Damage Detection Methods for Offshore Platforms Based on Wavelet Packet Transform

1 .IntroductionInthe whole service period of the platforms ,some damage is unavoidable due to the corrosion,impact ,fatigue and so on.The damage whould cause the structures’ultimate capacity and safety de-crease .Presently,it is generally acceptedthat the detection of damage involes considerable statisticaluncertainties,thus lot of efforts is made for the damage probalility model ,for example Song and Lu(1996) usedthefuzzy-settheoryto estimatethe humanerrorsthroughthe definitionof inspection…     

基于小波变换与滤波的DEM简化方法

针对现有3维地形模型简化方法中的不足,提出了一种基于小波变换与滤波的规则格网简化方法。同时还在大量实验的基础上,给出了一般情况下需要的变换层数,分析了滤波门限与简化效果之间的关系。这里的研究不仅为3维地形的多分辨率合理建模与精度评估提供了理论和方法,而且也为今后开展类似研究及进行建模质量控制提供了科学的依据。     

基于小波变换的单频GPS快速精密定位整周模糊度的解算

对于GPS短基线,载波相位双差观测量已基本消除了卫星轨道误差、钟差、大气折射误差等系统偏差的影响,主要包含距离观测量信息及随机测量误差,其中测量误差是高频的测量噪声,小波变换可将GPS载波相位双差观测量中的观测噪声(高频部分)分解出来。本文利用Coiflets小波基函数对GPS快速定位的原始载波相位双差观测量进行5层分解,通过重构第5层低频系数获得去除噪声的"干净"的载波相位双差观测量,然后利用"干净"的双差观测量进行最小二乘参数估计,以减小测量噪声对GPS快速定位病态方程解的扰动。计算结果表明该方法能够显著提高GPS快速定位中模糊度浮点解的精度,仅利用几个观测历元的数据就可以准确地固定模糊度。     

ASTER多光谱波段与SPOT全色波段融合方法研究

遥感图像融合可以发挥多源遥感数据的优势。但由于不同传感器的遥感数据有着不同的特征,不同数据所采用的融合方法也应不同。文章探讨了ASTER多光谱波段与SPOT全色波段数据融合的方法,通过对PCA融合、IHS融合和基于小波的IHS融合方法的对比研究,得出基于小波的IHS融合法在提高空间分辨率的同时较好地保持了地物的多光谱信息。     

小波变换在遥感图像上矿区空间定位方面的分析与应用——以鄂东南铁矿矿区为例

随着社会的发展,人们对自然地物的影响越来越显著,大量地改变了地表的状况,在遥感图像上则表现为灰度值变化剧烈,其中的纹理信息发生改变.在频率域上说,人工改变的区域部分的高频成分比其他区域部分要丰富很多,小波变换能够有效地将其中的高频信息提取出来,用假彩色分割图将其中的异常值明显地表示出来.湖北大冶的铁山矿区分布着六大露天矿区,地表开挖范围广,影响程度大,以该地区为例,分析小波变换在遥感图像上矿区空间定位方面的应用.使用本文介绍的方法处理效果比较明显.矿区位置的确定还需要参考断层分布信息,这意味着使用小波变换进行处理的方法具有一定的局限性.     

DCT域遥感影像融合算法

提出一种基于离散余弦变换(Discrete Cosine Transform,DCT)与IHS变换的多光谱与全色遥感影像融合方法及其改进算法。本文方法依据DCT系数的特点在DCT域进行遥感影像融合,适合压缩格式的遥感影像快速融合。目视效果与客观评价表明,相比常用遥感影像融合方法,本文方法能在提高空间分辨率与保持光谱特性之间得到更好的折衷。     

小波边缘分析建模波阻抗反演方法在煤层解释中的应用

受限于地震波主波长的1／4,常规地震处理难以分辨较薄煤层。基于模型的波阻抗反演虽然克服了厚、薄煤层计算问题．但因难以得到准确的高频部分,很多情况下反演结果的精度和分辨率往往不能满足地质预测的要求。小波边缘分析建模波阻抗反演方法是从地震数据中提取地震特征参数,用于建模并参与迭代反演。该方法即可以弥补反演过程中高频成分的误差,减少对钻井数据的依赖程度,得到较为合理的初始模型,又可提高反演的精度和分辨率．使反演结果更好的反映实际地下地质情况。利用该方法,对大井-将军庙及新疆红沙泉2个勘探区的侏罗系中统西山窑组含煤地层进行波阻抗反演,反演结果与钻井资料进行比较,其中大井一将军庙0802及0809号孔单煤层厚度误差分别为3％、8％．新疆红沙泉多煤层厚度及煤层之间的夹层厚度预测结果除B6煤层误差较大外,其它误差均小于7％．可见该反演方法的计算结果比较准确。     

A comparison between 2D and 3D wavelet analysis method for asteroid family dynamical study

As found in previous studies (Bendjoyaet al. 1991) the wavelet analysis is a reliable tool for the determination of asteroid families. A comparison between the 2D and a newly developed 3D wavelet analysis is performed on 14 fictitious families numerically generated the members of which area priori known. It clearly appears that the 3D method brings improvements to the 2D approach. Indeed the 3D analysis appears well suited for all cases even for those corresponding to the very dense Flora region and for exotic families such as filamentar ones. With the 2D method, satisfying results are obtained for the simulations which correspond to 70% of the real asteroid families previously found. The aim of this paper is to show quantitatively the improvement of the 3D method versus the 2D one.     

Comparison of methods to model the gravitational gradients from topographic data bases

A number of methods have been developed over the last few decades to model the gravitational gradients using digital elevation data. All methods are based on second-order derivatives of the Newtonian mass integral for the gravitational potential. Foremost are algorithms that divide the topographic masses into prisms or more general polyhedra and sum the corresponding gradient contributions. Other methods are designed for computational speed and make use of the fast Fourier transform (FFT), require a regular rectangular grid of data, and yield gradients on the entire grid, but only at constant altitude. We add to these the ordinary numerical integration (in horizontal coordinates) of the gradient integrals. In total we compare two prism, two FFT and two ordinary numerical integration methods using 1" elevation data in two topographic regimes (rough and moderate terrain). Prism methods depend on the type of finite elements that are generated with the elevation data; in particular, alternative triangulations can yield significant differences in the gradients (up to tens of Eötvös). The FFT methods depend on a series development of the topographic heights, requiring terms up to 14th order in rough terrain; and, one popular method has significant bias errors (e.g. 13 Eötvös in the vertical–vertical gradient) embedded in its practical realization. The straightforward numerical integrations, whether on a rectangular or triangulated grid, yield sub-Eötvös differences in the gradients when compared to the other methods (except near the edges of the integration area) and they are as efficient computationally as the finite element methods.     

地震信号的相位恢复及误差分析

常见的几种地震子波有:零相位子波、最小相位子波、最大相位子波和混合相位子波。以不同类型的信号为激发子波,对不同地层模型合成地震道。仅用原始合成地震道记录的振幅谱来恢复原始记录,讨论不同方法下,由于激发子波的不同,对比分析原始记录与恢复记录的差异,及其恢复效果。