Rainfall effect on wind waves and the turbulence beneath air-sea interface

Rainfall effects on wind waves and turbulence are investigated through the laboratory experiments in a large wind-wave tank. It is found that the wind waves are damped as a whole at low wind speeds, but are enhanced at high wind speeds. This dual effect of rain on the wind waves increases with the increase of rain rate, while the influence of rainfall-area length is not observable. At the low wind speed, the corresponding turbulence in terms of the turbulent kinetic energy （TKE） dissipation rate is significantly enhanced by rain- fall as the waves are damped severely. At the high wind speed, the augment of the TKE dissipation rate is suppressed while the wind waves are enhanced simultaneously. In the field, however, rainfall usually hin- ders the development of waves. In order to explain this contradiction of rainfall effect on waves, a possibility about energy transfer from turbulence to waves in case of the spectral peak of waves overlapping the inertial subrange of turbulence is assumed. It can be applied to interpret the damping phenomenon of gas trans- fer velocity in the laboratory experiments, and the variation of the TKE dissipation rates near sea surface compared with the law of wall.     

The physical simulation of wave groups and their variations in a wave flume

The physical simulation method of wave groups in a wave flume is proposed and verified by the exper- iments. The experimental results demonstrate that random waves with desired wave groupiness, which simultaneously includes the wave group height and length, can be generated satisfactorily at the specified position in a wave flume using the proposed method. Furthermore, the transformation properties of the wave groupiness along the fiat-bottomed wave flume are investigated based on the physically simulated waves. Associated proposals with the physical simulation of wave groups are given.     

Modeling nonlinear wave–wave interactions with the elliptic mild slope equation

An approach is developed to simulate wave–wave interactions using nonlinear elliptic mild-slope equation in domains where wave reflection, refraction, diffraction and breaking effects must also be considered. This involves the construction of an efficient solution procedure including effective boundary treatment, modification of the nonlinear equation to resolve convergence issues, and validation of the overall approach. For solving the second-order boundary-value problem, the Alternating Direction Implicit (ADI) scheme is employed, and the use of approximate boundary conditions is supplemented, for improved accuracy, with internal wave generation method and dissipative sponge layers. The performance of the nonlinear model is investigated for a range of practical wave conditions involving reflection, diffraction and shoaling in the presence of nonlinear wave–wave interactions. In addition, the transformation of a wave spectrum due to nonlinear shoaling and breaking, and nonlinear resonance inside a rectangular harbor are simulated. Numerical calculations are compared with the results from other relevant nonlinear models and experimental data available in literature. Results show that the approach developed here performs reasonably well, and has thus improved the applicability of this class of wave transformation models.     

Simultaneous Ocean Wave Measurements by the Jason and Topex Satellites,with Buoy and Model Comparisons Special Issue: Jason-1 Calibration/Validation

The verification phase of the Jason-1 satellite altimeter mission presents a unique opportunity for comparing near-simultaneous, independent satellite measurements. Here we examine simultaneous significant wave height measurements by the Jason-1 and TOPEX/Poseidon altimeters. These data are also compared with in situ measurements from deep-ocean buoys and with predicted wave heights from the Wave Watch III operational model. The rms difference between Jason and TOPEX wave heights is 28 cm, and this can be lowered by half through improved outlier editing and filtering of high-frequency noise. Noise is slightly larger in the Jason dataset, exceeding TOPEX by about 7 cm rms at frequencies above 0.05 Hz, which is the frequency at which the coherence between TOPEX and Jason measurements drops to zero. Jason wave heights are more prone to outliers, especially during periods of moderate to high backscatter. Buoy comparisons confirm previous reports that TOPEX wave heights are roughly 5% smaller than buoy measurements for waves between 2 and 5 m; Jason heights in general are 3% smaller than TOPEX. Spurious dips in the TOPEX density function for 3- and 6-m waves, a problem that has existed since the beginning of the mission, can be solved by waveform retracking.     

Hydrodynamic Performance of the Arc-Shaped Bottom-Mounted Breakwater

The problem of the hydrodynamic interaction with the arc-shaped bottom-mounted breakwaters is investigated theoretically. The breakwater is assumed to be rigid, thin, impermeable and vertically located in a finite water depth. The fluid domain is divided into two sub-regions of inner and outer by an auxiliary circular interface. Linear theory is assumed and the eigenfunction expansion approach is used to determine the wave field. In order to examine the validity of the theoretical model, the analytical solutions are compared to agree well with published results with the same parameters. Numerical results including wave amplitude, surge pressure, and wave force are presented with different model parameters. The major factors including wave parameters, structure configuration, and water depth that affect the surge pressure, wave forces, and wave amplitudes are discussed and illustrated by some graphs and cloud maps.     

根据漂流浮标资料对黑潮15m层流路及流轴特征的分析

利用1979-02—2012-03共33a的水帆位于15m层的Argos漂流浮标资料,绘制黑潮流系15m层的多年年平均和月平均流场,运用特征线方法计算得到黑潮流轴,定义黑潮流动路径的边界为流速大小20~30cm/s的过渡性区域。结果显示:黑潮多年年平均流路大致是一个以(13°30′N,142°00′E)为圆心、2 235km为半径的直角弧段,其在吕宋海峡、台湾东北、九州西南及伊豆海岭附近海区发生气旋式弯曲前先进行反气旋式弯曲调整,弯曲处出现的路径开口主要是支流的并入或分支的流出;黑潮流轴整体性偏向黑潮左边界,其中在吕宋岛东北至台湾以东海域最为显著,在本州岛以南海域次之,而在东海段基本居中;黑潮流路上的流速在总体上由南向北呈增大趋势,但并非沿流路持续性逐渐增加,而是呈现出较平直流段的大流速区和弯曲调整流段的低流速区相互交错的状况,其中四国岛以南至伊豆诸岛以西流段的流速为最大。多年月平均流场显示,2月,5月,8月和11月这4个月份是黑潮流路和流轴发生变化的重要转折期,而1月,4月,7月和10月这4个月份则是各季节的代表月份。其中,冬季月份的黑潮流路和流轴最为曲折,向边缘海发生显著入侵;夏季月份的黑潮流路和流轴最为平直,左侧伴随有北向流动;春、秋两季的过渡性特征则比较明显。     

波致液化粉质土有效应力变化的试验数据分析

海床不稳定性的现象很多都是海底液化引起的。根据之前的研究,粉土在液化之后有效应力会依然存在,关于波浪作用下海床液化之后有效应力变化的研究很少。采用波浪水槽实验,在未液化和液化2种情况下,分别施加不同波高的波浪,对底床各层位土体孔隙水压力进行采集,并对比研究。实验结果表明,液化后有效应力的相对值相对于液化前有很明显的减小,并且在深度上表现出显著的差异性,这种差异性随着波高的增大而减小。当相同深度处同一种波高作用一定时间时,有效应力会出现极大值,然后有效应力会减小。     

明基床上开孔沉箱垂直力峰值对应的水平力分析

利用水槽二维物理模型对规则波及不规则波作用下明基床上开孔沉箱所受到的波浪力进行了较为系统的试验研究。分析了开孔沉箱总垂直力峰值时刻对应的总水平力与相对基床高度、消浪室相对宽度、波陡、相对水深以及开孔率等影响因素之间的关系,给出了明基床上开孔沉箱总水平力比值(总垂直力峰值时刻对应的总水平力/总水平力峰值)与各影响因素之间的计算关系式。研究成果可供实际工程参考应用。     

基于PIV技术不同形式防波堤周围涡旋场特性研究(英文)

深水防波堤周围流场存在复杂的紊动变化,防波堤较容易发生失效破坏。本文利用PIV技术,基于模型实验,对规则波作用下防波堤周围的速度流场及其涡流特性进行了实验研究,获得了规则波流场的瞬时速度分布。通过对不同型式防波堤在不同的水力条件下的波浪流场实验数据的分析,定量地研究了防波堤堤身水域的涡旋流场的水力特性。     

万米级深海陶瓷耐压结构水下内爆流场数值模拟

耐压结构是深海潜器的重要组成部分,但在深海的高压环境中却存在内爆的风险。为研究陶瓷耐压结构水下内爆的流场特性,使用针对可压缩多相流问题开发的开源代码,采用直接数值模拟,应用自适应直角网格,对两种压力条件下的耐压结构水下内爆进行了数值模拟。通过低压模拟结果与理论解和试验值比较,验证了模拟方法的有效性,进而开展万米级深海陶瓷耐压结构水下内爆模拟。分析发现：陶瓷耐压结构发生内爆后,其内部气腔存在多次压缩—反弹现象,深海环境压力越大则反弹越不明显;气腔反弹阶段,在结构外部将产生数倍于深海环境压力的冲击波,且传播速度接近声速;冲击波压力峰值与到球心距离呈负指数幂函数关系;在相同深海环境压力下,耐压结构外部监测点的冲击波压力与球体半径呈正比例关系。