利用SPAC法估算地壳S波速度结构

S波速度结构能够反映地球介质的物性差异,是地壳内低速区结构特征判别的重要依据.本文尝试利用空间自相关法(SPAC法)从地震台站微动信号的垂直分量中提取瑞利波相速度频散曲线,通过对频散曲线的反演获得地下介质的S波速度结构.以国家数字测震台网8个宽频带地震台站的实测微动数据为例,采用SPAC方法获得了首都圈地区北京附近约30 km 深度范围内的一维S波速度结构.结果表明,该区结晶基底埋深较浅约2 km;分别在5~8 km 和12~16 km 深处发育S波低速层;8 km 和 20 km 处是S波速度差异较大的速度分界面.这一结果与以往地震学及人工地震探测结果较为吻合,表明SPAC法估算地壳S波速度结构是可行、有效的.     

Application of passive source surface-wave method in site engineering seismic survey

Site engineering seismic survey provides basic data for seismic effect analysis. As an important parameter of soil, shear-wave velocity is usually obtained through wave velocity testing in borehole. In this paper, the passive source surface-wave method is introduced into the site engineering seismic survey and practically applied in an engineering site of Shijingshan District. By recording the ubiquitous weak vibration on the earth surface, extract the dispersion curve from the surface-wave components using the SPAC method and obtain the shear-wave velocity structure from inversion. Over the depth of 42 m underground, it totally consists of five layers with interface depth of 3.31, 4.50, 7.23, 17.41, and 42.00 m; and shear-wave velocity of 144.0, 198.3, 339.4, 744.2, and 903.7 m/s, respectively. The inversion result is used to evaluate site classification, determine the maximum shear modulus of soil, provide basis for further seismic hazard analysis and site assessment or site zoning, etc. The result shows that the passive source surface-wave method is feasible in the site engineering seismic survey and can replace boreholes, shorten survey period, and reduce engineering cost to some extent.     

求解半无限长多孔介质柱体水动力弥散系数的一种最小二乘法

针对半无限长多孔介质柱体,一端为定浓度边界的水动力弥散反求参数问题,先用数值方法求解补余误差函数erfc（x）的反函数,再根据该问题的解析解,通过变量代换,构造一个基于解析解的最小二乘模型来反求水动力弥散系数。最后将该方法应用于一个实例,计算结果表明该方法比erfc（x）近似公式法、配线法、正态分布函数法等传统方法要好。     

Spatial behaviour of Rayleigh waves in layered half‐spaces under active surface sources

In the free state, Rayleigh waves are assumed to travel in the form of planar wavefronts. Under such an assumption, the propagation behaviour of the modes of Rayleigh waves in layered half‐spaces is only frequency dependent. The frequency behaviour, which is often termed as dispersion, is determined by the shear wave velocity profile of layered soils within the depth related to wavelength (or frequency). According to this characteristic, the shear wave velocity profile can be back‐analysed from the dispersion. The technique is widely used in the surface wave testing. However, the wavefronts of Rayleigh waves activated by the surface sources are non‐planar. The geometric discrepancy could result in Rayleigh waves manifesting distance‐dependent behaviour, which is referred to as spatial behaviour in this paper. Conventional analysis ignoring this spatial behaviour could introduce unexpected errors. In order to take the effects of sources on the propagation behaviour into account, a new mathematical model is established for Rayleigh waves in layered elastic media under vertical disc‐like surface sources using the thin‐layer method. The spatial behaviour of the activated modes and the apparent phase velocity, which is the propagation velocity of Rayleigh waves superposed by the multiple modes, are then analysed. Aspects of the spatial behaviour investigated in this paper include the equilibrium path, the particle orbit, and the geometric attenuation of the activated Rayleigh waves. The results presented in this paper can provide some guidelines for developing new inverse mathematical models and algorithms.     

混合ADI-FDTD亚网格技术在探地雷达频散媒质中的高效正演

提出混合ADI-FDTD亚网格技术开展频散介质GPR正演,即在物性参数变化剧烈局部区域采用细网格剖分ADI-FDTD计算,其他的区域采用粗网格剖分常规FDTD计算,ADI-FDTD突破了CFL条件的限制,可选取与粗网格一致的大时间步长,有效地提高了计算效率.本文首先基于Debye方程,推导了粗网格FDTD及细网格ADI-FDTD频散介质差分格式,着重对粗细两种网格结合的场值交换方式进行了深入探讨,给出了该算法的计算流程.然后以一个薄层模型为例,分别应用粗网格、细网格、混合ADI-FDTD亚网格算法对该模型进行正演,计算资源的占用及模拟精度说明了混合ADI-FDTD亚网格算法的优势.最后,建立频散介质与非频散介质的组合模型,应用3种方法对该模型进行正演,对比3种方法优劣,分析雷达剖面中非频散介质及频散介质中波形特征,有效地指导雷达资料的精确解释.     

An Experimental Evidence Of Non-Ducted Propagation During Daytime From The Esd Whistler Observations At Low Latitude Ground Station Jammu

The propagationmechanism of low latitude daytime whistlers is investigated on the basis of ground measurements made continuously during daytime in North India at Jammu (geomag. lat. 22°26°N;L = 1.17). On February 14, 1998 extremely small dispersion (ESD) whistlers with dispersion varying from 5–10 sec^1/2 in surprisingly large numbers were recorded at Jammu during daytime in the late afternoon. The results of a study of the characteristics of ESD whistlers are presented and the discussion indicates that ESD whistlers recorded are the VLF waves radiated from the return stroke of the lightning discharge launched at the ionosphere with different initial wave normal angles, propagated upwards under eitherquasi-longitudinal conditions or pro-longitudinal whistler mode, turned around at different heights due to quasi-transverse propagation and received at Jammu with the dispersion of the order of 5–10 sec^1/2. The validity of this suggestion has been tested by performing actualray-tracing computations in thepresence of equatorial anomaly model. This revised version was published online in July 2006 with corrections to the Cover Date.     

广东省东部地区的S波速度结构

利用广东省数字遥测台网记录到的2000年11月16日发生在所罗门群岛的两次Ms7．7和Ms7．8地震及2000年11月18日新爱尔兰地区的Ms7．3地震面波波形数据，测定了在广东地区汕头和韶关之间路径上的相速度频散曲线并反演得到了对应的地壳横波速度结构。结果表明该地区的地壳厚度为30km，上地壳横波速度变化较大，中下地壳相对均匀，没有发现地壳内部的低速层。     

非单一电离层扰动场的台阵探测分析

真实的ＴＩＤ一类大尺度电离层扰动是非平稳和色散的，而且是统计非单一的．本文首先给出了描述这种真实扰动场的数学模型，进而导出了联系台阵探测可测量与扰动场传播参量的观测方程，在此基础上提出了求解观测方程的时频分析方法．这一台阵探测数据分析的新方法，既能分离出非单一电离层扰动场中各种准单一扰动成分，又能获得准单一扰动成分传播参量随时间的演变和随频率的色散．分析实例表明，本文方法分辨率好，精度高，结果可靠，是适用于ＴＩＤ一类大尺度电离层扰动台阵探测数据分析的有效方法．     

地震波频散效应与反Q滤波相位补偿

本文以Futterman提出的地震波振幅衰减和相速度频散表达式为基础,从井震匹配的角度出发,推导了不进行反Q滤波、仅反Q滤波振幅补偿、仅反Q滤波相位补偿,以及反Q滤波相位与振幅同时补偿四种情况下,地震波速度频散与相速度及地震记录振幅谱间的表达式,并从理论上说明了反Q滤波相位补偿的必要性.通过相同观测系统,炸药震源和可控震源分别激发采集的零偏移距VSP资料实例,验证了本文所推导的速度频散表达式的合理性;通过井震标定实例,进一步说明了反Q滤波相位补偿,可有效消除地震子波速度频散,提升地面地震资料与零偏移距VSP走廊叠加剖面的匹配度,最终提高地震资料成果的可信度.     

Approaches for modeling longitudinal dispersion in pore-networks

The purpose of this study is to quantify the dispersivity in the longitudinal direction by upscaling pore scale mixing over a network domain and to verify the dispersivity with that obtained through the more rigorous upscaling technique, the Brownian particle tracking model (BPTM). We model a porous medium with a network of pore-units that are comprised of pore bodies and bonds of finite volume. Such a pore-unit is assumed to be a mixing cell with the steady state flow condition for a single fluid. Dispersivity can be obtained by solving the mixing cell model (MCM) for the concentration in each pore-unit and by averaging the concentrations for a large number of pore units (as a function of time and space). A minimal size of network that ascertains an asymptotic value of dispersivity was determined and verified with large size pore networks. This numerically computed dispersivity is compared with the results from the BPTM for the same porous medium and flow conditions. We show that the dispersivity obtained from the MCM is equally reliable for the heterogeneous pore-networks and can be estimated as a function of pore size heterogeneity. For homogeneous networks with the MCM, the iteration time step plays an important role. On the other hand, for networks with the BPTM, the assumption of intra-bond velocity profile affects the results.