爆破夯实技术在水下地基处理中的应用

以某杂货码头和集装箱重力式码头水下地基处理工程为例，介绍了其地基处理的爆夯试验过程，得出了一次性爆破夯实厚层块石抛石基床的爆夯参数，并对其施工过程进行了监测。总结了类似工程施工的经验与教训。     

Evidence for deep groundwater flow and convective heat transport in mountainous terrain, Delta County, Colorado, USA

The Tongue Creek watershed lies on the south flank of Grand Mesa in western Colorado, USA and is a site with 1.5 km of topographic relief, heat flow of 100 mW/m², thermal conductivity of 3.3 W m^–1 °C^–1, hydraulic conductivity of 10^-8 m/s, a water table that closely follows surface topography, and groundwater temperatures 3–15°C above mean surface temperatures. These data suggest that convective heat transport by groundwater flow has modified the thermal regime of the site. Steady state three-dimensional numerical simulations of heat flow, groundwater flow, and convective transport were used to model these thermal and hydrological data. The simulations provided estimates for the scale of hydraulic conductivity and bedrock base flow discharge within the watershed. The numerical models show that (1) complex three-dimensional flow systems develop with a range of scales from tens of meters to tens of kilometers; (2) mapped springs are frequently found at locations where contours of hydraulic head indicate strong vertical flow at the water table, and; (3) the distribution of groundwater temperatures in water wells as a function of surface elevation is predicted by the model.     

伴随模式同化系统在修正模式地形中的应用

任何模式都只是实际大气的一种近似模拟，存在误差。鉴于传统的四维资料伴随模式同化系统都是假设模式完全正确仅对初始场进行修正。将伴随模式同化系统应用于修正模式地形误差，通过对不同初始地形的修正试验表明，MM5伴随模式同化系统能很好地对地形误差进行修正，能够反演出与初始气象要素场分辨率相匹配、与模式更协调的地形场，为伴随模式同化系统的广泛应用提供了一种新的思路。     

基于DEM的地形简化方法对比分析

地形简化作为一门重要的数据压缩技术已广泛应用于DEM。在大量简化算法中，地形简化指标作为地形简化的核心环节，其好坏直接关系到地形简化的好坏。本文对基于局部误差、曲率和法向量的五个地形简化指标进行了分析评价，用离散的高斯合成曲面来模拟真实DEM，以解析得到的高斯曲率作为地形简化指标“真值”，对比研究了在离散高斯曲面上得到的五个简化指标与解析所得“真值”，通过对各个指标“保特征性”可信度的分析，获得了对这五个指标的整体评价，最后，实例验证了本文结论的正确性。     

A HORIZONTAL 2-D HYDRAULIC NUMERICAL MODEL AND IT’S APPLICATIONS TO FLOOD FORECAST

1 INTRODUCTION There were many flood disasters in China in recent years. When the water level in a river is very high, weak parts of its dike may be destroyed resulted in the submersion of the protected land and properties. It is of significance for decision-makers to exactly predict the processes of flood propagation during flood control. There are many modes of dike bursting, such as seepage destroying by overflow on top of dike caused by dike body sinking induced by piping and soil fl…     

湖泊水下数字高程模型建模方法及应用模型

介绍了当前湖泊水下地形测量的一般方法和作业过程。针对逐点插入构建不规则三角网算法，本文提出了效率改正算法和格网索引号快速计算算法。基于不规则三角网，给出了湖泊水下数字高程模型的一般应用模型——任意点高程计算、填挖方计算模型及等深线计算模型。     

Testing a model for predicting the timing and location of shallow landslide initiation in soil‐mantled landscapes

The growing availability of digital topographic data and the increased reliability of precipitation forecasts invite modelling efforts to predict the timing and location of shallow landslides in hilly and mountainous areas in order to reduce risk to an ever‐expanding human population. Here, we exploit a rare data set to develop and test such a model. In a 1·7 km² catchment a near‐annual aerial photographic coverage records just three single storm events over a 45 year period that produced multiple landslides. Such data enable us to test model performance by running the entire rainfall time series and determine whether just those three storms are correctly detected. To do this, we link a dynamic and spatially distributed shallow subsurface runoff model (similar to TOPMODEL) to an in?nite slope model to predict the spatial distribution of shallow landsliding. The spatial distribution of soil depth, a strong control on local landsliding, is predicted from a process‐based model. Because of its common availability, daily rainfall data were used to drive the model. Topographic data were derived from digitized 1 : 24 000 US Geological Survey contour maps. Analysis of the landslides shows that 97 occurred in 1955, 37 in 1982 and ?ve in 1998, although the heaviest rainfall was in 1982. Furthermore, intensity–duration analysis of available daily and hourly rainfall from the closest raingauges does not discriminate those three storms from others that did not generate failures. We explore the question of whether a mechanistic modelling approach is better able to identify landslide‐producing storms. Landslide and soil production parameters were ?xed from studies elsewhere. Four hydrologic parameters characterizing the saturated hydraulic conductivity of the soil and underlying bedrock and its decline with depth were ?rst calibrated on the 1955 landslide record. Success was characterized as the most number of actual landslides predicted with the least amount of total area predicted to be unstable. Because landslide area was consistently overpredicted, a threshold catchment area of predicted slope instability was used to de?ne whether a rainstorm was a signi?cant landslide producer. Many combinations of the four hydrological parameters performed equally well for the 1955 event, but only one combination successfully identi?ed the 1982 storm as the only landslide‐producing storm during the period 1980–86. Application of this parameter combination to the entire 45 year record successfully identi?ed the three events, but also predicted that two other landslide‐producing events should have occurred. This performance is signi?cantly better than the empirical intensity–duration threshold approach, but requires considerable calibration effort. Overprediction of instability, both for storms that produced landslides and for non‐producing storms, appears to arise from at least four causes: (1) coarse rainfall data time scale and inability to document short rainfall bursts and predict pressure wave response; (2) absence of local rainfall data; (3) legacy effect of previous landslides; and (4) inaccurate topographic and soil property data. Greater resolution of spatial and rainfall data, as well as topographic data, coupled with systematic documentation of landslides to create time series to test models, should lead to signi?cant improvements in shallow landslides forecasting. Copyright © 2003 John Wiley & Sons, Ltd.     

采用Creator生成三维地形

介绍了Creator地形转换的四种算法，讨论了在Creator中生成地形的过程，并以福建省闽清地区水口店为研究区域，建立直观性的、真实性的三维地形。     

深圳市1 km高分辨率厘米级高精度大地水准面的确定

利用65个精度优于2 cm的GPS水准数据、5 213个实测重力点数据、100 m分辨率的数字地形模型和WDM94地球重力场模型,采用移去-恢复技术计算了深圳市1 km分辨率的大地水准面模型.将该模型大地水准面高与由29个GPS水准得到的大地水准面高进行比较,其差值的标准差为±1.4 cm.