土石混合体-基岩界面剪切力学特性块石尺寸效应

土石混合体-基岩界面的抗剪强度是控制坡体稳定性的重要参数之一,是工程设计的重要参数。为探究块石尺寸对土石混合体-基岩界面剪切力学特性的影响,开展了含不同块石尺寸的土石混合体-基岩界面室内大型剪切试验。结果表明：接触界面的破坏模式受块石尺寸和法向压力的影响不显著,均表现为应变硬化特征;法向压力会削弱块石尺寸效应的影响;随块石尺寸增加,抗剪强度和抗剪强度指标（φ、c）先增加后减少,既存在着正尺寸效应,又存在着负尺寸效应,尺寸效应对内摩擦角φ的影响有限,整体在29°波动,而对表观黏聚力c影响较大;不同块石尺寸试样在不同法向压力作用下均表现出了明显的剪缩行为,法向压力能够增强土石混合体的剪缩特性;土石混合体-基岩界面为薄弱的潜在滑移面,随着块石尺寸系数的增加,薄弱破坏面有向土石混合体内部转化的趋势。     

甘肃北山营盘大墩北红柱石矿床地质特征及成因探讨

红柱石矿床产于花岗闪长岩与上元古界震旦系地层之外接触带,该矿床属高铝泥质沉积岩在区域变质产物的基础上,再经后期接触热变质成矿,成矿后的动力变质作用及热液改造迹象比较明显。     

基于要素流的长三角城市群空间布局

以长三角城市群30个地级市市区为研究单元,从要素流动的动态视角,建立要素流的数理模型,借助于ArcGIS软件,对长三角城市群内城市的经济流、交通流和信息流的强度和方向进行定量分析和评价,运用赋值法对3种要素流总量进行评分,并进行空间层级划分。得出核心区（包括上海、江苏沿江八市、环杭州湾地区等地市）和辐射影响区（位于长三角两翼的地市）。基于城市间的空间联系特征和城市群的空间层级结构,对长三角城市群的空间发展布局提出进一步引导和规划,即上海为核心,苏州、南京、杭州、合肥和徐州为区域性中心城市,构成以沪宁合、沪杭、沪徐和沪温为4个发展轴的反“K”字型的空间形态,依据城市区位和要素联系特征,将城市群进一步划分为6个城市组团,形成以中心城市为增长节点、以发展轴为联结线、以城市组团为发展域的“点―线―面”有序发展的空间互动格局。     

侵入接触构造的地质力学研究

本文介绍了作者运用地质力学方法、原理并借鉴国际研究动态,涉足侵入接触构造研究获取的部分成果。基本要点包括:(1)侵入接触构造自成系统;(2)可分3种基本型式;(3)是岩体侵位动力和区域构造应力双重作用的结果;(4)控矿构造的多期活动与水压破裂相关;(5)一般所谓外接触带构造,实质为热动力变质构造.      

塔里木盆地哈得4油田成藏年代学研究

哈得4油田是近年来在满加尔凹陷北部发现的第一个海相油田，一直被认为是喜山期形成的油藏。然而，根据包裹体测温、伊利石K／Ar同位素测年以及油气水界面追溯等多种方法对其成藏年代重新研究表明，该油田主力油藏石碳系CⅢ油藏主杰晚海西期形成的古油藏，C5薄砂层油藏则可能为喜山期由CⅢ油藏垂向调整形成的次生油藏。     

Kinetics of bubble collision and attachment to hydrophobic solids: I. Effect of surface roughness

Influence of surface roughness of the Teflon plates on kinetics of the bubble attachment was studied. Phenomena occurring during collisions of the air bubble, rising in clean water, with Teflon plates, differing only in their surface roughness, were recorded and analysed using a high-speed camera. Variations of the local velocity of the bubble during the collisions and the time of the bubble attachment were determined. It was found that the Teflon surface roughness was the parameter of a crucial importance for the attachment time of the colliding bubble. Depending on degree of the surface roughness the time of the attachment varied by over order of magnitude (from 3 to over 80 ms). In the case the Teflon surfaces having roughness below 1 μm there were recorded four to five “approach–bounce” cycles prior to the bubble attachment. Moreover, after the first collision the rapid pulsations of the bubble shape (within fraction of millisecond) were recorded. For surfaces of roughness ca. 50 μm and larger the attachment always occurred during the first collision—there was no bouncing observed and the time of the attachment was below 3 ms. It was documented that presence of a micro-bubble at the surface facilitated attachment of the colliding bubble.     

福建华安玉的矿物学特征及成因研究

通过福建华安玉野外地质观察、室内显微镜下观察、矿物电子探针分析和X射线粉末衍射分析,研究了华安玉的结构构造和矿物组成,结果表明: 华安玉显示出不同艳丽的条带,实质上是不同矿物分带的体现,绿-墨绿色条带主要由铁次透辉石组成,红色或淡肉红色条带主要由钾长石组成,灰白色或乳白色条带主要由石英、方解石等矿物组成。并对华安玉的形成构造环境和成因进行了初步研究,认为其形成于被动大陆边缘的潮坪泻湖环境,原岩主要是钙质粉砂岩、泥灰岩、硅质岩等,燕山期强烈的构造岩浆活动对其进行了多期热接触变质或交代作用,钙质粉砂岩、泥灰岩、硅质岩等经变质成为透辉石角岩。     

贺兰山及周边地区加里东运动研究

基于对贺兰山及周边地区下古生界详细的野外地质调查,通过碎屑锆石年龄谱的物源分析、地层接触关系追踪、岩性岩相突变特征分析、残留地层分布、古生物组合及亲缘性分析,讨论了阿拉善地块与华北地块和中祁连地块的亲缘关系,探讨了研究区加里东运动的幕次,认为早古生代阿拉善地块和华北地块相互独立,俯冲造山特征建造不清晰,两者之间可能为转换型陆缘。阿拉善地块和中祁连地块之间的加里东运动幕次清晰。加里东运动一幕发生在中-晚寒武世,香山群深水复理石沉积和张夏组浅水碳酸盐台地相沉积呈拼合式接触,生物组合为亲华北-亲祁连混合型,彼时中祁连地块从Rodinia大陆裂离,逐步靠近阿拉善地块;加里东运动二幕发生在早-中奥陶世,下奥陶统碳酸盐岩在全区稳定分布,与下伏香山群不整合接触,与阿不且亥组整合接触,生物相统一,生物组合为华北型,中祁连地块-阿拉善地块-华北地块平和成为一个统一的块体,整体为浅水台地沉积环境;加里东运动三幕发生在奥陶纪末,中-上奥陶统与泥盆系角度不整合接触,商丹洋闭合,扬子地块与阿拉善地块和华北地块靠近,商丹缝合带南部的宽坪洋打开,导致研究区中、晚奥陶世亲华北-亲扬子混合型生物组合类型。     

降雨作用下碎石土滑坡解体变形破坏机制研究

为了揭示碎石土滑坡的变形解体破坏机制,结合工程实例,通过资料搜集整理和分析、现场工程地质调查与勘探和室内外的物理力学试验,采用不平衡推力法、数理统计分析方法和三维弹塑性接触有限元算法,以及运用碎石土边坡地下水管网状排泄系统理论,分析降雨作用下碎石土滑坡的变形解体破坏过程,揭示了降雨作用下中深层碎石土滑坡变形解体破坏的主要机制和一般的力学机制。结果表明,一定强度的长时间连续降雨或强降雨是中深层碎石土滑坡发生失稳的主要触发因素;采用考虑降雨作用的弹塑性接触有限元算法,可以更好地反映该类型滑坡在降雨作用下所处的实际状态及滑坡的滑动过程,可以为该类型滑坡稳定性的准确评价和预测预报提供可资借鉴的方法。     

Mechanism on Moho offset induced by aseismic slip of deeply buried faults

Recent high-resolution deep seismic reflection profile across the Kunlun fault in northeastern Tibet shows clearly that the Moho is cut off by a complex thrust fault system. Moho offset is a general phenomenon, but little is known about the dynamic mechanism. In this study, contact models with Maxwell materials are used to simulate the mechanical process of Moho offset induced by the aseismic slip of deeply buried faults. Based on the seismic reflection data, we project a single fault model and a complex fault system model with two faults intersecting. The deformations of the Moho, the aseismic slips, and contact stresses on faults in different models are discussed in detail. Results show that the Moho offset might be produced by aseismic slip of deeply buried faults, and the magnitude is influenced by the friction coefficient of faults and the viscosity of the lower crust. The maximum slip occurs near the Moho on the single fault or at the crossing point of two intersecting faults system. Stress concentrates mainly on the Moho, the deep end of faults, or the crossing point. This study will throw light on understanding the mechanism of Moho offset and aseismic slip of deeply buried faults. The results of complex fault system with two faults intersecting are also useful to understand the shallow intersecting faults that may cause earthquakes.