智能照明系统在现代建筑照明中的应用研究

在对传统照明系统和智能照明系统进行对比分析的基础上,剖析了智能照明系统的控制策略,并结合实际的工程应用,着重讨论了基于ABB I-Bus产品的智能照明控制系统的实现,结果表明该系统具有高效、便捷、节约能源等优点.同时,还对系统与建筑物楼宇自控系统问的系统集成方式进行了研究.     

Design of a high update-rate star sensor for arcsec-level attitude determination from balloon-borne X/γ astronomy platforms

This paper describes the design of a star sensor based upon a high dynamic range CCD in order to reach an arcsec-level attitude determination in balloon-borne missions. A custom star identification software was developed and laboratory-tested on a prototype assembled using commercial components. A set of numerical simulations have been carried out to study the dependence on the pointing precision of the centroid position accuracy, the number of detected stars and the effect of the image focusing. Moreover, the role of the electronic noise and the discrete pixel structure on the light signals is identified by the analysis of numerical simulations. Laboratory tests confirm that the arcsec pointing accuracy with a 1 Hz update rate can be achieved with our combination of custom-developed software and selected hardware components.     

Is Precipitation the Dominant Controlling Factor of High Inorganic Nitrogen Content in the Changjiang River and Its Mouth？

The main reasons for the high content of inorganic N and its increase by several times in the Changjiang River and its mouth during the last 40 years were analysed in this work. The inorganic N in precipitation in the Changjiang River catchment mainly comes from gaseous loss of fertilizer N, N resulting from the increases of population and livestock, and from high temperature combustions of fossil fuels. N from precipitation is the first N source in the Changjiang River water and the only direct cause of high content of inorganic N in the Changjiang River and its mouth. The lost N in gaseous form and from agriculture non-point sources fertilizer comprised about 60% of annual consumption of fertilizer N in the Changjiang River catchment and were key factors controlling the high content of inorganic N in the Changjiang River mouth. The fate of the N in precipitation and other N sources in the Changjiang River catchment are also discussed in this paper.     

模糊PID控制器在水压机控制系统中的应用

介绍了模糊控制中的设计思想及方法，并采用模糊控制的方法来改进实际生产中PID控制的一些控制难点。将改进方法应用在一大型水压机控制系统中并在实际生产中取得了理想效果。     

Seismic rays in an ellipsoidal earth model: theoretical analysis and estimation of deviations due to the ellipticity

Summary. A first-order form of the Euler's equations for rays in an ellipsoidal model of the Earth is obtained. The conditions affecting the velocity law for a monotonic increase, with respect to the arc length, in the angular distance to the epicentre, and in the angle of incidence, are the same in the ellipsoidal and spherical models. It is therefore possible to trace rays and to compute travel times directly in an ellipsoidal earth as in the spherical model. Thus comparison with the rays of the same coordinates in a spherical earth provides an estimate of the various deviations of these rays due to the Earth's flattening, and the corresponding travel-time differences, for mantle P -waves and for shallow earthquakes. All these deviations are functions both of the latitude and of the epicentral distance. The difference in the distance to the Earth's centre at points with the same geocentric latitude on rays in the ellipsoidal and in the spherical model may reach several kilometres. Directly related to the deformation of the isovelocity surfaces, this difference is the only cause of significant perturbation in travel times. Other differences, such as that corresponding to the ray torsion, are of the first order in ellipticity, and may exceed 1 km. They induce only small differences in travel time, less than 0.01s. Thus, we show that the ellipticity correction obtained by Jeffreys (1935) and Bullen (1937) by a perturbational method can be recovered by a direct evaluation of the travel times in an ellipsoidal model of the Earth. Moreover, as stated by Dziewonski & Gilbert (1976), we verify the non-dependence of this correction on the choice of the velocity law.     

单片机在卫星天线控制系统中的应用

主要介绍卫星天线控制系统中天线旋转定位控制的软硬件设计和实现。该部分的主要功能是：接收红外遥控器的信号；检测前面板上的按键信号；检测传感器反馈的信号；根据所得信号作出相应的动作。     

密度和压缩系数的散射层析成像法

本文在速度成像的基础上研究了同时对密度和压缩系数成像的散射波层析成像法.对不同散射角度的计算可以得到一系列反演图像,拟合这些图像,从而可以有效地达到对密度和压缩系数（或速度）成像的目的.与单纯的速度成像相比,增加了反演的难度.首先是对资料的方位性要求增加;其次是对资料的利用率下降.即便如此,从对较少量的炮点和检波点资料的数值计算来看,仍取得了满意的成像结果.我们对组成字母“A”的散射体结构进行了成像计算,结果能够同时再现密度和压缩系数,成像清晰,表明了方法的可行性,并能应用于复杂结构的成像问题.     

青藏高原及邻近区域的S波三维速度结构

本文收集了WWSSN台网和我国台网中13个地震台站的长周期地震记录,用140条10-90s瑞利波频散曲线和作者提出的Tarantola-Backus面波频散层析成象方法,作了青藏高原及邻区的速度反演,得出该地区岩石层速度结构的三维图象.结果表明,1.在10-110km深度范围内,速度结构出现与大地构造特征相关的分区性,显示出四个构造单元:青藏块体、柴达木-巴颜喀拉-三江块体、塔里木块体和印度块体.2.高原内部,深度为10-70km内速度较低,莫霍界面呈不对称盆形分布,藏北那曲附近地壳厚度超过70km,高原边缘壳厚为45-50km,90-110km为高速异常,表明高原内部存在上地幔盖层.3.高原北部的班公湖断裂和东部的三江断裂系是该区重要的分界线,是岩石层结构存在明显差异的重要接触部位,可能是冈瓦纳古陆与欧亚古陆的缝合带.4.柴达木-巴颜喀拉-三江块体内部速度分布不均匀,地壳厚度由北向南从45km加深到60km;在深度90-110km存在一低速层.5.塔里木地块内速度随深度均匀增加,从地壳到上地幔110km内没有发现低速层.地壳厚度约50km.     

论裸眼井中的“共振纵波”和“共振横波”

一、引言 文献[1]和[2]指出,充流体裸眼井中存在频率确定、波速恒定、且沿传播方向不衰减的“共振纵波”和“共振横波”。本文的目的在于论证并指出,这两种波是不存在的。 二、论证 设一点源位于z=0的井轴上,则井轴上z处的声波频率响应为     

扬子及周缘地区上奥陶统-下志留统烃源岩发育环境及其控制因素

扬子地区下古生界发育了上奥陶统五峰组和下志留统龙马溪组两套有效烃源岩,查清其发育环境及其控制因素具有重要的科学理论和油气勘探意义.晚奥陶世开始,扬子地区进入碎屑岩陆棚演化阶段;五峰期-龙马溪期,扬子地区主体为局限的深水陆棚环境,总体呈现出浅水陆棚、深水陆棚、次深海共存的古地理格局.沉积体系展布和沉积演化主要受扬子陆块与华夏陆块的汇聚作用控制.扬子地区上奥陶统-下志留统烃源岩的形成与生烃母质生物的高生产力和高埋藏率、冰期-冰后期之交的气温快速转暖、海平面快速上升以及粘土矿物在有机质富集保存过程中的赋存驻留作用等密切相关.