土工带加筋碎石土本构关系的三轴试验研究

通过碎石土和加筋碎石土的大型三轴试验,分析了土工带加筋碎石土的变形特性和土工带加筋对碎石土应力-应变关系的影响,采用双曲线函数拟合加筋土体的应力-应变试验曲线,建立了土工带加筋碎石土的非线性模型以克服经典的刚塑体模型不能反映加筋土体在达到破坏荷载前的变形形态的缺点,提出了土工带加筋土体切线模量的计算公式,该模型能正确反映土工带加筋土体的变形特性,在岩土工程方面有一定的实际应用价值.     

Crustal thickening in an extensional regime: application to the mid-Norwegian Vøring margin

The structure of the mid-Norwegian volcanic Vøring margin at the onset of the Maastrichtian–Paleocene extension phase reflects the cumulative effect of earlier consecutive rifting events. Lateral structural differences present on the margin at that time are a consequence of migration of the location of maximum extension in time between Norway and Greenland. The most important imprints (Moho depth, thermal structure) of these events on the lithosphere are incorporated in a numerical simulation of the final extension phase. We focus on a possible mechanism of formation of the Vøring Marginal High and address the relationship between spatial and temporal evolution of crustal thinning and thickening, uplift of the surface and strength of the lithosphere.It is found that the Vøring Basin formed the strongest part of the margin which explains why the Maastrichtian–Paleocene rift axis was not located here but instead jumped westward with respect to the earlier rift axes locations. The modeling study predicts that local crustal thickening during extension can be expected when large lateral thermal variations are present in the lithosphere at the onset of extension. Negative buoyancy induced by lateral temperature differences increases downwelling adjacent to the rifting zone; convergence of material at the particular part of the margin is mainly taken up by the lower crust. The model shows that during the final phase of extension, the crust in the Vøring Marginal High area was thickened and the surface uplifted. It is likely that this dynamic process and the effects of magmatic intrusions both acted in concert to form the Marginal High.     

A pulsed extension model for the Neogene–Recent E–W-trending Alaşehir Graben and the NE–SW-trending Selendi and Gördes Basins, western Turkey

We have developed a significant body of new field-based evidence relating to the history of crustal extension in western Turkey. We establish that two of the NE–SW-trending basins in this region, the Gördes and Selendi Basins, whose sedimentary successions begin in the early Miocene, are unlikely to relate to late-stage Alpine compressional orogeny or to E–W extension of Tibetan-type grabens as previously suggested. We argue instead that these basins are the result of earlier (?) late Oligocene, low-angle normal faulting that created approximately N–S “scoop-shaped” depressions in which clastic to lacustine and later tuffaceous sediments accumulated during early–mid-Miocene time, separated by elongate structural highs. These basins were later cut by E–W-trending (?) Plio–Quaternary normal faults that post-date accumulation of the Neogene deposits. In addition, we interpret the Alaşehir (Gediz) Graben in terms of two phases of extension, an early phase lasting from the early Miocene to the (?) late Miocene and a young Plio–Quaternary phase that is still active. Taking into account our inferred earlier phase of regional extension, we thus propose a new three-phase “pulsed extension” model for western Turkey. We relate the first two phases to “roll-back” of the south Aegean subduction zone and the third phase to the westward “tectonic escape” of Anatolia.     

Lame surfaces as a generalisation of the triaxial ellipsoid

In modern geodesy the triaxial ellipsoid as a generalisation of the ellipsoid of revolution has a significant position in studying the figure of the Earth. Lame surfaces represent a generalisation of the triaxial ellipsoid. The following paragraphs are devoted to curvatures of the Lame surfaces.     

Causes for continuous siltation of the lower Yellow River

Previous studies indicate that aggradation of a river channel is caused by upriver and/or downriver controls, but the evaluation of their relative importance is often difficult. A method is proposed to isolate the effect of the downriver control based on the slopes of the existing river profile, those of the graded profile estimated from the discharge-sediment relationship and slope reduction due to local base-level rise. The method was applied to the rapidly aggrading lower Yellow River. The downriver control in this case refers to the local base-level rise associated with deltaic extension during the period under discussion. The result shows that the main portion of siltation along the river is not caused by downriver control but by the slope difference between the existing and the graded profiles over a period within the last 700 years, assuming conditions of discharge and sediment load during the period from 1962 to 1985 are reflective of the long term. The marked slope difference between the existing and the graded profiles of the river is a result of changes in the river environment in the past several thousand years including the increase of sediment load, local base-level rise associated with river lengthening by deltaic growth, and relative sea-level rise due to tectonic subsidence of the coastal alluvial plain.     

基于垂直剖面函数的天顶对流层延迟插值算法

通过分析由ERA-Interim气象再分析资料积分方法得到的天顶对流层总延迟随高程变化的规律,提出一种基于垂直剖面函数的天顶对流层延迟(ZTD)插值算法。该算法以ZTD的垂直分布规律为基础,通过垂直剖面函数实现ZTD在高程方向上的精准投影延拓,可以避免因高差较大造成的空间内插结构畸形。采用IGS站提供的高精度对流层产品进行实验验证表明,该算法相对于传统算法能够有效提高ZTD改正值的精度,尤其在高差超过1 km的情况下,相对于反距离加权法精度提升了96%,相对于空间回归法精度提升了79%。     

Integrating isolated and riparian wetland modules in the PHYSITEL/HYDROTEL modelling platform: model performance and diagnosis

Mathematical modelling is a well‐accepted framework to evaluate the effects of wetlands on stream flow and watershed hydrology in general. Although the integration of wetland modules into a distributed hydrological model represents a cost‐effective way to make this assessment, the added value brought by landscape‐specific modules to a model's ability to replicate basic hydrograph characteristics remains unclear. The objectives of this paper were the following: (i) to present the adaptation of PHYSITEL (a geographic information system) to parameterize isolated and riparian wetlands; (ii) to describe the integration of specific isolated wetland and riparian wetland modules into HYDROTEL, a distributed hydrological model; and (iii) to evaluate the performance of the updated modelling platform with respect to the capacity of replicating various hydrograph characteristics. To achieve this, two sets of simulations were performed (with and without wetland modules), and the added value was assessed at three river segments of the Becancour River watershed, Quebec, Canada, using six general goodness‐of‐fit indicators and 14 water flow criteria. A sensitivity analysis of the wetland module parameters was performed to characterize their impact on stream flows of the modelled watershed. Results of this study indicate the following: (i) integration of specific wetland modules can slightly increase the capacity of HYDROTEL to replicate basic hydrograph characteristics; and (ii) the updated modelling platform allows for the explicit assessment of the impact of wetlands (e.g. typology and location) on watershed hydrology. Copyright © 2015 John Wiley & Sons, Ltd.     

内蒙古东乌旗早二叠世超镁铁岩的发现及其构造意义

为研究东乌旗晚古生代地幔性质和造山演化特征,对在东乌旗西部首次发现的超镁铁岩—辉闪橄榄岩进行系统的岩相学和元素地球化学研究。东乌旗辉闪橄榄岩主要由橄榄石、角闪石、斜方辉石及少量斜长石、单斜辉石组成,SiO_2含量介于42.84%~43.96%、MgO(24.10%~26.10%)、Na_2O+K_2O(1.52%~2.32%,小于3.5%),低m/f(3.03~3.54)比值和高FeO~T(12.67%~14.33%)的含量、高Mg~#(76.42~79.20),属铁质超镁铁岩和拉斑玄武岩系列。岩石稀土总量较高(∑REE=39.57×10~(-6)~83.32×10~(-6)),轻稀土(LREE)相对于重稀土(HREE)明显富集[(La/Yb)_N=4.04~7.66],Eu异常不明显(δEu=0.90~0.95),稀土元素球粒陨石标准化配分模式表现为轻稀土相对富集的右倾型。岩石富集大离子亲石元素(LILE)Cs、Rb、Ba、Sr、K等,相对亏损高场强元素(HFSE)Nb、Ta,具明显的Nb、Ta、Ti负异常,而又有别于强烈Nb、Ta亏损的岛弧岩浆岩;相容元素Cr(769×10~(-6)~2480×10~(-6))、Ni(454×10~(-6)~901×10~(-6))含量较高;低Th/U(2.54~3.03)、Nb/U(3.40~12.85)比值和高La/Nb(2.60~3.63)、Ba/Nb(43.11~72.52)、Zr/Y(5.45~7.83)比值。综上,结合区域最新研究成果,我们认为辉闪橄榄岩来源于受俯冲流体交代的尖晶石相地幔橄榄岩部分熔融,上升过程中受地壳物质不同程度的混染,形成于早二叠世板内伸展构造体制,与古亚洲洋闭合之后板内非造山作用有关。这一认识填补了早二叠世幔源岩浆事件和非造山阶段超镁铁质岩石记录的空白。     

The variation of crustal stretching and different modes of rifting along the Australian southern continental margin

The southern margin of Australia is a passive continental margin, formed during a Late Jurassic–Cretaceous rifting phase. The development of this passive margin is mainly associated with extensional processes that caused crustal thinning. In this work, we have measured the amount of extension and the stretching factor (β factor) across seven transect profiles approximately evenly distributed across the margin. The obtained results show that the amount of extension and the β factor along the margin vary from west to east. The lowest amount of extension, low–intermediate β factors and a very narrow margin are observed in the western part with 80 km of extension and is underlain mostly by the Archean Yilgarn Craton and the Albany–Fraser Orogen. The Gawler Craton in the centre of the south Australian margin is another region of low extension and low–intermediate β factor. The largest amount of extension (384 km) and the largest β factor (β = 1.88) are found in the eastern part of the passive margin in an area underlain by Phanerozoic Tasman Orogen units. Our results imply that there is a strong control of the age and thickness of the continental lithosphere on the style of rifting along the Australian passive margin. Rifting of old and cold lithosphere results in a narrow passive margin, with the formation of relatively few faults with relatively wide spacing, while rifting of younger, warmer lithosphere leads to wide rifting that is accommodated by a large number of faults with small spacing.     

湘西地区脉状钨锑金矿床的矿体侧伏与板柱状赋存规律

湘西地区脉状钨锑金矿床矿体严格受构造控制,并普遍具有沿倾向发育较深、侧伏和板柱状赋存的规律。文章阐述了矿体侧伏的控制因素,并以沃溪金矿和泥潭冲金矿为例,分析了褶皱和断裂控制的板柱状矿床(体)的构造特点,总结了矿体板柱状赋存的成因以及矿体侧伏和板柱状赋存的规律,认为应该利用矿体的侧伏和板柱状赋存的规律指导勘查工作。