基于AutoCAD二次开发的矢量地形数据检查

基于CAD的矢量地形数据是一类基本的重要的基础地理数据，其应用十分广泛，同时也是各类地理信息系统重要的数据源，其属性精度、逻辑一致性是其重要质量元素，本文论述了基于AuotoCAD二次开发实现矢量地形数据计算机自动化高效检查的技术方法。     

评价储层含油性的热解参数校正方法及其应用

评价储层含油性时，热解参数Ｓ１＋Ｓ２是一项有效参数。其中Ｓ２相对稳定，Ｓ１则随样品类别或露置时间的不同而发生变化。岩心样品的随钻解分析值比较接近真实，岩屑和井壁取心样品的Ｓ１会明显损失。而目前多数探井心进尺少，大多为岩屑录井。     

Using an inerter‐based device for structural vibration suppression

This paper proposes the use of a novel type of passive vibration control system to reduce vibrations in civil engineering structures subject to base excitation. The new system is based on the inerter, a device that was initially developed for high‐performance suspensions in Formula 1 racing cars. The principal advantage of the inerter is that a high level of vibration isolation can be achieved with low amounts of added mass. This feature makes it an attractive potential alternative to traditional tuned mass dampers (TMDs). In this paper, the inerter system is modelled inside a multi‐storey building and is located on braces between adjacent storeys. Numerical results show that an excellent level of vibration reduction is achieved, potentially offering improvement over TMDs. The inerter‐based system is compared to a TMD system by using a range of base excitation inputs, including an earthquake signal, to demonstrate how the performance could potentially be improved by using an inerter instead of a TMD. Copyright © 2013 John Wiley & Sons, Ltd.     

Interactions between sediment chemistry and frenulate pogonophores (Annelida) in the north-east Atlantic

The small frenulate pogonophores (Annelida: Pogonophora a.k.a. Siboglinidae) typically inhabit muddy sediments on the continental slope, although a few species occur near hydrothermal vents and cold seeps. We present data on the distribution and habitat characteristics of several species on the European continental shelf and slope from 48°N to 75°N and show how the animals interact with the chemistry of the sediments. The environments inhabited include: shallow (30 m), organic-rich, fjord sediments; slope sediments (1000–2200 m) and methane seeps at 330 m depth. All the species studied obtain nutrition from endosymbiotic bacteria. They take up reduced sulphur species, or in one case, methane, through the posterior parts of their tubes buried in the anoxic sediment. We conclude that most species undertake sulphide ‘mining’, a mechanism previously demonstrated in the bivalves Lucinoma borealis and Thyasira sarsi. These pogonophores participate in the sulphur cycle and effectively lower the sulphide content of the sediments. Our results show that the abundance of frenulate pogonophores increases with increasing sedimentation and with decreasing abundance of other benthos, particularly bioturbating organisms. The maximum sustainable carrying capacity of non-seep sediments for frenulate pogonophores is limited by the rate of sulphate reduction.     

Discrimination of spurious self-correlation in nondimensionalized analyses of fluid dynamical data

Nondimensionalization of variables enables us to treat experiment data much more simply and efficiently by decreasing the number of variables. In some cases, trivial conclusions (which Kenney, 1982, called spurious self-correlation) result from a formal application of dimensional analyses. In contrast, in some cases fully significant conclusions can be derived. We first discuss how to construct nondimensional variables retaining the physical meanings of variables. We then propose simple and efficient methods, especially the use of “spurious triangle (SpT)”, to discriminate between significant conclusions and spurious self-correlations in the analysis of nondimensionalized variables.     

Deterministic non-linear wave prediction using probe data

The accurate prediction of non-linear sea states represents a great challenge, with a number of applications in oceanography, marine engineering, security of people and marine transportation, etc. In this paper, we report on the development of two efficient deterministic prediction models for 2D irregular wave-fields. These models are based on the exploitation of wave elevation time series given by one or more probes and on the use of two different numerical models for the wave-fields simulation. Two effective data assimilation processes are developed to improve the wave-field estimates obtained from the study of one or several probe signals, so that we obtain proper initial conditions for the forecast. The assimilation schemes have been validated on the reconstruction of model-generated observations and accurate predictions of the corresponding synthetic wave-fields evolution have been obtained.     

利用臭氧氧化实现复合生物反应器污泥减量

采用复合生物反应器,对应用臭氧氧化实现污泥减量进行了研究。2个相同的复合生物反应器平行运行,1个作为对照系统,1个作为氧化系统。反应器内装有半软性填料,投加量为10%。曝气池中悬浮污泥浓度为1 500 mg/L左右,生物膜浓度为2 000 mg/L左右。试验结果表明,随着臭氧氧化污泥比例的增加,污泥表观产率系数也随之降低,当臭氧投量为0.05 g O3/gSS,每天氧化的污泥分别为反应器内污泥的10%,20%,30%时,污泥表观产率系数分别减少28.2%,44.9%,75.8%。虽然随着污泥氧化比例的增大,氧化系统出水CODcr略有增加,但氧化系统仍能保持其生物处理能力,CODcr去除率在92%以上;2个系统之间氨氮的去除率相差不大,氧化系统的硝化能力基本没有受到臭氧氧化的影响。     

ArcSDE压缩二进制存储格式的研究与改进

ArcSDE压缩二进制是ArcSDE在关系型数据库(RDBMS)中保存地理信息中二进制几何图形的存储格式,这种格式采用将浮点几何数据整形化的方法进行数据压缩,减少了数据存储空间,同时也加快了数据在网络上传输的速度。本文通过对ArcSDE压缩二进制存储格式的研究与分析,指出了这种格式在存取和处理效率上的不足之处,并提出了更为高效的改进方法。     

Automated Extraction of a Five‐Year LA‐ICP‐MS Trace Element Data Set of Ten Common Glass and Carbonate Reference Materials: Long‐Term Data Quality,Optimisation and Laser Cell Homogeneity

LA‐ICP‐MS is increasingly applied to obtain quantitative multi‐element data with minimal sample preparation, usually achieved by calibration using reference materials (RMs). However, some ubiquitous RMs, for example the NIST SRM 61× series glasses, suffer from reported value uncertainties for certain elements. Moreover, no long‐term data set of analyses conducted over a range of ablation and tuning conditions exists. Thus, there has been little rigorous examination of the extent to which offsets between measured and reported values are the result of error in these values rather than analytically induced fractionation. We present new software (‘LA‐MINE’), capable of extracting LA‐ICP‐MS data with no user input, and apply this to our system, yielding over 5 years of data (~ 5700 analyses of ten glass and carbonate RMs). We examine the relative importance of systematic analytical bias and possible error in reported values through a mass‐specific breakdown of fourteen of the most commonly determined elements. Furthermore, these data, obtained under a wide range of different ablation conditions, enable specific recommendations of how data quality may be improved, for example the role of diatomic gas, the effect of differential inter‐glass fractionation factors and choice of transport tubing material. Finally, these data demonstrate that the two‐volume Laurin ablation cell is characterised by no discernible spatial heterogeneity in measured trace element ratios.     

Direct numerical simulation of flow over a slotted cylinder at low Reynolds number

Direct numerical simulation was conducted to investigate the flow past a slotted cylinder at low Reynolds number (Re) of 100. The slotting of cylinder affects the boundary layer separation, vortex formation position, recirculation region length and wake width, which are determined by the type of slit. The streamwise slit (SS1), T-shaped slit (SS3) and Y-shaped slit (SS4) act as passive jets, while the transverse slit (SS2) achieves an alternate self-organized boundary layer suction and blowing. The flow rate in slits fluctuates over time due to the alternate vortex shedding and fluctuating pressure distribution around the cylinder surface. One fluctuation cycle of flow rate is caused by a pair of vortices shedding for SS2, SS3 and SS4, while it is created by each vortex shedding for SS1. The wall shear stress and flow impact on the slit wall partly contribute to the hydrodynamic forces acting on the slotted cylinder. Taking into account the internal wall of slit, the transverse slit plays the best role in suppressing the fluid forces with drag reduction of 1.7% and lift reduction of 17%.