煤田地质钻探中“真烧假脱断”事故的处理

＂真烧假脱断＂事故在煤田地质钻探施工中比较常见,容易误判为钻具脱扣或折断的烧钻事故。该事故多发生在夜班,以零时至凌晨5时为事故的多发时段;事故产生的主要原因是钻具接箍密封不严,水龙头堵塞,泥浆泵故障和其它因素引起的泥浆不能正常输送到孔底而产生。针对事故的特点,在实践中总结出＂存疑求原、解释合理、逐一破劲、砸反结合＂的处理原则和＂稳、准、静、决＂的处理步骤。郏县王集勘探区某孔和登封某勘探区某孔的处理结果表明,该处理原则和步骤切实可行,对指导同类事故的处理有一定的借鉴意义。     

Paleolatitudes of the Kerguelen hotspot: new paleomagnetic results and dynamic modeling

The Kerguelen Plateau, a Large Igneous Province in the southern Indian Ocean, was formed as a product of the Kerguelen hotspot in several eruptive phases during the last 120 Myr. We obtained new paleolatitudes for the central and northern Kerguelen Plateau from paleomagnetic investigations on basalts, which were drilled during ODP Leg 183 to the Kerguelen Plateau-Broken Ridge. The paleolatitudes coincide with paleolatitudes from previous investigations at the Kerguelen Plateau and Ninetyeast Ridge (the track of the Kerguelen hotspot) and indicate a difference between paleolatitudes and present position at 49°S of the Kerguelen hotspot. We show that true polar wander, the global motion between the mantle and the rotation axis, cannot explain this difference in latitudes. We present numerical model results of plume conduit motion in a large-scale mantle flow and the resulting surface hotspot motion. A large number of models all predict southward motion between 3° and 10° for the Kerguelen hotspot during the last 100 Myr, which is consistent with our paleomagnetic results.     

近岸海域大型水母来源与迁移路径分析——以红沿河电厂海域为例

近岸海域水母暴发可导致滨海火/核电厂取水口堵塞,对电厂安全运行造成潜在威胁。寻找水母源地及其迁移路径是水母治理的基础。本文基于拉格朗日质点追踪方法(LTRANS)建立反向追踪模型,并结合水母生态学特性对2015年6—9月聚集在红沿河电厂海域的大型水母进行溯源,获得水母源地及迁移路径,可以为螅状体栖息地寻找和水母拦截打捞提供依据,对近岸海域水母灾害防治具有重要指导意义。溯源结果表明:(1)红沿河电厂及其邻近海域的水母可能来自多个不同源区,辽东湾西部、北部及电厂南北两侧等海域的水母均有可能迁移至电厂附近;(2)受水温和环流影响,6—9月期间到达电厂附近的水母主要源区及迁移路径不同,早期出现在电厂海域的水母很可能是局地产生的,而7—9月持续的高风险水母灾害则主要取决于渤海不同源区水母的物理聚集;(3)根据水母的主要迁移路径,建议在电厂取水口约15km的海域设置一条封闭监测断面,对水母进行实时监测;在距离取水口约30km的外侧海域设置一条调查断面,于7月初至8月中旬,每5天进行一次定点拖网调查。此外,在距离电厂取水口15—20km的西南方向上,对水母进行拦截打捞可大大降低水母入侵风险。     

Changes in the small-jellyfish community in recent decades in Jiaozhou Bay, China

We used long term monitoring data to evaluate changes in abundance and species dominance of small-jellyfish (collected with zooplankton net whose bell diameter was less than 5 cm) between 1991 and 2009 in the Jiaozhou Bay, China. Zooplankton samples were vertically towed with conical plankton net from near-bottom to surface, identified microscopically, and mapped in time-space using Grapher 7.0 and Surfer 8.0. Results show that the abundance of small-jellyfish throughout the bay had been increasing during 2001-2009 on average of 15.2 ind./m 3 , almost 5 times higher than that between 1991 and 2000. The occurrence of peak abundance shifted from spring to summer after 2000, and two peaks appeared in spring and summer, respectively, after 2005. Both the abundance and the frequency of blooms of small-jellyfish increased after 2000 in the bay. In addition, the biodiversity of jellyfish has increased significantly in recent years with a change in dominant species. Several new dominant species appeared after 2000, including Rathkae octopunctata in winter, Phialidium hemisphaericum in spring, summer, and autumn, Phialucium carolinae in spring, and Pleurobrachia globosa in summer and autumn, while some previous dominant species throughout the 1990s (Eirene ceylonensis, Zanclea costata, Lovenella assimilis, and Muggiaea atlantica) were no longer dominant after 2000. The abundance of small-jellyfish was positively correlated with the density of dinoflagellates, and the abundance of zooplankton. We believe that the changes in smalljellyfish abundance and species composition were the result of eutrophication, aquaculture and coastal construction activities around the bay. Concurrently, seawater warming and salinity decrease in recent decades promoted the growth and reproduction of small-jellyfish in the bay.     

Quantitative prediction of discrete element models on complex loading paths

The ability of discrete element models to describe quantitatively (and not only qualitatively) the constitutive behaviour of a dense sand is assessed in this paper. Two kinds of 3D discrete models are considered. Both consider spheres as elementary particles. Nevertheless, the first model implements a contact law with rolling resistance whereas the second takes into account clumps made of two spheres. The discrete models are calibrated and validated from mechanical tests performed on a dense Hostun sand with a true triaxial apparatus. The calibration is carried out from axisymmetric drained compression tests, while the validation is discussed from monotonic and cyclic stress proportional loading paths and from a circular stress path in the deviatoric stress plane. The quality of the predictions of the discrete models are evaluated by comparison with the predictions given with advanced phenomenological constitutive relations, mainly an incrementally non-linear relation. Predictions given by the discrete models are remarkable, particularly when it is put in perspective with respect to the very few number of mechanical tests required for their calibration. However, these results and conclusions were reached in enabling conditions, and some limitations of such discrete models should be kept in mind.     

GeoSOT-3D椭球体剖分真三维数据表达

随着地球观测技术和信息技术的进步,以全球为背景的科学探索不断增多,不仅是地球表面信息,地下、水下、空中等地球上各个层次的空间信息都受到极大的关注。地球球体剖分网格可以构建真三维的数据模型,进而实现空天地、地下水下一体化的空间数据组织、管理、表达与应用。本文详细论述了GeoSOT-3D椭球体剖分网格的剖分空间框架、剖分编码与剖分尺度特性等理论体系。建立基于GeoSOT-3D的空间对象的真三维表达模型。利用该真三维模型实现了地球椭球体的地上地下可视化,点线面体等空间实体的可视化。研究表明,GeoSOT-3D椭球体剖分具有椭球剖分框架简单、体系完整、二三维一致等特点,因而在该框架下的真三维数据模型可用于下一代地理信息系统中的空间大数据的组织管理与表达。     

无人机遥感真正射影像高精度制图

近年来无人机低空遥感技术不断发展,利用无人机影像生成的真正射影像（TDOM）在成图精度、制作流程方面仍有提高的空间。本文采用固定翼无人机和专业摄影相机采集影像,布设地面控制点,提出了利用运动恢复结构（SfM）和多视立体视觉（MVS）工作流来生成高精度数字表面模型（DSM）和数字正射影像（DOM）的方法;对遮蔽倾斜部分进行阴影检测、DSM修编和多视影像纹理补偿生成TDOM;最后用TDOM上随机分布的检查点进行精度检查,水平精度为3.3 cm,垂直精度为7.5 cm;消除了DOM中倾斜和阴影部分,使建筑物保持垂直视角,生成的满足1：500比例尺高精度并消除倾斜阴影的TDOM可用于农村宅基地确权、国土规划设计等领域。     

Q3砂黄土真三轴强度变形特性研究

为了研究Q3砂黄土强度变形特性,以甘肃永靖黑方台Q3砂黄土为研究对象,利用西安理工大学研制的真三轴仪,进行了3个围压（50、100 kPa 和200 kPa）、3个b值（0、0.25和0.5）和3个含水率（5%、10%和15%）不同工况试样破坏情况的真三轴试验。试验结果发现：（1）真三轴条件下Q3砂黄土剪切破坏方式以侧胀破坏、单缝剪切破坏为主,其次少数土样发生锥形破坏、双缝剪切破坏和T型缝剪切破坏。（2）相同围压和含水率、不同中主应力比（b）的情况下,Q3砂黄土的主应力差随中主应力比增大而增大,应力-应变关系曲线为强硬化型,剪胀现象明显;中主应力比对广义剪应力和广义剪应变之间关系有一定影响,随b值增加,曲线依次增加;随b值的增加,强度降低,广义剪应力与平均球应力比（q/p）与主应变关系曲线逐渐变缓,且曲线依次降低。（3）随含水率增加,Q3砂黄土由固态向半固态转化过程中,不同中主应力比时黏聚力均出现明显降低,但内摩擦角则出现微小增加。     

煤岩水力压裂裂缝扩展形态试验研究

通过室内水力压裂物理模拟试验系统,对大尺寸原煤进行了水力压裂模拟试验,根据水力裂缝的空间展布形态分析了煤岩储层水力裂缝的延伸规律,揭示了网状裂缝的形成机制。结果表明：水力裂缝易在弱层理处分叉和转向,发育的层理和裂缝系统等结构面为压裂形成裂缝网络提供了前提条件。泵压曲线呈现出的频繁波动是煤岩内产生网状裂缝的一个显著特征。水力裂缝的起裂与延伸有4种基本模式,裂缝网络的形成多为这4种基本模式的组合。地应力差异系数和泵注排量对煤层水力裂缝形态有较大影响。较小的地应力差异系数更利于网状裂缝的形成;较高的压裂液排量易形成相对简单的裂缝形态,导致压裂改造效果较差。该试验方法和试验结果可为现场水力压裂参数设计和优化提供参考和依据。