中国西北内陆盆地水分垂直循环及其生态学意义

中国西北内陆盆地中的地下水系统,对维系其浅表水分、热量、盐分均衡以及地表的生态平衡、土壤的资源属性和局部地域气候相对稳定性具有不可或缺的调节作用,这种调节作用是通过饱和带水、包气带水(土壤水)、近地表大汽水和植物体内水("四水")之间的垂直循环来实现的.目前的相关研究主要侧重于地下水与地表植被类型间对应关系的统计分析,较少涉及水分运移的机制;而以水分垂直循环的动力学机制为研究对象的SPAC系统(土壤-植物-大气连续体),则对地下水的重视程度不够,且存在着尺度转换的困难,更为完整的应该是GSPAC系统(地下水-土壤-植物-大气连续体).干旱区内陆盆地地下水生态效应的研究需要开展以下的工作:"四水"垂直循环的动力学过程与机制研究,尤其是饱水带-包气带界面水、汽、热转化过程的研究;人类活动影响下地下水系统演化特征的研究,它不仅是实现水分垂直循环研究的最终目的——水资源合理开发利用的中间环节,更是将"四水"垂直循环这一微观水文循环过程与区域水文循环过程相结合,实现尺度转化的关键所在.     

应用PIV系统研究横流中近壁水平圆柱绕流旋涡特性

应用粒子图像测速(PIV)系统对横流中近壁水平圆柱绕流进行了试验研究。介绍了试验原理及装置,讨论了试验参数的选取和粒子的跟随性问题。分析了上游来流的流动特性,显示了亚临界雷诺数下间隙比为0.5时圆柱后尾流区旋涡产生、发展和消亡的动态过程,比较了时均流场和瞬时流场旋涡结构。对圆柱尾迹的旋涡脱落特性进行了分析,得出在试验条件下斯特劳哈尔数保持为常数0.2的结论。     

人造热带气旋垂直结构问题初探

在人造热带气旋中引入了倾斜垂直结构，并将其用于西折后9806号热带气旋登陆路径的数值模拟。结果表明：应用该方案所得到的模拟结果优于应用正压结构的人造热带气旋方案的模拟结果要准确。因此，此类热带气旋的预报中，其初始涡旋可采用倾斜垂直结构，从而提出改进热带气旋初始涡旋的一种新思路。若对其作进一步研究、推广，则具有广阔的业务应用前景。     

可控深度电法对水平柱体和垂直界面的计算和实验

球状地球体可控深度电法的效应系数可近似地全面表达可控深度电法和各种效应。通过点源二度体的电算模拟实验，证明了该方法在水平柱状体和地下存在电阻率垂直界面的条件下，也是有效的。     

西南某电站右岸倾坡内夹泥裂隙成因探讨

西南某拟建大型水电站的右岸岩体中存在倾向坡内的夹泥裂隙，通过对其的发育情况以及所处的地质环境进行系统的研究和认真剖析，认为该区内的倾坡内夹泥裂隙的成因并非正常卸荷引起，而是在构造的基础上，穹隆挽近期隆起的结果，为右岸坝肩稳定性评价提供了可靠的依据。     

Tests on low‐ductility RC frames under high‐ and low‐frequency excitations

The response of low‐ductility reinforced concrete (RC) frames, designed typically for a non‐seismic region, subjected to two frequencies of base excitations is studied. Five half‐scaled, two‐bay, two‐storey, RC frames, each approximately 5 m wide by 3.3 m high, were subjected to both horizontal and/or vertical base excitations with a frequency of 40 Hz as well as a lower frequency of about 4 Hz (close to the fundamental frequency) using a shake table. The imposed acceleration amplitude ranged from 0.2 to 1.2g. The test results showed that the response characteristics of the structures differed under high‐ and low‐frequency excitations. The frames were able to sustain high‐frequency excitations without damage but were inadequate for low‐frequency excitations, even though the frames exhibited some ductility. Linear‐elastic time‐history analysis can predict reasonably well the structural response under high‐frequency excitations. As the frames were not designed for seismic loads, the reinforcement detailing may not have been adequate, based on the crack pattern observed. The effect of vertical excitation can cause significant additional forces in the columns and moment reversals in the beams. The ‘strong‐column, weak‐beam’ approach for lateral load RC frame design is supported by experimental observations. Copyright © 2001 John Wiley & Sons, Ltd.     

半无限空间中圆形孔洞周围SH波的散射

建立了求解在含有圆形孔洞的弹性半空间中SH波散射与圆形孔洞附近动应力集中问题的解析方法。利用SH波散射的对称性和多极坐标的方法，构造了一个可以预先满足半空间自由表面上应力自由边界条件的圆形孔洞对SH波散射的波函数。利用这一波函数，则可将该问题转化成对一个圆形孔洞散射的求解问题。该问题的解答最终又可归结为对一组无究代数方程组的求解问题，并可利用截断有限项的方法对其进行计算，最后给出了有关圆形也洞附近动应力集中问题的算例和数值结果，并讨论了波数与圆孔至自由边界距离变化对动应力集中的影响。     

烃类物质微渗漏机制及垂向运移的数值模拟

在前人烃类物质微渗漏机制研究基础上，建立了烃类物质微渗漏的概念模型，并且推导了烃类物质垂向运移的动力学模型。在动力学模型的基础上，通过数值模拟验证了烃类物质胶体气泡上升机制的合理性，并计算了不同情况下烃类物质垂向运移的平衡时间，进一步验证了烃类物质气泡上升机制满足运移速度快、流量少的特点。     

Modelling the effects of temperature and food on individual growth and reproduction of Daphnia and their consequences on the population level

Individual based simulations of population dynamics require the availability of growth models with adequate complexity. For this purpose a simple-to-use model (non-linear multiple regression approach) is presented describing somatic growth and reproduction of Daphnia as a function of time, temperature and food quantity. The model showed a good agreement with published observations of somatic growth (r² = 0.954, n = 88) and egg production (r² = 0.898, n = 35). Temperature is the main determinant of initial somatic growth and food concentration is the main determinant of maximal body length and clutch size. An individual based simulation was used to demonstrate the simultaneous effects of food and temperature on the population level. Evidently, both temperature and food supply affected the population growth rate but at food concentrations above approximately 0.4 mg Cl⁻¹ Scenedesmus acutus temperature appeared as the main determinant of population growth.

Four simulation examples are given to show the wide applicability of the model: (1) analysis of the correlation between population birth rate and somatic growth rate, (2) contribution of egg development time and delayed somatic growth to temperature-effects on population growth, (3) comparison of population birth rate in simulations with constant vs. decreasing size at maturity with declining food concentrations and (4) costs of diel vertical migration. Due to its plausible behaviour over a broad range of temperature (2–20 °C) and food conditions (0.1–4 mg Cl⁻¹) the model can be used as a module for more detailed simulations of Daphnia population dynamics under realistic environmental conditions.