Mineralogical characterization of potential targets for the ASTEX mission scenario

In-situ investigation of asteroids is the next logical step in understanding their exact surface mineralogy, petrology, elemental abundances, particle size distribution, internal structure, and collisional evolution. Near-Earth asteroids (NEAs) provide us with ample opportunities for in-situ scientific exploration with lower Δv requirements and subsequently lower costs than their main belt counterparts. The ASTEX mission concept aims at surface characterization of two compositionally diverse NEAs, one with primitive and the other with a strong thermally evolved surface mineralogy. Here we present the first results of our ground-based characterization of potential ASTEX mission targets using the SpeX instrument on the NASA IRTF. Of the four potential targets we characterized, two (1991 JW and 1998 PA) have compositions similar to ordinary chondrite mineralogy. The other two targets (1994 CC and 1999 TA10) are thermally evolved objects with igneous formation histories. While 1994 CC is a triplet system and thus very challenging to orbit the V-type NEA, 1999 TA10 is the most interesting scientific ASTEX target identified so far.     

Volatile retention from cometary impacts on the Moon

Impacts of comets and asteroids play an important role in volatile delivery on the Moon. We use a novel method for tracking vapor masses that reach escape velocity in hydrocode simulations of cometary impacts to explore the effects of volatile retention. We model impacts on the Moon to find the mass of vapor plume gravitationally trapped on the Moon as a function of impact velocity. We apply this result to the impactor velocity distribution and find that the total impactor mass retained on the Moon is approximately 6.5% of the impactor mass flux. Making reasonable assumptions about water content of comets and the comet size-frequency distribution, we derive a water flux for the Moon. After accounting for migration and stability of water ice at the poles, we estimate a total 1.3×10⁸-4.3×10⁹ metric tons of water is delivered to the Moon and remains stable at the poles over 1 Ga. A factor of 30 uncertainty in the estimated cometary impact flux is primarily responsible for this large range of values. The calculated mass of water is sufficient to account for the neutron fluxes poleward of 75° observed by Lunar Prospector. A similar analysis for water delivery to the Moon via asteroid impacts shows that asteroids provide six times more water mass via impacts than comets.     

Titan's surface at 2.2-cm wavelength imaged by the Cassini RADAR radiometer: Calibration and first results

The first comprehensive calibration and mapping of the thermal microwave emission from Titan's surface is reported based on radiometric data obtained at 2.2-cm wavelength by the passive radiometer included in the Cassini Radar instrument. The data reported were accumulated from 69 separate observational segments in Titan passes from Ta (October 2004) through T30 (May 2007) and include emission from 94% of Titan's surface. They are diverse in the key observing parameters of emission angle, polarization, and spatial resolution, and their reduction into calibrated global mosaic maps involved several steps. Analysis of the polarimetry obtained at low to moderate resolution (50+ km) enabled integration of the radiometry into a single mosaic of the equivalent brightness temperature at normal incidence with a relative precision of about 1 K. The Huygens probe measurement of Titan's surface temperature and radiometry obtained on Titan's dune fields allowed us to infer an absolute calibration estimated to be accurate to a level approaching 1 K. The results provide evidence for a surface that is complex and varied on large scales. The radiometry primarily constrains physical properties of the surface, where we see strong evidence for subsurface (volume) scattering as a dominant mechanism that determines the emissivity, with the possibility of a fluffy or graded-density surface layer in many regions. The results are consistent with, but not necessarily definitive of a surface composition resulting from the slow deposition and processing of organic compounds from the atmosphere.     

Assessing the effectiveness of imperviousness on stormwater runoff in micro urban catchments by model simulation

Imperviousness, considered as a critical indicator of the hydrologic impacts of urbanization, has gained increasing attention both in the research field and in practice. However, the effectiveness of imperviousness on rainfall–runoff dynamics has not been fully determined in a fine spatiotemporal scale. In this study, 69 drainage subareas <1 ha of a typical residential catchment in Beijing were selected to evaluate the hydrologic impacts of imperviousness, under a typical storm event with a 3‐year return period. Two metrics, total impervious area (TIA) and effective impervious area (EIA), were identified to represent the impervious characteristics of the selected subareas. Three runoff variables, total runoff depth (TR), peak runoff depth (PR), and lag time (LT), were simulated by using a validated hydrologic model. Regression analyses were developed to explore the quantitative associations between imperviousness and runoff variables. Then, three scenarios were established to test the applicability of the results in considering the different infiltration conditions. Our results showed that runoff variables are significantly related to imperviousness. However, the hydrologic performances of TIA and EIA were scale dependent. Specifically, with finer spatial scale and the condition heavy rainfall, TIA rather than EIA was found to contribute more to TR and PR. EIA tended to have a greater impact on LT and showed a negative relationship. Moreover, the relative significance of TIA and EIA was maintained under the different infiltration conditions. These findings may provide potential implications for landscape and drainage design in urban areas, which help to mitigate the runoff risk. Copyright © 2015 John Wiley & Sons, Ltd.     

Control of Aptian palaeobathymetry on turbidite distribution in the Buchan Graben,Outer Moray Firth,Central North Sea

It is widely recognised that palaeobathymetry is a key control on the distribution of turbidite deposits. Thus, the utilisation of palaeobathymetric surfaces as an input for numerical turbidity current modelling offers a potentially powerful method to predict the distribution of deep marine sands in ancient (subsurface or outcrop) successions. Such an approach has been tested on an Aptian turbidite deposit from the Buchan Graben, UK Central North Sea, where modelled sand distributions could be quality controlled against available well data.     

鲜水河断裂带大震复发机制和时空分布原因

岩石接触面在高温高围压下经过几天便烧结起来而有很高但低于原岩的剪切强度。烧结面与主压应力方向夹角大于55—65°时,便不再断裂而沿其它方向剪断。实验最低温压相当地壳10km深,这应是地壳大断裂的上部裂面与下部烧结层的界限深度,受力后便向下延裂,在下部形成震源。这可能是鲜水河断裂带震源在10—25km深重复发生的原因。由带内大震机制解P轴方向与地球自转速率变化趋势的关系、区域残余应力场水平主压应力分布方向与断裂带走向的关系,讨论了带内大震活动时段的原因。由带内裂面烧结条件、残余和现今应力高值区、岩体低强度区及储存弹性应变能高值区的分布,研究了带内大震空间分布原因。     

Estimation Of Sensible Heat Flux From The Surface Temperature Wave And One-Time-Of-Day Air Temperature Observation, Part Ii – Heterogeneous Surfaces

By means of the algorithm presented in Part I of this study, the temporal course H(t) and the daily mean H of the sensible heat flux H can be determined from measurements of the thermodynamic surface temperature (as a function of time) and from a one-time-of-day air temperature observation. Inaddition to these temperatures, one needs estimates of daily mean wind speed,of the roughness lengths of momentum and heat transfer, and of the displacementheight. In Part I, the algorithm was derived for areas with homogeneous surfaces,i.e., with uniform surface temperature, and the method was verified with measurements taken during several field campaigns. The root mean square error for the temperature difference between surface and air, in the comparison between measurement and model, amounted to one or two kelvin, and the error of H was 10 to 25 per cent. The method can be used to determine the sensible heat flux from measurements of surface temperatures by satellites, but can also be applied to ground based measurements.In Part II, the procedure is generalized for areas that consist of various surface types (sub-regions) with different surface temperatures, and can be usedwhen only a few (at least one) air temperature measurements per day are available over only one of the different sub-regions. This generalization should allow improvements to the estimates for H(t) by means of temperature measurements from, e.g., NOAA/AVHRR or LANDSAT/TM, taking into account the heterogeneity of the area contained in one METEOSAT pixel. Criteria are given as to whether effective (areal mean) surface temperatures and roughness lengths may be used for the computation of H or if the above mentioned generalized procedure has to be applied. The new algorithm is verified by measurements sampled during the field campaigns EFEDA 91 (Spain) and HIBE 89 (Hildesheimer Börde in Germany), and by using synthetic data (due to the lack of measured data) for one further combined surfacetype [soil and water (lakes)].     

A survey of possible impact structures on 25143 Itokawa

We determined the morphologies and dimensions of possible impact craters on the surface of Asteroid 25143 Itokawa from images taken by the Hayabusa spacecraft. Circular depressions, circular features with flat floors or convex floors, and circular features with smooth surfaces were identified as possible craters. The survey identified 38 candidates with widely varying morphologies including rough, smooth and saddle-shaped floors, a lack of raised rims and fresh material exposures. The average depth/diameter ratio was 0.08±0.03: these craters are very shallow relative to craters observed on other asteroids. These shallow craters are a result of (1) target curvature influencing the cratering process, (2) raised rim not being generated by this process, and (3) fines infilling the craters. As many of the crater candidates have an unusual appearance, we used a classification scheme that reflects the likelihood of an observed candidate's formation by a hypervelocity impact. We considered a variety of alternative interpretations while developing this scheme, including inherited features from a proto-Itokawa, spall scars created by the disruption of the proto-Itokawa, spall scars following the formation of a large crater on Itokawa itself, and apparent depressions due to random arrangements of boulders. The size-frequency distribution of the crater candidates was close to the empirical saturation line at the largest diameter, and then decline with decreasing diameter.     

A deeper look at the colors of the saturnian irregular satellites

We have performed broadband color photometry of the twelve brightest irregular satellites of Saturn with the goal of understanding their surface composition, as well as their physical relationship. We find that the satellites have a wide variety of different surface colors, from the negative spectral slopes of the two retrograde satellites S IX Phoebe (S^′=−2.5±0.4) and S XXV Mundilfari (S^′=−5.0±1.9) to the fairly red slope of S XXII Ijiraq (S^′=19.5±0.9). We further find that there exist a correlation between dynamical families and spectral slope, with the prograde clusters, the Gallic and Inuit, showing tight clustering in colors among most of their members. The retrograde objects are dynamically and physically more dispersed, but some internal structure is apparent.     

Nature of the small main belt Asteroid 3169 Ostro

We present a set of rotational lightcurve measurements of the small main belt Asteroid 3169 Ostro. Our observations reveal an unambiguous, double-peaked rotational lightcurve with a peak-to-peak variation up to 1.2±0.05 mag and a synodic period of 6.509±0.001 h. From the large flux variation and the overall shape of the lightcurves, we suggest that 3169 Ostro could be a tightly bound binary or a contact binary, similar to the Trojan Asteroid 624 Hektor. A shape model of this system is proposed on the assumption that 3169 Ostro is a Roche binary described by a pair of homogeneous elongated bodies, with a size ratio of 0.87, in hydrostatic equilibrium and in circular synchronous motion around each other. The direction of the spin axis is determined modulo 180° by its J2000 ecliptic coordinates λ₀=50±10°, β₀=±54±5°. The binary interpretation and the pole solution adequately fit the earlier photometric observations made in 1986 and 1988. However, additional supporting lightcurves are highly desirable especially in the next mutual events occurrence of 2008 and 2009 in order to remove the pole ambiguity and to confirm unambiguously the binary nature of 3169 Ostro.