi shale from Jiaoshiba area,Sichuan Basin: Investigations using FE-SEM,gas adsorption and helium pycnometry

Much attention have been recently paid to the upper Ordovician Wufeng shale (O₃w) and lower Silurian Longmaxi shale (S₁l) in the Jiaoshiba area of Sichuan Basin, which is now the largest producing shale gas field in China. Field emission scanning electron microscopy (FE-SEM), low pressure gas (N₂ and CO₂) adsorption, helium pycnometry, X-ray diffraction and geochemical analyses were performed to investigate the pore structure and fractal dimension of the pores in O₃w-S₁l shale formation in the Jiaoshiba area. FE-SEM images show that organic matter (OM) pores are dominant in the organic-rich samples and these pores are often irregular, bubble-like, elliptical and faveolate in shape, while in organic-poor samples, limited and isolated interparticle (interP), intraparticle (intraP) and OM pores are observed. Reversed S-shaped isotherms obtained from nitrogen adsorption are type Ⅱ, and hysteresis loops indicate that the shape of micropore in the samples is slit-or plate-like. BET surface areas and total pore volume vary from 12.2 to 27.1 m²/g and from 1.8 × 10⁻² to 2.9 × 10⁻² cm³/g, with an average of 19.5 m²/g and 2.3 × 10⁻² cm³/g, respectively. Adsorption volume from both N₂ and CO₂ adsorption increases with respect to TOC contents. Porosities obtained from helium porosimetry are comparable with these from gas (CO₂ and N₂) adsorption in O₃w-S₁l shale. However, porosity determined by quantitative FE-SEM analysis is much smaller, which is mainly related to limited resolution and the small areas of investigation.Based on the Frenkel-Halsey-Hill (FHH) model of low-pressure N₂ adsorption, fractal dimensions of the pores varied from 2.737 to 2.823. Relationships between pore structure parameters and TOC content, mineral composition and fractal dimension reveal that the fractal dimension is mainly associated with micropores. Samples with higher TOC content, higher quartz content and lower clay content tend to contain more heterogeneous micropores, resulting in higher fractal dimensions and more complicated pore structure in shales. Therefore, fractal dimension is an effective parameter to reflect the complexity of pore structure and the degree of micropore development in O₃w-S₁l shale.     

山地城市的分形美学特征

分形美学以一种新观念和方法研究城市美学,通过建立简单分形模型探讨和度量城市的不规则性和复杂性,使山地城市美学研究从定性走向定量,从模糊走向科学。山地城市与平原城市比较,在地形地貌、空间形态和景观格局等方面表现出了独特的分形美学特征。