董家山隧道小净距段爆破控制的数值模拟

结合都-汶高速公路董家山隧道小净距段的实际情况,应用数值模拟方法,对小净距段在爆破荷载作用下的相互影响问题进行了研究.结果表明在隧道爆破施工中应对迎爆侧进行重点监控,采用合理的开挖和加固方式将有效降低爆破施工对先建隧道的不利影响.研究结论可为类似小净距段隧道的爆破设计、施工及现场监控量测提供参考.     

The Role of Pre-existing Structures in the Origin, Propagation and Architecture of Faults in the Main Ethiopian Rift

Four major fault systems oriented N–S to NNE–SSW, NE–SW, E–W and NW–SE are identified from Landsat Thematic Mapper (TM) images and a high resolution digital elevation model (DEM) over the Ethiopian Rift Valley and the surrounding plateaus. Most of these faults are the result of Cenozoic - extensional reactivation of pre-existing basement structures. These faults interacted with each other at different geological times under different geodynamic conditions. The Cenozoic interaction under an extensional tectonic regime is the major cause of the actual volcano-tectonic landscape in Ethiopia. The Wonji Fault Belt (WFB), which comprises the N–S to NNE–SSW striking rift floor faults, displays peculiar propagation patterns mainly due to interaction with the other fault systems and the influence of underlying basement structures. The commonly observed patterns are: curvilinear oblique-slip faults forming lip-horsts, sinusoidal faults, intersecting faults and locally splaying faults at their ends. Fault-related open structures such as tail-cracks, releasing bends and extensional relay zones and fault intersections have served as principal eruption sites for monogenetic Plio-Quaternary volcanoes in the Main Ethiopian Rift (MER).     

图像控制点数据库的设计与实现

地面控制点数据是航天航空图像摄影测量几何处理的必需数据。文中首先比较了控制点数据的存储管理方式，即采用文件系统方式与数据库方式的优缺点；接着分析了控制点图像数据的特征，从而提出了图像控制点数据的数据库存储方案，讨论了图像控制点数据库的查询方法；最后结合文中的方法，设计并且实现了一个控制点图像数据库管理与应用实验系统。通过分析认为，建立控制点图像数据库是重复利用控制点资源的有效途径。     

无地面控制GPS辅助光束法区域网平差

介绍了在WGS-84坐标系中进行GPS辅助光束法区域网平差的基本原理以及利用大地水准面拟合方法实施大地高与正常高的变换方法。利用新疆库尔勒地区1：25000和1：50000实际航摄资料验证了理论与程序实现的正确性。试验结果表明，无地面控制GPS辅助光束法区域网平差可用于中小比例尺测图的加密，在WGS-84坐标系中可以获得较高的点定位精度，而在国家80坐标系下，利用大地水；隹面拟合前后的GPS摄站坐标进行GPS辅助光束法区域网平差，加密精度没有明显差异。     

基于EM算法和单幅雷达图像阴影的控制点坡度校正

对在我国现有的条件下进行控制点坡度校正的必要性进行了阐述，并分析了EM算法。根据EM算法以及基于区域增长的余弦散射模型建立了控制点坡度校正模型，并用河北省张北地区的雷达影像进行了实验，取得了较高的精度初值。     

地图扫描数字化的质量分析与评价

通过分析地图扫描数字化的误差因素．运用质量控制图评价学生实验数据质量，能够直观地对学生实验数据做出判断，同时也能比较各个实验小组及班级之间总体实验水平，及时发现实验准备工作中及实验方法本身的有关问题。     

基于扫描矢量化地图数据生产的数据质量控制

概述了基于扫描矢量化GIS数据的生产过程 ,介绍了扫描矢量化质量控制的策略和方法 ,在地图扫描阶段采用栅格图纠正的方法对地图的变形进行纠正 ,以提高矢量化原图的质量 ,在基于扫描矢量化GIS数据的生产过程中 ,可从算法和软件使用工艺方面提高数据的质量     

南方NGS200应用实践中的若干问题

对南方NGS200在工程控制测量领域应用实践中的一些问题作了阐述，提出了一些见解和措施。     

Probabilistic approach for active control of structures: experimental verification

In our previous study (Earthquake Engineering and Structural Dynamics 2003; 32 :2301), we have developed a probabilistic algorithm for active control of structures. In the probabilistic control algorithm, the control force is determined by the probability that the structural energy exceeds a specified target critical energy, and the direction of a control force is determined by the Lyapunov controller design method. In this paper, an experimental verification of the proposed probabilistic control algorithm is presented. A three‐story test structure equipped with an active mass driver (AMD) has been used. The effectiveness of the control algorithm has been examined by exciting the test structure using a sinusoidal signal, a scaled El Centro earthquake and a broadband Gaussian white noise; and, especially, experiments on control have been performed under different conditions to that of system identification in order to prove the stability and robustness of the proposed control algorithm. The experimental results indicate that the probabilistic control algorithm can achieve a significant response reduction under various types of ground excitations even when the modeling error exists. Copyright © 2004 John Wiley & Sons, Ltd.     

Evolutionary aseismic design and retrofit of structures with passive energy dissipation

A new computational framework is developed for the design and retrofit of building structures by considering aseismic design as a complex adaptive process. For the initial phase of the development within this framework, genetic algorithms are employed for the discrete optimization of passively damped structural systems. The passive elements may include metallic plate dampers, viscous fluid dampers and viscoelastic solid dampers. The primary objective is to determine robust designs, including both the non‐linearity of the structural system and the uncertainty of the seismic environment. Within the present paper, this computational design approach is applied to a series of model problems, involving sizing and placement of passive dampers for energy dissipation. In order to facilitate our investigations and provide a baseline for further study, we introduce several simplifications for these initial examples. In particular, we employ deterministic lumped parameter structural models, memoryless fitness function definitions and hypothetical seismic environments. Despite these restrictions, some interesting results are obtained from the simulations and we are able to gain an understanding of the potential for the proposed evolutionary aseismic design methodology. Copyright © 2005 John Wiley & Sons, Ltd.