鞍山市铁矿矿山地质灾害形成条件及对策研究

矿山地质灾害较其它地质灾害相比有其独特性。在鞍山铁矿区，排土场沉降不仅与采矿引起的地下水位下降有直接的联系，还与松散细粒土层、活动断裂有关；滑坡、泥石流地质灾害与地形地貌、水源条件及构造有一定的关系，更重要的是采矿活动产生的废石废渣为其提供了大量的物源；尾矿库灾害主要表现为：洪水漫顶、尾矿砂液化破坏、尾矿坝渗漏及管涌溃堤、尾矿坝滑塌破坏等。本文简要分析了鞍山市铁矿山主要存在的地质灾害类型(排土场地面沉降、滑坡、泥石流及尾矿库地质灾害)和形成条件并提出了防治地质灾害的对策。     

Inelastic displacement ratios for evaluation of existing structures

Results of a detailed statistical study of constant relative strength inelastic displacement ratios to estimate maximum lateral inelastic displacement demands on existing structures from maximum lateral elastic displacement demands are presented. These ratios were computed for single‐degree‐of‐freedom systems with different levels of lateral strength normalized to the strength required to remain elastic when subjected to a relatively large ensemble of recorded earthquake ground motions. Three groups of soil conditions with shear wave velocities higher than 180m/s are considered. The influence of period of vibration, level of lateral yielding strength, site conditions, earthquake magnitude, distance to the source, and strain‐hardening ratio are evaluated and discussed. Mean inelastic displacement ratios and those associated with various percentiles are presented. A special emphasis is given to the dispersion of these ratios. It is concluded that distance to the source has a negligible influence on constant relative strength inelastic displacement ratios. However, for periods smaller than 1s earthquake magnitude and soil conditions have a moderate influence on these ratios. Strain hardening decreases maximum inelastic displacement at a fairly constant rate depending on the level of relative strength for periods of vibration longer than about 1.0s while it decreases maximum inelastic displacement non‐linearly as the period of vibration shortens and as the relative‐strength ratio increases for periods of vibration shorter than 1.0s. Finally, results from non‐linear regression analyses are presented that provide a simplified expression to be used to approximate mean inelastic displacement ratios during the evaluation of existing structures built on firm sites. Copyright © 2003 John Wiley & Sons, Ltd.     

On the circulation in the East Frisian Wadden Sea: numerical modeling and data analysis

 In this paper we use a combination of numerical modeling and data analysis to gain a better understanding of the major characteristics of the circulation in the East Frisian Wadden Sea. In particular, we concentrate on the asymmetry of the tidal wave and its modulation in the coastal area, which results in a complex pattern of responses to the sea-level forcing from the North Sea. The numerical simulations are based on the 3-D primitive equation General Estuarine Transport Model (GETM) with a horizontal resolution of 200 m and terrain-following vertical coordinates. The model is forced at its open boundaries with sea-level data from an operational model for the German Bight (German Hydrographic Office). The validation data for our model simulations include time series of tidal gauge data and surface currents measured at a pile in the back-barrier basin of the Island Langeoog, as well as several ADCP transects in the Accumer Ee tidal inlet. Circulation and turbulence characteristics are investigated for typical situations driven by spring and neap tides, and the analysis is focused on dominating temporal and spatial patterns. By investigating the response of five back-barrier basins with rather different morphologies to external forcing, an attempt is made to elucidate the dominating physical balances controlling the circulation in the individual sub-basins. It is demonstrated that the friction at the seabed tends to slow down the tidal signal in the shallow water. This leads to the establishment of flood dominance in the shallow sea north of the barrier islands. South of the islands, where the water volume of the channels at low tide is smaller than the tidal prism, the asymmetry of the tidal signal is shifted towards ebb dominance, a feature which is particularly pronounced at spring tide. At the northern open boundary, the tidal wave propagating from west to east generates a sea-level difference of ∼1 m along the boundary, and thereby triggers vigorous alongshore currents. The frictional control in the model is located in the inlets, as well as along the northern boundary. The correlation between velocity and turbulent kinetic energy tends to the establishment of a net southward transport, giving theoretical support to the observed accumulation of sediments on the intertidal flats. Weak turbulence along the northern shores of the barrier islands and the small magnitude of the residual currents there promote accumulation of suspended matter in these areas, although wave action will generally counteract this effect. Received: 29 May 2002 / Accepted: 26 September 2002 Responsible Editor: Jean-Marie Beckers Acknowledgements We are indebted to S. Dick for providing the data from the operational model of BSH and to B. Flemming for the useful discussions. The topography data and Fig. 1 have been prepared in cooperation with F. Meyer. Figure 2 has been prepared by G. Brink-Spalink. We also thank for the comments from an anonymous reviewer which helped to improve our paper.     

The role of sediment specific gravity and availability on cluster evolution

The objective of this experimental study was to account for the role of sediment availability and specific gravity on cluster formation and cluster geometric characteristics (spacing and size). To isolate the effects of sediment availability and specific gravity on cluster evolution, mono‐sized spheres were used to simulate the cluster evolutionary cycle. Overall, twelve experimental runs were carried out in the laboratory flume. Six of these tests were performed by using glass spheres (specific gravity, SG = 2·58) and the other six by employing an equal combination of glass and Teflon spheres (SG = 2·12) of the same diameter to evaluate the role of specific gravity on cluster evolution. The three sediment availability conditions that were investigated here simulated isolated gravel elements, pool–riffle sequences and densely packed gravel‐bed. An advanced image analysis technique was employed to track the evolution of cluster microforms and provide quantitative information about the size and shape of clusters and the number of clusters per unit area. The results of this study showed that: (1) sediment availability affects the architecture and size of cluster microforms; and (2) clusters consisting of mono‐sized sediments start disintegrating at twice the incipient conditions. By performing complementary tests for the isolated gravel elements case, it was found that the evolutionary cycle of individual clusters could be described as follows, in order of increasing stress: no cluster→two particle cluster→comet→triangle→rhomboid→break up. Copyright © 2003 John Wiley & Sons, Ltd.     

Geomechanical Properties of Shear Zones in the Eastern Aar Massif,Switzerland and their Implication on Tunnelling

Summary ¶Rock zones containing a high fracture density and/or soft, low cohesion materials can be highly problematic when encountered during tunnel excavation. For example in the eastern Aar massif of central Switzerland, experiences during the construction of the Gotthard highway tunnel showed that heavily fractured areas within shear zones were responsible for overbreaks in the form of chimneys several metres in height. To understand and estimate the impact of the shear zones on rock mass behaviour, knowledge concerning the rock mass strength and deformation characteristics is fundamental. A series of laboratory triaxial tests, performed on samples from granite- and gneiss-hosted shear zones revealed that with increasing degree of tectonic overprint, sample strength decreases and rock behaviour shows a transition from brittle to ductile deformation. These trends may be explained by increasing fracture densities, increasing foliation intensity, increasing thickness of fine-grained, low cohesion fracture infill, and increasing mica content associated with the increasing degree of tectonic overprint. As fracture density increases and the influence of discrete, persistent discontinuities on rock mass strength decreases, behaviour of the test samples becomes more and more representative of rock mass behaviour, i.e. that of a densely fractured continuum. For the purpose of numerical modeling calculations, the shear zones may be subdivided with respect to an increasing fracture density, foliation intensity and mica content into a strongly foliated zone, a fractured zone and a cohesionless zone, which in turn exhibit brittle, brittle-ductile and ductile rock mass constitutive behaviour, respectively.Received December 17, 2001; accepted January 9, 2003 Published online April 29, 2003     

封丘县夏蝗发生与气候条件的关系

利用1980～200l午封丘县夏蝗发生资料和同期该地区气候资料，采用合成分析法，分析了气候条件对夏蝗发生的影响，并找出了一些预测夏蝗发生的定性预报因子。     

陆面过程模式的改进及其检验

文中对陆面过程模式 (BATS)进行了改进 ,改进后的模式能较好地模拟地表物理量的年、季和日变化 ,它有两方面的特点 :采用热扩散方程模拟 7层土壤温度 ,模拟的温度可与实测值进行比较 ;在BATS的地表径流方案中 ,考虑了空间不均匀性的一般地表径流 (GVIC)过程 ,研究结果表明 :⑴模式能很好地模拟各层土壤温度的年、季和日变化。冬季土壤温度下层高于上层 ,而在夏季上层高于下层 ,这种上下层温度的转换时间大约在 4和 10月份 ,这与实测土壤温度的年变化非常一致。较为准确地模拟了各层土壤温度日变化的时滞效应。⑵用南京和武汉站的资料 ,将BATS地表径流方案模拟的地表水分分量与GVIC方案进行比较 ,BATS地表径流方案模拟的地表水分分量 ,与总水量的平衡相差较大 ,而GVIC模拟的效果相对较好 ,地表总水量基本上与降水总量达到了平衡     

对波达波夫和Pride震电波方程组的对比分析

用Biot介质参数说明了波达波夫震电波方程组中弹性动力学 参数的含义，解释了第一类和第二类震电效应的意义，在忽略第一类震电效应条件下将该方 程组与Pride方程组进行比较，说明了二者在描述第二类震电效应方面的异同点. 同时指出 ：波达波夫方程组忽略了流体与固体的耦合质量；方程中的黏性耗散项丢掉了一个孔隙度因 子，依据该方程组计算出的弹性波和转换电场的幅度将偏大；边界条件之一存在错误，会影 响对波在界面上的反射透射规律的描述.     

ω循环型边界条件

通过利用预条件共轭梯度法对对称正定Toeplitz 矩阵系统进行分析，重点介绍了一种新的嵌入式预条件矩阵构造方法，证明了以前的预条件矩阵构造方法大都是这种方法的特例.提出了ω循环型边界条件，并将其与普通循环型及螺旋型边界条件作了分析、比较后得到了一种新的边界条件即混合型边界条件.     

小波变换在识别储层流体性质中的应用

根据小波变换的特点提出一种识别储层流体的新方法. 本文假设测井所得的信号为地层微观孔隙结构、地层流体性质及岩性和岩相等各部分的综合贡献之和，不同的储层中小波分析的能量谱特征不同，因而通过对已知储层模型进行小波能量谱分析，可得到各种储层的特征能量谱，根据这些储层特征能量谱就可以对待划分的储层段进行储层流体性质判别.