Towards a direct collapse–load method of design for concrete frames subjected to severe ground motions

Most current methods of design for concrete structures under earthquake loads rely on highly idealized ‘equivalent’ static representations of the seismic loads and linear‐elastic methods of structural analysis. With the continuing development of non‐linear methods of dynamic analysis for the overload behaviour and collapse of complete concrete structures, a more direct and more accurate design procedure becomes possible which considers conditions at system collapse. This paper describes an evaluation procedure that uses non‐linear dynamic collapse–load analysis together with global safety coefficients. A back‐calibration procedure for evaluating the global safety coefficients is also described. The aim of this paper is to open up discussion of alternative methods of design with improved accuracy which are necessary to move towards a direct collapse–load method of design. Copyright © 2002 John Wiley & Sons, Ltd.     

Book Review

In this paper, we examine the applicability of spatial optimization as a generative modelling technique for sustainable land‐use allocation. Specifically, we test whether spatial optimization can be used to generate a number of compromise spatial alternatives that are both feasible and different from each other. We present a new spatial multiobjective optimization model, which encourages efficient utilization of urban space through infill development, compatibility of adjacent land uses, and defensible redevelopment. The model uses a density‐based design constraint developed by the authors. The constraint imposes a predefined level of consistent neighbourhood development to promote contiguity and compactness of urban areas. First, the model is tested on a hypothetical example. Further, we demonstrate a real‐world application of the model to land‐use planning in Chelan, a small environmental amenity town in the north‐central region of the State of Washington, USA. The results indicate that spatial optimization is a promising method for generating land‐use alternatives for further consideration in spatial decision‐making.     

Stream nitrate uptake and transient storage over a gradient of geomorphic complexity,north‐central Colorado,USA

The understanding of nutrient uptake in streams is impeded by a limited understanding of how geomorphic setting and flow regime interact with biogeochemical processing. This study investigated these interactions as they relate to transient storage and nitrate uptake in small agricultural and urban streams. Sites were selected across a gradient of channel conditions and management modifications and included three 180‐m long geomorphically distinct reaches on each of two streams in north‐central Colorado. The agricultural stream has been subject to historically variable cattle‐grazing practices, and the urban stream exhibits various levels of stabilisation and planform alteration. Reach‐scale geomorphic complexity was characterised using highly detailed surveys of channel morphology, substrate, hydraulics and habitat units. Breakthrough‐curve modelling of conservative bromide (Br^?) and nonconservative nitrate (NO₃^?) tracer injections characterised transient storage and nitrate uptake along each reach. Longitudinal roughness and flow depth were positively associated with transient storage, which was related to nitrate uptake, thus underscoring the importance of geomorphic influences on stream biogeochemical processes. In addition, changes in geomorphic characteristics due to temporal discharge variation led to complex responses in nitrate uptake. Copyright © 2011 John Wiley & Sons, Ltd.     

3-D Geological Modeling–Concept, Methods and Key Techniques

3-D geological modeling plays an increasingly important role in Petroleum Geology, Mining Geology and Engineering Geology. The complexity of geological conditions requires different modeling methods in different situations. This paper summarizes the general concept of geological modeling; compares the characteristics of borehole-based modeling, cross-section based modeling and multi-source interactive modeling; analyses key techniques in 3-D geological modeling; and highlights the main difficulties and directions of future studies.     

Cross-calibration of brightness temperature obtained by FY-3B/MWRI using Aqua/AMSR-E data for snow depth retrieval in the Arctic

This study cross-calibrated the brightness temperatures observed in the Arctic by using the FY-3B/MWRI L1 and the Aqua/AMSR-E L2A. The monthly parameters of the cross-calibration were determined and evaluated using robust linear regression. The snow depth in case of seasonal ice was calculated by using parameters of the crosscalibration of data from the MWRI T_b. The correlation coefficients of the H/V polarization among all channels T_b of the two sensors were higher than 0.97. The parameters of the monthly cross-calibration were useful for the snow depth retrieval using the MWRI. Data from the MWRI T_b were cross-calibrated to the AMSR-E baseline.Biases in the data of the two sensors were optimized to approximately 0 K through the cross-calibration, the standard deviations decreased significantly in the range of 1.32 K to 2.57 K, and the correlation coefficients were as high as 99%. An analysis of the statistical distributions of the histograms before and after cross-calibration indicated that the FY-3B/MWRI T_b data had been well calibrated. Furthermore, the results of the cross-calibration were evaluated by data on the daily average T_b at 18.7 GHz, 23.8 GHz, and 36.5 GHz(V polarization), and at 89 GHz(H/V polarization), and were applied to the snow depths retrieval in the Arctic. The parameters of monthly cross-calibration were found to be effective in terms of correcting the daily average T_b. The results of the snow depths were compared with those of the calibrated MWRI and AMSR-E products. Biases of 0.18 cm to 0.38 cm were observed in the monthly snow depths, with the standard deviations ranging from 4.19 cm to 4.80 cm.     

基于时相变化的晴空条件下Himawari-8 AHI火点检测

Himawari-8静止气象卫星具有高空间分辨率、高观测频次和高时效特点,对于火点检测具有很强优势。对Himawari-8卫星的3.9μm和11.2μm两通道亮温进行了连续时相变化研究,得出两通道的亮温在时间上的变化差值稳定且规律明显。根据两通道的亮温时相特征,考虑白天可见光对3.9μm通道的影响,并结合火点产生时引起的亮温变化特征,提出了适用于晴空条件下改进的火点检测算法。在多处进行了此算法的实验,例如2018-11-27 T 16:40(UTC时)河北张家口市桥东区一化工厂附近发生的严重爆炸起火事件以及2019-02-28澳大利亚西南部发生的火灾事件,均快速有效的检测到了火点。实验表明,改进的火点检测算法能很好的进行火点检测,并能解决晨昏交界、冰雪下垫面、常规火源点、太阳耀光等火点检测的难题。     

CSCO_3 CYCLES IN SALAWUSU RIVER BASINSINCE 150KA B.P.

About 70years ago，Frenc卜卜alaeohdoglst回LL sc卜dars al卜ome and a卜road卜ave successively con－HARD de Chardin P．et al．Initiated the Quaternary ducted large amount ofwork on the Later Quaternarygeologlcal research In the ＞alawusu River Basin of strata（TEILHARD，1924； YUAN，1978； LI，1987；desert region of Northern China and established th，ZHENG，1989； SUN et al，1996； LI et al，1993），Salawusu Formation门EILHARD，1924）．Sine，then，palaeobiology…     

基于单程波偏移算子的地表相关多次波成像

在常规地震资料处理中,多次反射波被视为噪声并从地震数据中去除,以免在之后的地震资料解释中造成误解.而事实上,多次波也是地震信号,是照明波场的一部分,能够对地下构造成像的精度做出贡献.本文分析了多次波在传统单程波叠前深度偏移中产生构造假象的机制和表现,为实现基于单程波偏移算子的多次波成像,修改了单程波叠前深度偏移的边界条件,即将输入的震源波场用包含多次波的记录来替代,输入的记录波场用预测出的表层相关多次波来替代,实现了基于单程波偏移算子的地表相关多次波成像,并从理论上给出了其成像依据.通过基于二范式最小能量差原则求取的匹配因子,将多次波成像结果与一次波成像结果进行匹配叠加,应用多次波成像来弥补一次波成像的不足.简单模型验证了基于单程波偏移算子的多次波成像方法的有效性,最后对Sigsbee2B模型进行了一次波与多次波联合成像试算,盐边界高陡构造成像质量得到了明显改善.     

Influence of long‐period filter cut‐off on elastic spectral displacements

The effect of the long‐period filter cut‐off, T_c, on elastic spectral displacements is investigated using a strong ground‐motion database from Europe and the Middle East. The relation between the filter and oscillator responses is considered to observe the influence of T_c for both analogue and digital records, and the variations with site classification, magnitude, filter order and viscous damping. Robust statistics are derived using the re‐processed European data to generalize the effects of the long‐period filter cut‐off on maximum oscillator deformation demands as a function of these seismological and structural features. Statistics with a 95% confidence interval are derived to suggest usable period ranges for spectral displacement computations as a function of T_c. The results indicate that the maximum period at which spectral displacements can be confidently calculated depend strongly on the site class, magnitude and filter order. The period range where reliable long‐period information can be extracted from digital accelerograms is twice that of analogue records. Copyright © 2006 John Wiley & Sons, Ltd.     

塔里木盆地塔中II区奥陶系油气差异性分布及其主控因素分析

为探求塔里木盆地塔中II区奥陶系油气水分布规律,对现有勘探成果及断裂、不整合面、构造背景进行分析,应用常规测井、地震及地化等多种方法开展研究。结果表明:塔中II区奥陶系油气分布在平面上呈现出"马鞍状"三分特征,东部塔中I号坡折带、西部塔中10号断裂带多分布气油比、干燥系数、硫化氢含量、含蜡量相对较高、密度相对较低的凝析气藏,两构造带之间的过渡带以挥发性油藏或油藏分布为主;油气在纵向上主要分布于层间不整合面以下300 m范围内。综合分析认为,不整合面纵向上控制了储层、油气藏的主体发育层位,平面上通过差异溶蚀作用造成的储层非均质性控制了油气的主要分布范围;断裂对储层物性具有明显的改善作用,形成有效的输导通道,控制了油气的充注强度及油气藏类型;斜坡背景上的局部构造高点控制了油气的差异分布,越靠近高点,油气越易富集。