河南春季一次层状云降水云物理结构分析

河南2000年4月14日的降水由冷锋和西南涡产生，降水云系分布不均匀，云图上云区间有带状云隙，雷达回波图上出现两条带状回波，云带内部分布也不均匀，垂直方向上降水云系有分层现象。分析了降水云系的微物理特征，根据可播度的PMS指标确定了航线上过冷水丰富的区域，结合卫星、雷达资料讨论了过冷水丰富区域的分布特征，还讨论了降水云系内部存在的对流不稳定。     

东风波诱生低涡发生发展的螺旋度演变特征分析

利用NCEP 1°×1°再分析资料对2001年8月3~4日浙南闽北的东风波暴雨过程,根据螺旋度(Helicity)分析了过程中的暴雨演变以及雁荡山脉诱生中尺度低涡发生发展的原因。同时,利用中尺度有限区域模式MM5V2对该东风波诱生中尺度低涡进行模拟。结果表明:螺旋度大值中心强度和位置的演变较好地反映了暴雨落区和中尺度低涡的诱生、移动,螺旋度的时空演变对暴雨发生有一定的预示意义,螺旋度计算较中尺度模式得出诱生低涡初生位置、路径预报准确率高,二者集成可以提高诱生低涡的预报准确率。     

高原低涡移出高原的观测事实分析

应用天气学、统计学原理,结合TRMM资料,分析了1998—2004年5—9月移出高原的低涡的活动特征。结果指出:6—8月是高原低涡移出高原影响中国东部天气的主要时段,它与高原低涡在高原上的活动特征及西南低涡移出高原特征均不同;移出高原的高原低涡的涡源主要在曲麻莱附近、德格附近,这与高原上产生低涡的涡源不同;移出高原的高原低涡的移动路径多数是随低槽的活动而向东、向东南移动,这与高原低涡在高原上多数是沿切变线移向东北不同,高原低涡移出高原后,不仅影响中国的范围广,还可能影响到朝鲜半岛、日本;高原低涡移出高原后涡的强度、性质会有变化,在高原以东活动时间长(≥36 h)的高原低涡,移出高原前多数为暖性低涡,移出高原后多数为斜压性低涡,低涡加强、多数可产生暴雨、大暴雨;高原低涡移出高原后移到海洋上,往往因下垫面不同而变化,出海后都有降水加强、多数位势高度下降的现象;移出高原后的高原低涡因东面海上热带气旋活动而少动,与其南面热带气旋活动相向而行,因季风低压少动而少动的现象。     

Inertial theory of the mean Hadley circulation under the condition of nonstatic equilibrium

1 Introduction The mean meridional circulation plays an important role in the transportation and balance of heat, momen- tum, vortex and vapor between different latitudes. According to the data analysis, there are three circula- tions from the equator to the polar area: the Hadley circulation, a heat-driven circulation which rises around the equator and sinks at a certain latitude; the subpolar circulation, another heat-driven circulation around the polar area; and the Ferrel circulation, an i…     

Thermal regimes and degradation modes of permafrost along the Qinghai-Tibet Highway

Permafrost on the Qinghai-Tibet Plateau (QTP) is widespread, thin, and thermally unstable. Under a warming climate during the past few decades, it has been degrading extensively with generally rising ground temperatures, the deepening of the maximum summer thaw, and with lessening of the winter frost penetration. The permafrost has degraded downward, upward and laterally. Permafrost has thinned or, in some areas, has totally disappeared. The modes of permafrost degradation have great significance in geocryology, in cold regions engineering and in cold regions environmental management. Permafrost in the interior of the QTP is well represented along the Qing-hai-Tibet Highway (QTH), which crosses the Plateau through north to south and traverses 560 km of permafrost-impacted ground. Horizontally, the degradation of permafrost occurs more visibly in the sporadic permafrost zone in the vicinity of the lower limit of permafrost (LLP), along the margins of taliks, and around permafrost islands. Downward degradation develops when the maximum depth of seasonal thaw exceeds the maximum depth of seasonal frost, and it generally results in the formation of a layered talik disconnecting the permafrost from the seasonal frost layer. The downward degrada- tion is divided into four stages: 1) initial degradation, 2) accelerated degradation, 3) layered talik and 4) finally the conversion of permafrost to seasonally frozen ground (SFG). The upward degradation occurs when the geothermal gradient in permafrost drops to less than the geothermal gradients in the underlying thawed soil layers. Three types of permafrost temperature curves (stable, degrading, and phase-changing transitory permafrost) illustrate these modes. Although strong differentiations in local conditions and permafrost types exist, the various combinations of the three degradation modes will ultimately transform permafrost into SFG. Along the QTH, the downward degradation has been proceeding at annual rates of 6 to 25 cm, upward degradation at 12 to 30 cm, and lateral degradation in the sporadic permafrost zone at 62 to 94 cm during the last quarter century. These rates exceed the 4 cm per year for the past 20 years reported for the discontinuous permafrost zone in subarctic Alaska, the 3 to 7 cm per year reported in Mongolia, and that of the thaw-stable permafrost in subarctic Yakutia and Arctic Alaska.     

COMPARISON OF ON-LINE COUPLED AND CONSTANT TRANSFER SIMULATION METHODS FOR DIRECT RADIATIVE FORCING OF ANTHROPOGENIC SULFATE

1 INTRODUCTION Of three main methods for studying the radiative forcing of anthropogenic sulfate and climatic response on the regional scale, the first is, with given rates for transforming SO2 to sulfate, converting actually released SO2 into sulfate and acquiring the distribution of sulfate by computing transfer equations in the climate model.     

Aggregate production: Fines generation during rock crushing

The energy required to crush rocks is proportional to the amount of new surface area that is created; hence, a very important percentage of the energy consumed to produce construction aggregates is spent in producing non-commercial fines. Data gathered during visits to quarries, an extensive survey and laboratory experiments are used to explore the role of mineralogy and fracture mode in fines production during the crushing of single aggregates and aggregates within granular packs. Results show that particle-level loading conditions determine the failure mode, resulting particle shape and fines generation. Point loading (both single particles and grains in loose packings) produces clean fractures and a small percentage of fines. In choked operations, high inter-particle coordination controls particle-level loading conditions, causes micro-fractures on new aggregate faces and generates a large amount of fines. The generation of fines increases when shear is imposed during crushing. Aggregates produced in current crushing operations show the effects of multiple loading conditions and fracture modes. Results support the producers' empirical observations that the desired cubicity of aggregates is obtained at the expense of increased fines generation when standard equipment is used.     

基于BGM的不同繁殖长度对集合预报的影响

利用T63L9全球谱模式和NCEP/NCAR再分析资料, 对BGM方法中增长模的繁殖长度对集合预报效果的影响进行研究。结果表明:与控制预报相比, 不同繁殖长度的集合预报都能使预报效果得到一定程度的改进, 特别是第4天预报以后, 改进程度随预报时效而稳步提高。三组不同繁殖长度的集合预报对控制预报的改进存在差别, 分析结果表明:繁殖长度为2 d的集合预报明显效果最差, 而繁殖3 d和4 d的集合预报差别并不明显。对集合Talagrand分布以及离散度的初步分析表明, 繁殖长度取为3 d似乎最为合理。