预破裂中声波信号参数特性

通过对岩石样品进行变形及破坏试验，研究断裂形成过程中的声发射记录（ＡＥ），以找到能解释地震前兆现象的方法．另外，对试验过程中获得的大量数据及资料进行了数理统计处理．     

B-polarization induction in two thin half-sheets coupled to the mantle by a conducting crust—II. Solution by the mode-matching method, the fields above the conductors, and example results

The mode-matching method is used to obtain an exact analytical solution to the problem of B -polarization induction in two adjacent thin half-sheets, lying on a conducting layer that is terminated by a perfect conductor at finite depth. These components of the model represent, respectively, the Earth's conducting surface layers, crust, and mantle. In dimensionless variables, the model has three independent parameters, these being the two thin-sheet conductances and the layer thickness. The mode-matching solution obtained in this paper is shown to be identical lo that derived via the Wiener-Hopf method in a companion paper (Dawson 1996), and so provides additional verification of that solution. As was shown in the companion paper, the solution for the present model contains, as special limiting cases, those for three models considered earlier by various authors. The second part of the present paper addresses the solutions for the electric fields in the non-conducting half-space above the conductors, which represents the atmosphere. In the final part, sample numerical calculations are presented to illustrate the solution.     

声波在两种多孔介质界面上的反射和透射

本文导出了声波在两种多孔介质界面上反射、透射的一般计算公式.作为例子,数值计算了P₁波入射于界面时,P₁、P₂和S波的反射、透射系数与声波频率、入射角等量之间的关系.结果表明,各种模式波的反射、透射系数与入射角、多孔介质性质有关,在Biot特征频率附近与频率有关,并用界面两侧的法向能流相等验证了结果的正确性.若把多孔介质当作均匀固体处理,将会得到显著不同的结果.     

Estimation of abl Parameters Using the Vertical Velocity Measurements of an Acoustic Sounder

The friction velocity, the surface heat flux and the height of the Atmospheric Boundary Layer (ABL) are important parameters. In this work, vertical velocity variance ( _w ² ) and wind velocity structure parameter (C _v ² ) profiles estimated by acoustic sounder measurements are used, along with similarity relations, to estimate these parameters in the unstable Atmospheric Boundary Layer and the friction velocity in the stable one. The data were collected by two acoustic sounders with different height range and resolution under various atmospheric conditions (stability) and at two experimental sites in different terrain. The C _v ² profiles are estimated using gate difference of the vertical velocity measurements and the assumption of local isotropy. The vertical velocity data are corrected for the significant effects of noisy measurements and sampling volume averaging on the _w ² and C _v ² estimations using original techniques that are presented in this work. The results of the similarity method using acoustic sounder data are compared against estimates of the corresponding atmospheric parameters obtained from direct measurements. The comparison confirms the ability of the method to provide reasonably accurate estimates of these parameters especially in the middle of the day.     

山西义兴寨金矿床金矿物颗粒的产出及其成矿动力学意义

山西义兴寨金矿床的金主要呈包体金和裂隙金两种产出状态.文章根据成矿地球化学动力学理论,论证了金元素在含矿断裂发生脆性破裂和脆-韧性扩张活动中析出的化学反应类型,以及受反应动力学条件的制约,形成矿石中金不同产出状态的规律.指出热液矿床中普遍存在的包体金为热液成矿早期阶段断裂发生脆性破裂和成矿流体沸腾,导致快速反应结晶的产物;而裂隙金和晶隙金为成矿晚期金等矿质在流体中残余富集,同时成矿断裂再次发生脉动破裂,即成矿热力学演化与有利的构造动力学因素耦合作用的结果.得出金矿物颗粒的产出状态具有成矿动力学意义的结论.     

阿拉斯加输油管的设计和施工方式方案变更过程及其背后的原因和哲学思想

阿拉斯加输油管道公司曾经研发和使用了3种主要施工方案和技术:传统地埋式、特殊埋设和地上敷设方式.在传统地埋式施工方案中,管顶埋深变化于0.9~2.7 m.这主要是考虑了地形变化,而不是沿途的岩性和土壤类型.在特殊埋设方案中,在原油管道必须埋设的地段,如大规模动物迁徙常用地段则使用通道冷液循环降(保)温系统和(或)热管(桩)降(保)温,来保护多年冻土.地上敷设方案包括桩基架设和地上洁净砾石管堤(垫护层).后者只在管道进入和离开多年冻土时采用.架设桩基横梁方案中使用有或没有热管保温的垂直支架梁(单元)(VSM).在初步规划和设计阶段,管道的业主公司(即横穿阿拉斯加管道系统,或TAPS)和随后的阿拉斯加管道服务公司(APSC)不容商量的坚决要求100%的埋设方案.但是,随着勘察工作的进展和设计方案的细化,施工设计方案在不断变化.1977年管道施工结束时,只有57%的管道采用了埋设方式.管道运行30 a后的今天(考虑运行期间维护中所产生的问题),很多经验丰富的工程师认为53%的埋设可能更合理.设计和施工方案变更的原因主要有:1)为了获得通过联邦政府所属的土地所需的许可证,政府有特殊的规定和要求;2)管道公司的设计、施工和管理人员进行了现场野外调查、研究,并积极参与了详细设计和研发;3)美国环境政策法案(NEPA)的最新要求(启用了核准制).阿拉斯加管道服务公司是7家主要石油公司的服务机构.由于这个项目的巨大规模和所涉及的高昂费用,致使各大石油公司的工程师非同寻常程度的参与.在文章中,笔者论述了与阿拉斯加管道施工有关的阿拉斯加管道服务公司、美国联邦和阿拉斯加州政府相关组织机构的形成历史,管道设计演变过程及其背后的哲学思想,以及阿拉斯加管道工程项目的经验和教训.     

Aggregate production: Fines generation during rock crushing

The energy required to crush rocks is proportional to the amount of new surface area that is created; hence, a very important percentage of the energy consumed to produce construction aggregates is spent in producing non-commercial fines. Data gathered during visits to quarries, an extensive survey and laboratory experiments are used to explore the role of mineralogy and fracture mode in fines production during the crushing of single aggregates and aggregates within granular packs. Results show that particle-level loading conditions determine the failure mode, resulting particle shape and fines generation. Point loading (both single particles and grains in loose packings) produces clean fractures and a small percentage of fines. In choked operations, high inter-particle coordination controls particle-level loading conditions, causes micro-fractures on new aggregate faces and generates a large amount of fines. The generation of fines increases when shear is imposed during crushing. Aggregates produced in current crushing operations show the effects of multiple loading conditions and fracture modes. Results support the producers' empirical observations that the desired cubicity of aggregates is obtained at the expense of increased fines generation when standard equipment is used.