华润凤凰城深基坑降水方案设计

降水工程是基坑工程中的一项临时工程,若设计与施工不当易产生流砂、管涌、坑底隆起、边坡失稳、坑壁坍塌等事故。本文针对成都华润凤凰城所在区域地下水的特点,对其深基坑降水采用管井降水方案。经计算,基坑中最大降水点的降深为6．64m,大于设计的6．5m,说明基坑中任意点的降深深度均满足降水设计要求。该方案经济合理,在施工中取得了良好的效果。     

On zero-thickness interface elements for diffusion problems

The present study focuses on the hydraulic behaviour of joints, and, specially, on its numerical implementation in terms of the FEM analysis using a discrete fracture flow approach. Fluid flow through discontinuities has traditionally been modelled using special elements of zero-thickness, which we can classify into single, double and triple-nodded. Single node elements are the simplest and consist of ‘line’ or ‘pipe’ elements which are superimposed onto the standard continuum mesh and that can only model the longitudinal conductivity through the discontinuity. On the other hand, some authors have included the influence of a transversal conductivity, and the subsequent localized potential drop, by using triple node interface elements. In those, the two nodes of the adjacent continuum elements represent the potentials in the pore system on each side of the interface, and a third node in the middle represents the average potential of the fluid in the channel represented by the discontinuity. Finally, double node interface elements have also been proposed, which have the advantage of making it possible to use the same FE mesh for both mechanical and flow analysis. In some cases the influence of a transversal conductivity is not considered and, therefore, although geometrically double-nodded, these elements belong to the single node type and when time comes to solve the system the two nodes must have the same potential, which can only be obtained by the ‘trick’ of prescribing the equivalence of these two d.o.f. before solving the global system of equations. This limitation may, however, be avoided by assuming that the potential in the channel is the average of the two sides of the interface. Based in this simple assumption, an alternative flow interface model has been recently developed and implemented, which preserves both longitudinal and transversal conductivities. An application example is developed and solved with the three types of interfaces described. The results offer useful information regarding the range of applicability and limitations of the new double-nodded interface element proposed. Copyright © 2004 John Wiley & Sons, Ltd.     

广州港新沙港区板桩码头结构设计方案比选分析

介绍了广州港新沙港区板桩码头主要内力计算方法及常用软件,结合设计过程、工程地质情况、现场实际施工情况,着重从受力合理性、施工便利性、节省造价方面,对提出的钢板桩方案、钢管板桩方案进行比较分析,确定了钢管板桩结构更合理,并对优势进行总结。研究表明相对于钢板桩结构,钢管板桩结构在抗弯、抗变形、拉杆拉力和锚碇墙稳定性、对复杂地基(软弱土层较厚、岩层标高较高的地基)适应性、兼顾桩基基础、施工速度等方面更具备优势,且钢管板桩结构可更好的适应码头的大型化和深水化发展,在类似工程设计中可优先采用钢管板桩结构。     

基于软化拉-压杆模型的RC空间边节点抗剪承载力计算方法

实际地震作用是多维的、随机的,框架节点在2个方向同时受力,其抗震能力相比于单向地震作用会降低。目前,对节点核心区在2个方向同时受力时抗剪承载力的研究尚未完善。在双向受力下,节点核心区2个方向传来的剪力形成合剪力作用面,在节点核心区内部形成不同于单向受力下的斜向斜压杆。本文基于软化拉-压杆模型,针对水平双向受力相同的空间边节点,在合剪力作用面内建立抗剪承载力计算模型,确定空间边节点核心区斜压杆以及钢筋拉杆的计算方法。利用有限元软件建立不同参数空间边节点模型,并收集部分空间节点试验数据,将剪力计算值与模拟值或试验值进行对比。结果表明,基于软化拉-压杆模型建立的双向受力下钢筋混凝土框架,其边节点抗剪承载力计算值与模拟值或试验值吻合良好。     

黄土构造节理研究及其应用

作者发现大量不同力学性质的黄土构造节理后，识别了它们的区域性、系统性特征；认定其两组扭裂面代表新构造应力场最大剪切应力方向，利用黄土构造节理系及由其控制的土层沟槽网络恢复了相应地区Q3-4构造应力场；提出构造节理是黄土区地下水运移的主要通道和赋存的场所；发现构造节理是黄土区地裂缝、滑坡、崩塌和水土流失等地质灾害的构造基础之一，证实构造节理是黄土地层的软弱面，风化和继之而来的应力侵蚀就由此开始，进而逐步塑造黄土碟、穴、井、桥、柱、墙、沟等潜蚀地貌和部分侵蚀地貌。研究黄土构造节理对恢复新构造应力场、帮助预测地裂乃至地震活动、控制水土流失和滑塌灾害、进行工程乃至区域稳定性评价、重新认识黄土潜蚀地貌发育规律、指导干旱半干旱黄土区找水，既有理论意义又有实际意义。     

柱状节理岩体原位变形试验力学浅析与模拟

在白鹤滩坝址区柱状节理岩体原位变形试验成果的基础上,针对节理刚度的取值进行讨论,利用柔性中心孔试验值反算得到柱状节理岩体节理面刚度值。岩体变形是由岩块和节理两部分组成,分析含单节理岩体概念模型的单轴加、卸载规律性和其变形特性,发现其滞回特性是节理力学行为造成的;推导得到了岩体变形计算公式,可用于多组相交节理岩体等效弹性模量的计算,能够反映出节理岩体的各向异性特征;建立了柱状节理随机模型,采用离散元方法和反算的刚度值进行了仿真分析,得到等效变形参数在试验结果范围内。     

铸铁管道胶圈承插接口抗震性能试验研究

铸铁管道是城市供水工程常用的管材,其接口的抗震性能是地震多发地区供水管网设计必须考虑的因素之一。为研究胶圈承插接口的力学性能参数,采用了原型拉拔试验,测定了管道胶圈接口拉拔力与接口变形量,通过试验数据分析,证明了胶圈承插接口具有良好的抗震性能,接头最大允许变形量可达3～4 cm,测定出铸铁管胶圈承插接口单位接触面积弹簧系数值在32～125 N/(cm.cm-2)之间、单位接触面积接头最大抗力为45～75 N/cm2。     

玛尔挡改线公路高边坡稳定性分析及生态治理

通过对玛尔挡改线公路高边坡工程地质及水文地质条件调绘探查、岩层节理裂隙统计,采用赤平极射投影法对边坡进行稳定性分析。分析结果显示,高边坡整体处于稳定状态,但如果不采取防护措施,边坡岩土层经过长期的风化剥蚀,边坡局部会逐渐趋于欠稳定状态。根据该地区气候、环境及以往经验,提出采用锚拉式混凝土挡墙结合柔性防护网的生态防护措施对边坡进行防护,实施效果良好。     

节理化岩体复合式滑移破坏的模型试验研究

针对节理化岩体的自身特点,提出沿岩体层面产生的应力集中以及层面与节理之间的残余完整岩桥破坏,将可能导致岩体产生复合式滑移破坏。并在室内利用岩石三轴刚性伺服机,通过模型试验对岩体的层面和一组与层面正交的节理的情况进行模拟研究,分析了结构面性状和围压对复合式滑移破坏的影响,给出了在贯通性结构面(层面)倾角、非贯通性结构面以及围压等因素共同作用下,节理化岩体发生复合式滑移破坏的条件以及破坏面特征。在与前人的试验资料进行对比分析的基础上得到可靠的结论,期望为在将来的实践工作中正确评估节理化岩体的破坏模式提供指导性意见。     

Investigation of natural rock joint roughness

The paper provides a comprehensive review on rock joint roughness measurement and quantification procedures. Superiority of fractal based methods over JRC, statistical parameters and statistical functions in quantifying roughness is discussed in the paper. Two of the best fractal based methodologies available in the literature, the modified 2-D divider and variogram methods, are used to quantify natural rock joint roughness in 3-D and 2-D, respectively. The capability of these two methods in accurate quantification of natural rock joint roughness is shown in the paper by applying the procedures to four natural rock joints. A good comparison has been obtained from the values obtained through the two methods. Both these methodologies have two parameters to capture the stationary roughness. The fractal dimension captures the spatial auto correlation of roughness; the other parameter captures the amplitude of roughness. Anisotropic roughness has been studied by applying two other methodologies: (a) a triangular plate methodology and (b) a light source methodology to the same four natural rock joints. A reasonably good comparison has been obtained through the results of these two methodologies. All four roughness quantification methodologies can be applied to any size of sample covering from laboratory to field scales. The results of the triangular plate and light source methodologies provided possible sliding direction values (under the gravitational loading) close to that reported in the literature for the rough discontinuity planes used in the study.