A new Lower Triassic (Induan) Jerus Limestone locality in northwest Pahang,Peninsular Malaysia: Conodont fauna,depositional and tectonic settings

Limestones exposed north of Raub, Pahang, Malaysia, and sandwiched between the Bentong‐Raub Suture Zone and the westernmost margin of the Sukhothai Arc terrane, yield a late Dienerian (late Induan) conodont fauna. The co‐occurrence of Neospathodus dieneri Sweet (morphotypes 1, 2 and 3) and Neospathodus pakistanensis Sweet represents the Neospathodus dieneri morphotype 3 sub‐zone of the Neospathodus dieneri Zone. The sampled limestones are interpreted as the northwards extension of the Jerus Limestone which crops out near Cheroh and Jerus villages, significantly extending the known outcrop of the Jerus Limestone northwards. The Jerus Limestone is interpreted as hemipelagic and formed in a foredeep or forearc setting on top of the accretionary complex formed by eastwards subduction of the Palaeo‐Tethys during the Lower to Middle Triassic.     

Isolated Archosaur teeth from the green sandstone capping the Coralline Limestone (Bagh Group) of the Narmada valley: Evidence for the presence of pre‐Late to Late Maastrichtian abelisaurids in India

Recent field prospecting in the Cretaceous sequences of the lower Narmada valley has led to the discovery of three isolated archosaur teeth from the upper part of marine Cretaceous rocks of the Bagh Group. The specimens were recovered by surface prospecting from an oyster‐bearing green sandstone bed occurring at the top of the Coralline Limestone (Coniacian) from a site near Phutibawri village, Dhar District, Madhya Pradesh, India. Of the three teeth recovered from this horizon, two are identified with abelisaurid dinosaurs and the third one with an indeterminate crocodile. The abelisaurid teeth conform to the premaxillary and maxillary tooth morphology of Majungasaurus and Indosuchus. Earlier reports of abelisaurid dinosaurs from India are from the Upper Cretaceous (Maastrichtian) Lameta Group of Jabalpur, Pisdura (Central India) and Balasinor (Western India) and Upper Cretaceous (Late Maastrichtian) Kallamedu Formation (South India). As no associated age diagnostic fossils are found, the specimens described here are considered to represent pre‐Late to Late Maastrichtian age based on the known ages of the underlying and overlying formations. The new finds, therefore, document stratigraphically the oldest occurrence of abelisaurid dinosaurs known from the Indian subcontinent.     

Albian extrusion evidences of the Triassic salt and clues of the beginning of the Eocene atlasic phase from the example of the Chitana-Ed Djebs structure (N.Tunisia): Implication in the North African Tethyan margin recorded events, comparisons

In the northern part of Tunisia, close to Testour/Slouguia, new observations and updated biostratigraphy make it possible to highlight the relation between the Triassic saliferous mass and the surrounding Mesozoic beds (T. M.). Near the (T. M.) boundary, the formations observed consist dominantly of Triassic evaporites reworked in the Early and Late Albian deep-water sedimentary deposits. Throughout the studied area, Jurassic rocks are absent. We propose to interpret the Chitana-Ed Djebs structure originally emplaced as gravitational stretch masses in a passive margin in the same way as the salt bodies of widespread salt province in the Gulf of Mexico. A reconstructed schematic position of the Chitana-Ed Djebs salt body displays a scenario of setting of the salt mass on a submarine palaeo-slope. Moreover, the starting clues of the paroxysmal event of the Late Mesozoic tectonic inversion clearly fossilized through the discordance of the Middle Eocene–Early Lutetian limestone on the Albian series.     

Simultaneous Determination of Fluorine,Chlorine, Bromine and Iodine in Six Geochemical Reference Materials Using Pyrohydrolysis,Ion Chromatography and Inductively Coupled Plasma‐Mass Spectrometry

Concentrations of halogens (fluorine, chlorine, bromine and iodine) were determined in six geochemical reference materials (BHVO‐2, GS‐N, JG‐1, JR‐1, JB‐1b, JB‐2). Halogens were first extracted from powdered samples using a pyrohydrolysis technique, then hydrolysis solutions were analysed by ion chromatography for F and Cl and inductively coupled plasma‐mass spectrometry for Br and I. The detection limits in solutions were 100 μg l^?1 for both F and Cl and 10 ng l^?1 for Br and I. Considering the extraction procedure, performed on a maximum of 500 mg of sample and producing 100 ml of pyrohydrolysis solution, detection limits in rock samples were 20 mg kg^?1 for F and Cl and 2 μg kg^?1 for Br and I. The mean analytical errors on the studied composition ranges were estimated at 10 mg kg^?1 for F and Cl, 100 μg kg^?1 for Br and 25 μg kg^?1 for I. The concentration values, based on repeated (generally > 10) sample analysis, were in good agreement generally with published values and narrowed the mean dispersion around mean values. Large dispersions are discussed in terms of samples heterogeneity and contaminations during sample preparation. Basaltic RMs were found to be more suitable for studies of halogen compositions than differentiated rock material, especially granites – the powders of which were heterogeneous in halogens at the 500 mg level.     

Watermarking of digital geospatial datasets: a review of technical,legal and copyright issues

Gathering data accounts for more than 80% of the cost of any GIS project. Fast Internet connections and digital datasets threaten the investments of data producers through data piracy. Outside the GIS community this problem has been known for a long time, and possible solutions exist for digital imagery, formatted text, 3D meshes and so on, showing possible links to typical spatial data. This is largely achieved through embedding hidden information in a dataset without producing perceptible changes in the data, a process known as watermarking. The producer can recover the embedded information on request in order to produce evidence of ownership in a court, so the overall strategy relies on a legal basis rather than technical ones. This paper analyses the state-of-the-art for watermarking protection in digital geographical datasets. Digital imagery is demonstrably a more mature area than geographical information, even with multiple commercial vendors offering watermarking protection. 2D vector and point datasets have received less attention from the research community; however, 3D meshes have been considered by the CAD community and a handful of techniques are available for that case, and they are reviewed here.     

志丹地区长9储集层物性特征研究

长9储集层属于鄂尔多斯盆地延长组湖泊发育早期,油源关系复杂,前期的沉积作用和后期的成岩作用共同塑造了储层低孔低渗的特征。储层的物性是连结岩性和含油性之间的重要环节,加大对低孔低渗储层物性的分析,有利于储层其他方面特征的研究。在对储层孔隙度和渗透率作深入分析的基础上,使用反映储层孔隙度比较灵敏的声波时差测井曲线,来研究其物性特征。通过建立米产液量和声波时差的对应关系,确定声波时差下限,再根据声波时差和储层物性之间的关系式,最终确定储层孔隙度和渗透率下限,为储层含油性特征、有利区优选等方面的研究提供依据。     

In Situ Determination of Au and Cu in Natural Pyrite by Near‐Infrared Femtosecond Laser Ablation‐Inductively Coupled Plasma‐Quadrupole Mass Spectrometry: No Evidence for Matrix Effects

Gold and copper concentrations were determined in natural pyrite by near‐infrared femtosecond LA‐ICP‐QMS, using both sulfide reference materials (pyrrhotite Po‐726 and in‐house natural chalcopyrite Cpy‐RM) and NIST SRM 610 as external calibrators. Firstly, using NIST SRM 610 as the external calibrator, we calculated the Au concentration in Po‐726 and the Cu concentration in Cpy‐RM. The calculated concentration averages for Au and Cu were similar to the values published for Po‐726 and Cpy‐RM, respectively. Secondly, we calculated Au and Cu concentrations taking NIST SRM 610 as an unknown sample and using Po‐726 and Cpy‐RM as external calibrators. Again, the average values obtained closely reflected the preferred concentrations for NIST SRM 610. Finally, we calculated Au and Cu concentrations in natural pyrite using sulfide and silicate reference materials as external calibrators. In both cases, calculated concentrations were very similar, independent of the external calibrator used. The aforementioned data, plus the fact that we obtained very small differences in relative sensitivity values (percentage differences are between 5% and 17% for ⁵⁷Fe, ⁶³Cu and ¹⁹⁷Au) on analyses of silicate and sulfide RMs, indicate that there were no matrix effects related to the differences in material composition. Thus, it is possible to determine Au and Cu in natural sulfides using NIST silicate glasses as an external calibrator.     

Glossary of Analytical and Metrological Terms from the International Vocabulary of Metrology (2008)

The Joint Committee for Guides in Metrology (JCGM) has introduced a revised third edition of the International Vocabulary of Metrology – basic and general concepts and associated terms ( VIM: 2008 ) that replaces the second edition which was published in 1993. This article includes a table containing the terms and definitions that are most relevant to geoanalysis, designed to extend awareness and to promote best practice in the use of this terminology. Comparison is made, where appropriate, with definitions from the earlier 1993 definitions, to demonstrate the way in which thinking in metrological concepts has evolved over this time period.     

An Exploration of the Interplay between the Measurement Uncertainty and the Number of Samples in Contaminated Land Investigations

In the assessment of potentially contaminated land, the number of samples and the uncertainty of the measurements (including that from sampling) are both important factors in the planning and implementation of an investigation. Both parameters also effect the interpretation of the measurements produced, and the process of making decisions based upon those measurements. However, despite their importance, previously there has been no method for assessing if an investigation is fit‐for‐purpose with respect to both of these parameters. The Whole Site Optimised Contaminated Land Investigation (WSOCLI) method has been developed to address this issue, and to allow the optimisation of an investigation with respect to both the number of samples and the measurement uncertainty, using an economic loss function. This function was developed to calculate an ‘expectation of (financial) loss’, incorporating costs of the investigation itself, subsequent land remediation, and potential consequential costs. To allow the evaluation of the WSOCLI method a computer program ‘OCLISIM’ has been developed to produce sample data from simulated contaminated land investigations. One advantage of such an approach is that as the ‘true’ contaminant concentrations are created by the program, these values are known, which is not the case in a real contaminated land investigation. This enables direct comparisons between functions of the ‘true’ concentrations and functions of the simulated measurements. A second advantage of simulation for this purpose is that the WSOCLI method can be tested on many different patterns and intensities of contamination. The WSOCLI method performed particularly well at high sampling densities producing expectations of financial loss that approximated to the true costs, which were also calculated by the program. WSOCLI was shown to produce notable trends in the relationship between the overall cost (i.e., expectation of loss) and both the number of samples and the measurement uncertainty, which are: (a) low measurement uncertainty was optimal when the decision threshold was between the mean background and the mean hot spot concentrations. (b) When the hot spot mean concentration is equal to or near the decision threshold, then mid‐range measurement uncertainties were optimal. (c) When the decision threshold exceeds the mean of the hot spot, mid‐range measurement uncertainties were optimal. The trends indicate that the uncertainty may continue to rise if the difference between hot spot mean and the decision threshold increases further. (d) In any of the above scenarios, the optimal measurement uncertainty was lower if there is a large geochemical variance (i.e., heterogeneity) within the hot spot. (e) The optimal number of samples for each scenario was indicated by the WSOCLI method, and was between 50 and 100 for the scenarios considered generally; although there was significant noise in the predictions, which needs to be addressed in future work to allow such conclusions to be clearer.