渤海湾盆地区燕山期构造特征与原型盆地

结合近几年来渤海湾盆地区深层地震勘探与解释的成果，重点论述了渤海湾盆地区燕山期构造特征与盆地原型，提出燕山期构造变形样式总体在纵向上可分为三个构造层，分别称为上部、中部和下部；横向上总体可分为三个构造带，西部为向西逆冲的薄皮逆冲带，中部为冲断—走滑带，东部为厚皮褶皱—冲断带，主体由两期挤压方向皆为NW—SE向的褶皱—逆冲变形形成；并将其演化分为三个阶段：燕山早期、燕山中期和燕山晚期。但是，渤海湾盆地区燕山期的构造变形特征和原型盆地有所变化，其空间上的差异是基底构造格局及其空间差异叠合的结果。综合其它研究结果还表明，渤海湾盆地区燕山期构造是在西太平洋大陆边缘弧的挤压构造背景下，陆内壳下拆沉和壳内挤出逃逸构造的综合动力作用下形成的。     

印尼中加里曼丹波拉湾煤勘探区的构造解析

本文从区域构造背景出发，根据波拉湾煤勘探区地表及钻孔资料综合分析，建立了逆冲断层Ｆ１、Ｆ２及其配套的ｆ１、ｆ２……构造，理顺了错综复杂的构造格局，将推覆构造理论成功地用于援外生产实践。     

The Uplift of the Longmenshan Thrust Belt and Subsidence of the West Sichuan Foreland Basin

Based on fission track dating of apatite, and measurement of vitrinite reflectance of rock samples from the Longmenshan (Longmen Mountain)area and the West Sichuan foreland basin and computer modelling it is concluded that (l)the Songpan-Garze fold belt has uplifted at least by 3-4 km with an uplift rate of no less than 0.3-0.4 mm/a since 10 Ma B.P.; (2) the Longmenshan thrust nappe belt has uplifted at least by 5-6 km with an uplift rate of more than 0.5- 0.6 mm /a since 10 Ma B.P.; (3) the Longmenshan detachment belt has uplifted by 1 - 2 km at a rate of 0.016-0.032 mm/a since 60 Ma B.P.; (4) the West Sichuan foreland basin has uplifted by 1.7-3 km at a rate of 0.028-0.05 mm/a since 60 Ma B.P.; (5) the uplift rate of the area on the west side of the Beichuan-Yingxiu-Xiaoguanzi fault for the last 10 Ma is 40 times as much as that on its east side; (6) the uplifting of the the Songpan - Garze fold belt and the subsidence of the West Sichuan foreland basin 60 Ma ago exhibit a mirro-image correlation, i.e     

大陆层控构造论盆－山系与造山带成因及演化新模式

大陆构造以受中地壳塑性层控制的盆－山系和冲叠造山带厚皮构造为主要构造类型，而与中生代以来才出现的受软流层控制的大洋岩石圈板块构造截然不同。由上地壳正断层上盘断陷盆地和下盘断隆山所组成的盆－山系，与地球自转速度逐渐变慢派生不同性质水平力和重力的共同作用有关。当地球自转速度突然变化时，将派生强烈的侧压力，使升降幅度较大、具有侧向应变空间的断陷盆地与断隆山之间的上地壳发生冲叠运动，盆－山系由此演变成冲叠造山带。后者对前者存在着严格的继承关系，服从于“升降－冲叠律”。中生代以来的盆－山系和冲叠造山带有的是板块活动产物     

湖北省随枣地区推覆构造格局的研究

研究区构造格局的基本特征是上地壳多层次自北而南的逆冲—拆离，柳林、洪清、大洪山３条逆掩断层与深部拆离面一起组成了尖端指向南的楔形薄皮构造。逆冲系统以背驮式扩展演化。多层次推覆构造格局因后期高角度断裂的切割破坏而复杂化，构造格局定型时代为燕山期     

Depositional sequence architecture and filling response model of the Cretaceous in the Kuqa depression, the Tarim basin

The Cretaceous system of the Kuqa depression is a regional scale (second order) depositional sequence defined by parallel unconformities or minor angular unconformities. It can be divided into four third-order sequence sets, eleven third-order sequences and tens of fourth- and fifth-order sequences. It consists generally of a regional depositional cycle from transgression to regression and is composed of three sets of facies associations: alluvial-fluvial, braided river-deltaic and lacustrine-deltaic facies associations. They represent the lowstand, transgressive and highstand facies tracts within the second-order sequence. The tectonic subsidence curve reconstructed by backstripping technique revealed that the Cretaceous Kuqa depression underwent a subsidence history from early accelerated subsidence, middle rapid subsidence and final slower subsidence phases during the Cretaceous time, with the correspondent tectonic subsidence rates being 30-35 m/Ma, 40-45 m/Ma and 5-10 m/Ma obtained from northern foredeep. This is likely attributed to the foreland dynamic process from early thrust flexural subsidence to late stress relaxation and erosion rebound uplift. The entire sedimentary history and the development of the three facies tracts are a response to the basin subsidence process. The slower subsidence foreland gentle slope was a favorable setting for the formation of braided fluvial deltaic systems during the late period of the Cretaceous, which comprise the important sandstone reservoirs in the depression. Sediment records of impermanent marine transgression were discovered in the Cretaceous and the major marine horizons are correctable to the highstands of the global sea level during the period.     

晴空日中尺度切变环境场与对流云团发展条件

重点应用雷达回波资料结合常规气象资料、卫星云图 ,综合分析了 50 0hPa中尺度切变与陕北南部地区对流阵性降水形成、发展条件 ,指出了 50 0hPa不同的中尺度切变与有利的环境合理配置 ,是导致对流云团发展的重要因素 ,不同特征环境风切变配置与对流单体的发展趋势、强度变化、移动和合并息息相关。     

山西五台地区系舟山逆冲推覆构造地质特征

系舟山逆冲推覆构造带位于中生代燕山造山带的西南端，分布于系舟山掀斜向斜的北西翼，形成于晚侏罗世晚期，空间上由一系列近平行排列的逆冲断裂组成，剖面上表现为侧幕展布的犁式逆冲断裂所构成的前陡、后缓的单冲式叠瓦状构造。主体由北西向南东方向逆冲．逆冲扩展方式为前展式，运移距离大于5．8km。推覆构造中应力状态在横、纵向上呈现有规律的变化，根带以挤压为主的高角度逆冲断裂及复杂多级褶皱为主；中带以单剪为主，形成叠瓦状构造；锋带挤压作用增强，发育反冲断层和不对称褶皱。随着挤压应力的松弛减弱，山前形成规模较大的正断层。     

生态需水的理论内涵探讨

从生态系统水分循环的角度,较系统地探讨了生态需水的理论内涵,对生态系统水资源配置中相关且容易混淆的概念加以辨析,并分析了它们之间的相互关系.研究认为:生态缺水是生态系统水资源配置最直接的依据,而生态需水、生态储水的计算评价则是确定生态缺水的基础.通常,生态系统的水资源配置,必须在区域生态调查的基础上,结合社会经济发展状况,提出生态目标,然后进行生态需水估算、生态储水评价、生态缺水评估,并通过生态用水的可行性分析,最终确定生态保护和建设的水资源配置方案.     

关中盆地水资源可持续开发利用对策研究--以渭南市为例

以关中盆地东部的渭南市为例，概述了水资源的分布特征及其开发利用现状。认为水资源开发利用中存在水资源浪费严重，重复利用率低；行政区块限制，水资源调配不够；不合理开采地下水，出现负环境效应；地下水人工调控力度不够，不能有效的促进生态环境良性循环；对地下水资源的研究、规划和管理滞后等五个方面的主要问题。针对存在的主要问题，提出了六项水资源可持续开发利用对策，包括节水对策、开源对策、改水对策、调水对策、增补对策以及管理对策。