A multiscale work-analysis approach for geotechnical structures

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.     

K-H Instability of Dust Plasma

Areview about K-H instability related to comet tail is presented.The effect of dust graing on KHI is theoretically analysed and relations of critical shear to excit KHI with the properties of dust grains both for sheared ion flow and for sheared dust flow re put out.Their possible application in comet tail is suggested.     

Experimental decipherment of the soft-sediment deformation observed in the upper part of the Talchir Formation (Lower Permian), Jharia Basin, India

Four types of soft-sediment folds of distinct geometry can be recognized in the upper part of the Talchir Formation (Lower Permian) of Jharia Basin, India. These folds, on systematic examination, indicate some events of progressive deformation. Experimental study reveals that if a layered stack of clay and overlying sand is allowed to flow slowly down a slope, differential velocity due to viscosity contrast leads to the deformation of the rheologic interface. The sharp planar contact gradually becomes wavy leading to the development of round-hinged folds involving sediments adjacent to it. With the advancement of the flow these folds gradually become overturned with the rotation of the axial plane in the direction of flow. Computer simulation suggests that progressive deformation of these folds by simple shearing may lead to the formation of tight isoclinal folds, which on dislocation along intrastratal normal faults may lead to the development of rootless isoclinal folds. The sheath folds observed in the studied section also indicate accentuation of the curved hinge due to simple shearing. The spatial distribution of these fold types in conjunction with the inferred direction of progressive deformation indicate basinward translation of the slump slice. If the same stack of sediments rapidly flows down the slope, the waveform generated at the interface quickly breaks in the form of roll-up recumbent fold due to Kelvin–Helmholtz instability.     

饱和粉砂不稳定性的试验研究

通过对净砂和级配良好粉砂(含10 %粉土)进行一系列三轴固结不排水试验（CU）,研究了粉土、孔隙比和围压对饱和粉砂不稳定性的影响。试验结果表明,净砂与粉砂在不排水剪切条件下均会出现应变软化现象（即不稳定性）。同一围压下脆性指数(IB)随孔隙比增加,但不稳定线的应力比随孔隙比增加而减小。引用等效粒间孔隙比(ege)后,净砂和粉砂在ege-ln p?平面上拥有基本相同的临界状态线。在临界状态理论及等效粒间孔隙比的基础上,提出在同一修正状态参数(?ge)下净砂和级配良好粉砂有相似的不稳定性。     

Measurements of higher harmonic wave forces on a vertical truncated circular cylinder

Wave forces on a vertical truncated circular cylinder in Stokes waves with the wave slopes ranging from 0.06 to 0.24, are measured in a wave tank. The higher harmonic wave forces are compared with the available values from theories of the FNV (Faltisen–Newman–Vinje) model and Varyani solution. The first harmonic horizontal forces measured are much larger than the theoretical values from the FNV model, while the first harmonic vertical forces are well predicted by the Varyani theory. It was also found that the FNV model significantly overpredicts the second harmonic horizontal forces in high frequency waves, but under predicts the third harmonic forces. The differences between the actual measurement and the theory, in the second and third harmonic horizontal forces, become smaller at low wave frequencies as the wave slope increases. In addition, the transverse instabilities in the incoming waves with high wave slope were observed, which is due to the nonlinear modulation. Measurements were, thus, carried out before the instability occurred.     

Instability analysis of three-dimensional ocean shear waves

Ｉｎｓｔａｂｉｌｉｔｙａｎａｌｙｓｉｓｏｆｔｈｒｅｅ－ｄｉｍｅｎｓｉｏｎａｌｏｃｅａｎｓｈｅａｒｗａｖｅｓ￥ＱｉａｏＦａｎｇｌｉ（ＲｅｃｅｉｖｅｄＮｏｖｅｍｂｅｒ６，１９９５，ａｃｃｅｐｔｅｄＮｏｖｅｍｂｅｒ３０．１９９５）Ａｂｓｔｒａｃｔ：Ｂａｓｅ...     

On the physical model of earthquake precursor fields and the mechanism of precursors＇timespace distribution──origin and evidences of the strong body earthquake──generating model

Ｏｎｔｈｅｐｈｙｓｉｃａｌｍｏｄｅｌｏｆｅａｒｔｈｑｕａｋｅｐｒｅｃｕｒｓｏｒｆｉｅｌｄｓａｎｄｔｈｅｍｅｃｈａｎｉｓｍｏｆｐｒｅｃｕｒｓｏｒｓ＇ｔｉｍｅｓｐａｃｅｄｉｓｔｒｉｂｕｔｉｏｎ──ｏｒｉｇｉｎａｎｄｅｖｉｄｅｎｃｅｓｏｆ　ｔｈｅｓｔｒｏｎ...     

单一滑面边坡的非稳定蠕变模型分析

对单一滑面边坡的非稳定蠕变分析是边坡稳定性研究的基础。文中对岩质边坡单一滑面的流变变形机制进行了分析，提出了一种能较好反映这一变形机制的非稳定蠕变模型。特别是描述单一滑面边坡的非稳定蠕变破坏阶段，并对其稳定性进行了讨论。结合一些工程实例进行了对比验证，为滑坡灾害的预测和防治提供依据。     

Phillips模式的斜压不稳定的非线性饱和问题:能量情形

A conservation law for the Phillips model is derived. Using this law, the nonlinear saturation of purely baroclinic instability caused by the vertical velocity shear of the basic flow in the Phillips model-the case of energy-is studied within the context of Arnold's second stability theorem. Analytic upper bounds on the energy of wavy disturbances are obtained. For one unstable region in the parameter plane, the result here is a second-order correction in ε to Shepherd's; For another unstable region, the analytic upper bound on the energy of wavy disturbances offers an effective constraint on wavy (nonzonal) disturbances φ'i at any time.     

The influence of the coast on the dynamics of upwelling fronts: Part II. Numerical simulations

We investigated the dynamics of upwelling fronts near a coast. This work was first motivated by laboratory experiments [Bouruet-Aubertot, Linden, Dyn. Atmos. Oceans, 2002] in which the front is produced by the adjustment of a buoyant fluid initially confined within a bottomless cylinder. It was shown that cyclonic eddies consisting of coastal waters are enhanced when the front is unstable near the coast (the outer vertical boundary). The purpose of this paper is to provide further insights into this process. We reproduced the experimental configuration using a three-dimensional model of the primitive equations. We first show that for coastal fronts more potential energy, in terms of the maximum available potential energy, is released than for open-ocean fronts. Therefore, waves of larger amplitude are generated during the adjustment and the mean flow that establishes has a higher kinetic energy in the former case. Then as baroclinic instability starts and wave crests reach the boundary, cyclonic eddies are enhanced as in the laboratory experiments and in a similar way. However, in contrast to the laboratory experiments, offshore advection of cyclonic eddies can occur in two stages, depending on the spatial organization of the baroclinic wave. When the baroclinic wave consists of the sum of different modes and is thus highly asymmetric, the offshore advection of cyclonic eddies occurs just after their enhancement at the boundary, as in the laboratory experiments. By contrast, when a single-mode baroclinic wave develops, neighboring cyclonic eddies first merge before being advected offshore. Very different behavior is observed for open-ocean fronts. First a mixed baroclinic–barotropic instability grows. Then the eddies transfer their energy to the mean flow and the barotropic and baroclinic instabilities start again. An excellent agreement is obtained with the main result obtained in the laboratory experiments: the ratio between growth rates of surface cyclonic and anticyclonic vorticity increases as the instability develops nearer to the coast.