Experimental research on a new encapsulated heat-generating hydraulic fracturing fluid system

1 IntroductionFracturing plays an important role in increasingthe production and injection and enhancing the final re-covery of oil and gas. At present, the use of ahydroxypropyl guar gum, borate-crosslinked, hydraulicfracturing fluid systemhas become ext…     

江西彭山锡多金属矿田地质地球化学特征研究

彭山锡多金属矿田位于长江中下游的九瑞地区，是近年来发现的一个以富锡、铅、锌矿产为主的大型矿田。以黑云母二长花岗岩与二云母碱长化岗岩组成的彭山隐伏岩体为中心，各类金属矿床呈“晕圈式”分布。矿床的形成分为2个成矿期共7个阶段，通过对彭山岩体、典型矿床及围岩中的硫同位素、铅同位素、包裹体及稀土资料进行分析，反映出燕山晚期钙碱性花岗岩体的缦位与多金属矿床的形成有着密切的联系，岩浆活动为本区提供了大量的成矿物质。     

中酸性岩浆体系成矿流体及微量元素地球化学特征

从流体成矿作用角度出发，与酸性岩浆体系有关的成矿流体可以分为：酸性岩浆硅酸盐熔融体，岩浆一热液过渡阶段硅酸盐熔融体及其分异的流体，酸性岩浆熔体分异形成的热水成矿溶液。酸性岩浆体系主要提供热源和部分矿质，其提供的热源驱动地下水淋滤、萃取围岩中的成矿物质形成地下水热液成矿流体。变质岩混合岩化形成花岗质岩浆过程中所形成的混合岩化成矿流体。在此基础上，讨论了上述不同成矿流体的微量元素地球化学特征及其对成矿的控制作用。     

三种类型烃-烃不混溶包裹体组合的特征和热力学条件的计算

在自然界广泛分布着烃-烃不混溶体系中捕获的流体包裹体,由于这些包裹体具有复杂的组成和相态,因此不混溶包裹体组合的判别和热力学参数的计算常常难以进行。根据烃-烃不混溶体系中两个端员组分流体包裹体室温下的相态特征和在温度-压力平面图上等容线交点显示的位置,划分成三种类型流体包裹体组合,本介绍了三种类型流体包裹体组合特征,叙述了不混溶烃-烃包裹体组合的测定和判别方法,并且阐述均一化包裹体相态方程和气-液平衡常数原理和方法与此同时列举了自然界简单的三种类型不混溶烃-烃包裹体组合的测定、判别和计算的几个实例,利用相态方程和气-液平衡常数,不但精确地计算出包裹体均一压力,并且精确地计算出流体密度和体积等热力学参数。最后,利用均一成气相和液相的两种包裹体在 p-T 平面图上等容线交点同样计算出流体包裹体组合的捕获温度和压力。     

Effects of detailed soil spatial information on watershed modeling across different model scales

Hydro-ecological modelers often use spatial variation of soil information derived from conventional soil surveys in simulation of hydro-ecological processes over watersheds at mesoscale (10–100 km²). Conventional soil surveys are not designed to provide the same level of spatial detail as terrain and vegetation inputs derived from digital terrain analysis and remote sensing techniques. Soil property layers derived from conventional soil surveys are often incompatible with detailed terrain and remotely sensed data due to their difference in scales. The objective of this research is to examine the effect of scale incompatibility between soil information and the detailed digital terrain data and remotely sensed information by comparing simulations of watershed processes based on the conventional soil map and those simulations based on detailed soil information across different simulation scales. The detailed soil spatial information was derived using a GIS (geographical information system), expert knowledge, and fuzzy logic based predictive mapping approach (Soil Land Inference Model, SoLIM). The Regional Hydro-Ecological Simulation System (RHESSys) is used to simulate two watershed processes: net photosynthesis and stream flow. The difference between simulation based on the conventional soil map and that based on the detailed predictive soil map at a given simulation scale is perceived to be the effect of scale incompatibility between conventional soil data and the rest of the (more detailed) data layers at that scale. Two modeling approaches were taken in this study: the lumped parameter approach and the distributed parameter approach. The results over two small watersheds indicate that the effect does not necessarily always increase or decrease as the simulation scale becomes finer or coarser. For a given watershed there seems to be a fixed scale at which the effect is consistently low for the simulated processes with both the lumped parameter approach and the distributed parameter approach.     

一类广义Hamilton系统的辛格式

通过引人泊松括号，分析了无限维Hamilton的性质，并将其推广到广义Hamilton系统，且从理论和实用角度讨论了这类广义Hamilton系统的辛格式构造问题，从而为辛几何算法在一般的时间发展方程的数值求解提供新的具体途径。     

鄂尔多斯古生界流体包裹体特征及其与油气演化关系

对鄂尔多斯盆地奥陶系碳酸盐岩、石炭-二叠系石英砂岩成岩作用研究的基础上,分别对上述岩石流体包裹体作了初步研究。奥陶系碳酸盐岩包裹体均一温度具有三个区段 :6 0～ 10 0℃,10 0～ 16 0℃,16 0～ 2 2 0℃;石炭-二叠系石英砂岩包裹体均一温度三个区段为 90～ 110℃,12 0～ 14 0℃,16 0～ 2 2 0℃。并利用包裹体测温资料结合已有的镜质体反射率、磷灰石裂变径迹等研究成果,对流体包裹体在鄂尔多斯盆地油气田形成、演化中应用作了初步探讨。     

Seismic response of self‐centring hysteretic SDOF systems

The seismic response of single‐degree‐of‐freedom (SDOF) systems incorporating flag‐shaped hysteretic structural behaviour, with self‐centring capability, is investigated numerically. For a SDOF system with a given initial period and strength level, the flag‐shaped hysteretic behaviour is fully defined by a post‐yielding stiffness parameter and an energy‐dissipation parameter. A comprehensive parametric study was conducted to determine the influence of these parameters on SDOF structural response, in terms of displacement ductility, absolute acceleration and absorbed energy. This parametric study was conducted using an ensemble of 20 historical earthquake records corresponding to ordinary ground motions having a probability of exceedence of 10% in 50 years, in California. The responses of the flag‐shaped hysteretic SDOF systems are compared against the responses of similar bilinear elasto‐plastic hysteretic SDOF systems. In this study the elasto‐plastic hysteretic SDOF systems are assigned parameters representative of steel moment resisting frames (MRFs) with post‐Northridge welded beam‐to‐column connections. In turn, the flag‐shaped hysteretic SDOF systems are representative of steel MRFs with newly proposed post‐tensioned energy‐dissipating connections. Building structures with initial periods ranging from 0.1 to 2.0s and having various strength levels are considered. It is shown that a flag‐shaped hysteretic SDOF system of equal or lesser strength can always be found to match or better the response of an elasto‐plastic hysteretic SDOF system in terms of displacement ductility and without incurring any residual drift from the seismic event. Copyright © 2002 John Wiley & Sons, Ltd.     

A recursive decomposition algorithm for network seismic reliability evaluation

A new probabilistic analytical approach to evaluate seismic system reliability of large lifeline systems is presented in this paper. The algorithm takes the shortest path from the source to the terminal of a node weight or edge weight network as decomposition policy, using the Boolean laws of set operation and probabilistic operation principal, a recursive decomposition process then could be constructed. For a general weight network, the modified Torrieri method (NTR/T method) is introduced to combine with the suggested algorithm. Therefore, the recursive decomposition algorithm may be applied to evaluate the seismic reliability of general lifeline systems. A series of case studies, including a practical district electric power network system and a large urban water supply system, show that the suggested algorithm supplies a useful probabilistic analysis means for the seismic reliability evaluation of large lifeline systems. Copyright © 2002 John Wiley & Sons, Ltd.     

A response‐based decoupling criterion for multiply‐supported secondary systems

It is often infeasible to carry out coupled analyses of multiply‐supported secondary systems for earthquake excitations. ‘Approximate’ decoupled analyses are then resorted to, unless the response errors due to those are significantly high. This study proposes a decoupling criterion to identify such cases where these errors are likely to be larger than an acceptable level. The proposed criterion is based on the errors in the primary system response due to decoupling and has been obtained by assuming (i) the input excitation to be an ideal white noise process, (ii) cross‐modal correlation to be negligible, and (iii) the combined system to be classically damped. It uses the modal properties of the undamped combined system, and therefore, a perturbation approach has been formulated to determine the combined system properties in case of light to moderately heavy secondary systems. A numerical study has been carried out to illustrate the accuracy achieved with the proposed perturbation formulation. The proposed decoupling criterion has been validated with the help of two example primary‐secondary systems and four example excitation processes. Copyright © 2002 John Wiley & Sons, Ltd.