高精度磁测在IOCG型铁矿勘查中的应用——以智利英格瓦塞铁矿为例

IOCG型（铁氧化物铜金型）矿床富含铁氧化物,且常缺失硫化物,高精度磁测是寻找IOCG矿床重要的有效手段之一。英格瓦塞铁矿位于智利中北部IOCG型矿床成矿带,前期地质工作程度较低。在智利英格瓦塞铁矿矿区地质特征调查基础上,重点针对中部矿区的7个磁异常区,利用RGIS对其高精度磁测数据进行面积上延、面积下延、剖面下延及2.5D反演拟合处理,结果表明,本区引起磁异常的磁性地质体整体呈NE向延伸、倾向NW、倾角较陡。除Ⅰ号和Ⅴ号磁异常规模较小外,其他几个磁异常中心找矿前景较大,有规模的磁异常区大多埋深在50~120 m之间,为下一步地质找矿钻探验证提供了有效的基础。同时,该勘查方法可为中国IOCG型铁矿找矿工作提供参考依据。     

掘进工作面前方煤层底板高程动态预测的试验研究

快速掘进急需构建掘进前方高精度二维地质模型。以沁水煤田某矿区XY-S工作面为例,基于三维地震解释成果,利用巷道掘进过程中煤层底板高程实测信息,动态刷新三维地震平均速度场,更新掘进前方煤层底板高程,最后对掘进前方预测的精度进行统计分析。结果表明：通过不断利用掘进实测煤层底板高程,刷新平均速度场,更新掘进前方煤层底板地质剖面,掘进前方煤层底板剖面与实际揭露剖面之间误差逐渐越小,实测点前方25 m和50 m范围的煤层底板高程最小绝对误差可达0.2 m和0.45 m。若实测点数据密度大、分布均匀,预测精度将会进一步得到提高,可为快速掘进提供高精度煤层底板导航数据。     

四川九寨黄龙机场高填方地基变形三维动力分析

四川九寨黄龙机场具有高填方、高地震烈度、高海拔等三高的特点,高填方体地基在地震作用下的动力稳定与变形问题成为该机场需着重考虑的主要工程地质问题之一。在对目前各种动力分析方法研究的基础上,选用快速拉格郎日差分分析(FLAC)程序,对该机场元山子沟段高填方地基在地震作用下的变形规律进行了系统地研究,获得了一些有实际意义的认识。     

基于模型的3D3C采集设计与评价

对目前三维三分量(3D3C)地震勘探数据采集设计的方法进行了系统分析,利用聚焦射束分析技术(CFP),提出了基于模型的3D3C采集设计方法及其评价的参数。从模型出发的设计方法,能够使3D3C的采集结果更加真实可靠。     

地震波形分类技术在地质异常体解释中的应用

地震波形分类技术具有统计地震信号总体变化和反映这种变化分布规律的特点,是地震属性分析技术的重要延伸,在地质异常体解释方面具有良好的应用效果。高密度三维地震资料具有高信噪比,高分辨率和高保真度的特点,尝试利用波形分类技术对高密度三维地震资料反映的煤层赋存状态、岩浆岩侵入区进行预测,并对陷落柱解释方法进行了研究。井下巷道实际揭露和钻孔验证结果表明：波形分类方法解释的地质异常体精度高、圈定范围准确,可以为煤矿安全开采提供精准的地质资料。     

Three-dimensional active earth pressure from cohesive backfills with tensile strength cutoff

Most of previous analyses on the active earth pressure were performed in two-dimensional cases using the Mohr-Coulomb (M-C) failure function to describe the soil strength. However, all failures of retained slopes indicate a somewhat three-dimensional (3D) feature, and the M-C function is found to overestimate the tensile strength of cohesive soil. In this work, a kinematic limit analysis–based approach is developed for computing the 3D active earth pressure resulting from cohesive backfills. The concept of tensile strength cutoff is adopted to implement the reduction or elimination of tensile strength from the strength envelope. An extended 3D horn failure mechanism that is associated with the modified strength envelope is developed to characterize the collapse of retained slopes. The resultant of active earth pressure is evaluated from the work rate balance equation and expressed as an unfactored coefficient. The obtained results indicate that less support provided by the wall is required when allowing the existence of soil cohesion and 3D effects and that eliminating the tensile strength can observably increase the active earth pressure, especially for the backfill with a great level of cohesion.     

A new numerical approach to the hyperstatic reaction method for segmental tunnel linings

This paper proposes a numerical approach to the hyperstatic reaction method (HRM) for the analysis of segmental tunnel linings. The influence of segmental joints has been considered directly using a fixity ratio that is determined on the basis of the rotational stiffness. The parameters necessary for the calculation are presented. A specific implementation has been developed using a FEM framework. This code is able to consider the three‐dimensional (3D) effect of segment joints in successive rings on the tunnel lining behaviour. The present HRM allows one to take an arbitrary distribution of segment joints along the tunnel boundary into consideration. In addition, the rotational stiffness of segment joints has been simulated using nonlinear behaviour, as it is closer to the true behaviour of a joint than linear or bilinear behaviour. The numerical results of three hypotheses on ring interaction, which allow the 3D effect of a segmental tunnel lining to be taken into account, have been compared with data obtained from the shield‐driven tunnel of the Bologna–Florence high‐speed railway line project. The numerical results presented in the paper show that the proposed HRM can be used to effectively estimate the behaviour of a segmental tunnel lining. Copyright © 2014 John Wiley & Sons, Ltd.     

厚碳酸盐岩覆盖区RVSP三维地震勘探应用效果分析

该文以中国南方一厚碳酸盐岩覆盖区的RVSP三维地震勘探实例,对RVSP三维地震勘探观测系统和数据采集参数的确定、地面等效处理和波场分离等关键处理技术及地质效果进行了阐述和分析,说明了RVSP在克服表浅层复杂地质条件及环境条件对资料的影响及提高地震资料的分辨率有其特定的优势,同时也提出了RVSP三维地震在采集和处理过程中的难点。     

利用3S技术及三维激光扫描仪进行耕地损毁勘测

利用RS技术发现耕地损毁,网络RTK测量耕地损毁范围及面积,GIS提取耕地被损毁前的分类面积和等别,以及利用网络RTK配合Maptek I-Site8810三维激光扫描仪重构损毁耕地三维模型。     

真三维立体显示技术在不动产登记统一平台中的应用研究

随着国家不动产统一登记制度的实施,城市房屋、林地、草原、土地等不动产统一整合、调查和管理工作迫在眉睫。基于机载多角度倾斜摄影和激光雷达扫描技术的创新,真三维数据可为不动产登记提供真实统一、高精度、多层次的空间载体,保证了城市不动产登记应用创新和制度创新。