Early Identification of the Jiangdingya Landslide of Zhouqu Based on SBAS-InSAR Technology

SBAS-InSAR technology is characterized by the advantages of reducing the influence of terrain-simulation error, time-space decorrelation, atmospheric error, thereby improving the reliability of surface-deformation monitoring. This paper studies the early landslide identification method based on SBAS-InSAR technology. Selecting the Jiangdingya landslide area in Zhouqu County, Gansu Province as the research area, 84 ascending-orbit Sentinel-1A SAR images from 2015 to 2019 are collected. In addition, using SBAS-InSAR technology, the rate and time-series results of surface deformation of the landslide area in Jiangdingya during this period are extracted, and potential landslides are identified. The results show that the early landslide identification method based on SBAS-InSAR technology is highly feasible and is a better tool for identifying potential landslides in large areas.     

2020年1月19日新疆伽师MS6.4地震InSAR同震形变场特征及发震构造初步探讨

基于Sentinel-1 SAR升、降影像,利用D-InSAR技术获取新疆伽师M S6.4地震的同震形变场,结果表明,本次地震引起的同震形变场整体呈近椭圆状分布,形变区东西长约66 km,南北宽约40 km,整个形变场由南部隆升区和北部沉降区组成,南部最大隆升量约7 cm,北部最大沉降量约3 cm。本次地震发生在块体俯冲界面处的低倾角逆冲推覆构造带上,隆升和沉降两个中心均位于逆冲推覆体的上盘,形变主要以隆升形变为主,符合低倾角逆断层中强震的变形特征。在沉降区与隆升区之间干涉条纹连续分布,未出现表征地表破裂位置的空间失相关带,表明地震未引起明显的地表破裂。结合震源机制、余震精定位及区域构造特征,初步推断认为伽师地震的发震构造可能为柯坪塔格推覆构造前缘的N倾的柯坪断裂。     

Sedimentary and geochemical characterization of Middle–Late Miocene formations in the Neogene Tsugaru Basin,Japan by means of DTH27‐1 well sediment analysis

Middle–Late Miocene age siliceous formations outcropping along the northwestern side of Honshu Island are considered prospective source rocks for hydrocarbons. An analysis of geophysical, sedimentological, and geochemical properties is essential to evaluate the formations' source potential, and to understand the factors that determined the accumulation and preservation of organic matter. This study investigates the Middle–Late Miocene geological record of the Tsugaru back‐arc basin, located in the western part of Aomori prefecture, through an analysis of a 200 m long portion of a core from the DTH27‐1 well; this core is composed of the diatomaceous siltstones of the Akaishi Formation and the siliceous mudstones of the Odoji Formation. Sedimentological and geophysical characterization showed that the Akaishi Formation's diatomaceous siltstones are mostly massive and bioturbated, have low magnetic susceptibility, and demonstrate moderate natural radioactivity. Although the Odoji Formation's siliceous mudstones are massive, they have exceedingly low magnetic susceptibility and high natural radioactivity. Geochemical data from a Rock‐Eval Pyrolysis such as total organic carbon and generative potential (S1 + S2) revealed that, in the Tsugaru area, only the Odoji Formation is a likely prospective source rock for hydrocarbons. On the other hand, T_max values indicate that both the formations are thermally immature for generating hydrocarbons. The difference between the Akaishi and Odoji Formation in the sedimentological facies, in terms of the degree of bioturbation and the organic carbon content, indicates variations in lithological properties, such as porosity and grain size; moreover, this difference indicates a variation in the paleo‐oxygenation of bottom waters, with the transition from oxygen‐deficient conditions in the Middle Miocene to the more oxygenated conditions in the Late Miocene. Both the lithological and paleo‐environmental factors possibly influenced the organic richness in the two formations.     

Revisiting the morphological method in two-dimensions to quantify bed-material transport in braided rivers

Research in the 1990s showed that bed-material transport rates could be estimated at the reach scale in both one-dimension and, over small spatial scales (10s of m), in two-dimensions. The limit on the latter was the spatial scale over which it was possible to obtain distributed data on morphological change. Here, we revisit the morphological method given progress in both topographical data acquisition and hydraulic modelling. The bed-material transport needed to conserve mass is calculated in both one and two dimensions for a 1600 m × 300 m Alpine braided river “laboratory”. High-resolution topographical data were acquired by laser scanning to quantify Digital Elevation Models (DEMs), and morphological changes caused by the flushing of the water intake were derived from repeated surveys. Based on DEMs of differences, 1D bed-material transport rates were calculated using the morphological method. Then, a 2D hydraulic model was combined with a topographic correction to route sediment through the network of braided channels and to obtain a spatially variable estimate of transport in both downstream and cross-stream directions. Monte Carlo simulation was applied to the routing model parameters, allowing identification of the most probable parameter values needed to minimize negative transport. The results show that within-section spatial compensation of erosion and deposition using the 1D treatment leads to substantial local errors in transport rate estimates, to a degree related to braiding intensity. Even though the 2D application showed that a large proportion of the total transport was actually concentrated into one main channel during the studied low flow event, the proportion of transport in secondary anabranches is substantial when the river starts braiding. Investigations of the effects of DEM resolution, competent flow duration and survey frequency related to ‘travelling bedload’ and sequential erosion-deposition emphasized the critical importance of careful data collection in the application of the morphological method. © 2019 John Wiley & Sons, Ltd.     

Experiments on Exploration of Shallow Fine Structures and the Construction of the 1-D Velocity Model in the Pingtan Island, Fujian

112 short-period seismographs were set up in the 400km² area of Pingtan Island and its surrounding areas in Fujian. The combined observations of the airgun source and ambient noise source were carried out using a dense array to receive the 387 airgun signals excited around the island and one month of continuous ambient noise recording. The 1-D P-wave and S-wave shallow velocity model of Pingtan Island is obtained by the inversion of the airgun body wave''s first arrival time data, and the reliability of the velocity model is verified by using the surface wave phase velocity dispersion curve, which can provide initial model for subsequent 3-D imaging. The experimental results show that this experiment is a successful demonstration of local scale green non-destructive detection, which can provide basic data for shallow surface structure research and strong vibration simulation of the Pingtan Island.     

CTS-1E、CMG-3ESPC-120型地震计工作参数对比分析

CTS-1E型、CMG-3ESPC-120型地震计安装架设在库尔勒地震台小泉沟观测点同一台基上,均使用EDAS-24GN型数据采集器进行实时数据采集,对比分析观测数据波形特征、地动噪声功率谱及动态范围等,明确2套地震计在实际观测中的性能差异,以便为地震监测数据分析及相关研究提供参考。     

利用天宫一号和Landsat7对地观测数据的森林变化检测

由于自然演替和一些干扰因素的影响,森林覆盖处在不断的变化中.结合云南省西双版纳地区的天宫一号高光谱数据以及Landsat影像,研究了热带森林覆盖制图与变化检测的自动化识别方法.首先分析了每景影像中红光波段的光谱属性,依据直方图提取出纯净森林像元,然后计算影像中各像元与纯净森林像元之间的光谱相似性,从而得到森林指数并以此为依据提取出每景影像对应的森林覆盖图,将多期的森林覆盖专题图进行叠加分析即可得到森林变化专题图.结果表明:(1)使用天宫一号高光谱影像可以进行森林覆盖自动化提取,生成的森林覆盖图合理地反映了森林分布状况;(2)与多期遥感影像结合进行森林变化信息提取,提取结果很好地体现了森林减少和森林恢复情况,对新恢复的未郁闭森林也可以进行有效检测.     

基于GF-1影像的西藏亚东地区构造解译研究

随着地质调查工作精度的提高,中低分辨率的遥感影像已难以满足地质构造深入解译的需求。高分一号(GF-1)影像的应用为提高地质构造解译尺度提供了数据基础,特别是在人车通达性较差的地区,可大大减少野外工作量。为此,以地质构造发育的西藏亚东地区为研究区,利用GF-1影像,在分析已有地质资料基础上,构建了研究区的断裂形成机制模型,并结合地形地貌特征,对研究区的地质构造进行遥感解译。结果显示: ①研究区内解译新增断裂418条; ②受SN向应力挤压机制影响,形成于中新世晚期的EW走向断裂为主要断裂,其性质为逆冲断层,EW向应力的引张作用,形成了研究区SN向、NE向断裂,并具有多期活动特点; ③河流和湖泊受断裂控制明显,河流多成SN向,位于逆冲断层上盘的隆升造成了区内河流和湖泊的水位降低。     

地表灌溉对沉积含水层中碘迁移释放过程的影响

灌溉等人为活动会造成外源物质的输入,如硝酸盐、有机质等,从而引起浅层地下水环境发生周期性波动。为研究农业灌溉对沉积含水层中碘迁移富集过程的影响,选取代表性富碘沉积物,通过室内实验模拟了灌溉活动外源物质输入条件下,盆地地下水系统中碘迁移释放的（生物）地球化学过程。实验结果表明：厌氧条件下,外源有机质输入可促使微生物利用有机质作为电子供体,还原固相铁矿物相,进而造成搭载于铁氧化物/氢氧化物表面的碘释放,以碘离子形式在地下水中富集;而在NO₃^-输入情况下,微生物会优先利用NO₃^-为电子受体,至硝酸盐被全部消耗后,Fe（Ⅲ）可进一步被还原为Fe（Ⅱ）。研究结果表明,人为活动造成浅表环境外源物质的输入可直接影响浅层地下水中碘的迁移释放过程。伊利石黏土矿物吸附的铁氧化物矿物相可能为浅层环境中碘的主要搭载介质,微生物作用下,铁氧化物/氢氧化物的还原溶解是高碘地下水形成的主控因素。