山东长岛黄土沉积物的磁性与碳酸盐特征及其环境意义初探

通过对长岛沉积物采样和磁性测试,分析和讨论了长岛黄土沉积物的磁性特征:该剖面磁性矿物的含量并不是很高,且以亚铁磁性矿物为主,磁性矿物的粒度主要以细粒为主,亚铁磁性矿物的变化在沉积物磁性变化中占主导地位.通过对沉积物磁性特征和碳酸盐特征的对比发现:该剖面沉积物磁化率和碳酸盐具有很好的对应关系,并且明显表现出4个阶段的主要变化,对应了暖湿和冷干的气候旋回.根据沉积物的磁化率与古气候环境的内在联系,结合碳酸盐含量变化情况,对该地区风成沉积物的物源变迁及环境演变也进行了初步探讨和分析.     

基于3S技术和USLE的深圳市茜坑水库流域土壤侵蚀强度预测研究

基于RS、GPS和GIS(3S技术)的集成提出了USLE 6大因子的算法,在建立的专题地理信息数据库基础上,运用USLE对深圳市茜坑水库流域的土壤侵蚀强度进行预测和估算.结果表明:整个流域90.5%的区域土壤流失强度为中度以下,强度侵蚀以上的区域虽然仅占整个流域面积的9.5%,但是年土壤侵蚀量达到了整个流域土壤侵蚀量的49.4%.流域土壤侵蚀强度和植被覆盖情况明显相关,茜坑水库流域的东北山区部分是整个流域的严重侵蚀区.研究证明:在3S技术集成支持下,采用USLE对流域的土壤流失强度进行预测和估算的方法具有直观、方便、快捷的优点,成果能充分满足小流域水土保持工作的需要.     

海南三亚地区S4指数与C/N、ROTI的比较分析

本文通过利用海南三亚站（1834°N, 10962°E）GPS闪烁/TEC接收机2004年8月到2005年7月间观测数据，在对三亚地区闪烁初步统计分析的基础上，比较分析了观测数据中S₄（幅度闪烁指数）和C/N（载噪比），S₄和ROTI（TEC变化率标准差）的关系，同时对2004年11月7日的闪烁事件进行了具体的分析. 通过比较分析得出：（1）三亚地区全年的闪烁强度具有明显的半年变化，在春秋季出现全年闪烁强度的最大值；（2）S₄与C/N具有很好的负相关性；（3）ROTI可以作为由小尺度不规则结构引起闪烁出现的指示剂.     

NUMERICAL STUDY ON THE MIXING OF UNSORTED SEDIMENT PARTICLES DISCHARGED INTO A CROSS-FLOW BY MULTIPHASE PARTICLE-IN-CELL （MP-PIC） METHOD

The mixing characteristics of dredged sediments of variable size discharged into cross-flow are studied by an Eulerian-Lagrangian method. A three-dimensional (3D) numerical model has been developed by using the modified k-ε parameterization for the turbulence in fluid phase/water and a Lagrangian method for the solid phase/sediments. In the model the wake turbulence induced by sediments has been included as additional source and sink terms in the k-ε model; and the trajectories of the sediments are tracked by the Lagrangian method in which the sediment drift velocities in cross-flow are computed by a multiphase particle-in-cell (MP-PIC) method and the diffusion process is approximated by a random walk model. The hydrodynamic behavior of dumped sediment cloud is governed by the total buoyancy on the cloud, the drag force on each particle and velocity of cross-flow. The cross-flow destroys more or less the double vortices occurred in stagnant ambience and dominates the longitudinal movement of sediment cloud. The computed results suggest satisfactory agreement by comparison with the experimental results of laboratory.     

The effect of interpolation methods in surface definition: an experimental study

Mappings of the earth surface and their representation in 3D (three‐dimensional) models are commonly used in most recent research. Modeling research, which starts with classical surveying methods, acquires new dimensions matching the modern technologies. 3D models of any object or earth surface can be used in much visual and scientific research. A digital model of the landscape is an important part within creation of geo‐information systems used in the public administration and in the commercial sphere. It is an important tool in applications such as geomorphology, hydrology, geology, cartography, ecology, mining etc. Values of volume in terrains that do not have regular geometric structure can be obtained more accurately by using 3D models of surfaces with respect to developing technology. Basic data of 3D models must indicate 3D coordinates of the surveyed object in the reference frame. Distribution and intensity of points are important factors in modeling earth surfaces. A minimum number of points is desired in defining an object in 3D. Interpolation methods employing different mathematical models are used to obtain 3D models of terrain surfaces. In this study, the effect of interpolation methods in defining a terrain surface is investigated. For this purpose, a uniform surface, hill‐shaped artificial object with a known volume is employed. The 3D surface and volume are calculated by using 12 different interpolation methods. Point distribution, point intensity and accuracy of point measurements are not considered. The same data set was used for all the interpolation methods. The interpolation methods are compared and evaluated based on the results. Copyright © 2007 John Wiley & Sons, Ltd.     

ACTIVE system for monitoring volcanic activity: A case study of the Izu-Oshima Volcano,Central Japan

A system is proposed for the monitoring of changes in the underground structure of an active volcano over time by applying a transient electromagnetic method. The monitoring system is named ACTIVE, which stands for Array of Controlled Transient-electromagnetics for Imaging Volcano Edifice. The system consists of a transmitter dipole used to generate a controlled transient electromagnetic (EM) field and an array of receivers used to measure the vertical component of the transient magnetic field at various distances, with automatic operation of both units. In order to verify the performance of the proposed system, numerical and field experiments were carried out by application of the system to the Izu-Oshima volcano, where a remarkable change in the apparent DC resistivity over time had been detected in association with the eruption in 1986.     

基于3DSMAX环境的3维场景重建工具

介绍了3DSMAX中利用DEM和数字正射影像重建真实3维场景的方法，通过MAXScript和VC混合编程，在3DSMAX4.0环境中构建了一个3维环境重建工具，利用该工具可以导入Leica/HelavaDPW数字投影测量工作站采集的DEM数据和建筑物数据，自动生成地形模型和建筑物模型，重建真实的3维场景，该工具支持DXF、DSW等通用CAD数据的输入，并可以把场景数据输出为虚拟现实造型语言（VRML）文件。     

3维GIS面向对象数据模型的研究与应用

3维数据模型是3维GIS研究中亟待解决的一个核心问题。在充分分析现有3维数据模型的基础上，从实际应用出发，针对传统模型的不足，提出1种3维GIS面向对象数据模型，以解决空间不规则实体本身，以及实体间复杂关系的描述、表达和组织等关键问题，并给出此模型应用实例，证明此模型的可行性和实用性。     

GIS在"数字城市"中的应用与研究

根据在“数字厦门”项目策划、建设和应用推广的实际经验，对“数字城市”的理解作了阐述，介绍了“数字厦门”的主要建设内容和应用情况，探讨了与GIS有关的问题。     

3S技术在黑龙江省防汛指挥系统中的应用

文章简要介绍了黑龙江省防汛指挥系统建设的目标 ,论述了 3S技术是该系统应用的关键技术 ,以及展现了 3S技术在该系统应用的发展趋势。