Numerical Modelling of Dissolving and Driving Exploitation of Potash Salt in the Qarhan Piaya——A Coupled Model of Reactive Solute Transport and Chemical Equilibrium in a Multi-component Underground Brine System

Firstly,the macroscopic chemical equilibrium state of a series of chemical reactions between intercrystal brine and its media salt layer (salt deposit) in Qarhan Salt Lake was studied by using the Pitzer theory.The concept of macroscopic solubility product and its relation with accumulated ore dissolving ratio were presented,which are used in the numerical model of dissolving and driving exploitation of potassium salt in Qarhan Salt Lake.And secondly,with a model forming idea of transport model for reacting solutes in the multi-component fresh groundwater system in porous media being a reference,a two-dimensional transport model coupled with a series of chemical reactions in a multi-component brine porous system (salt deposits) was developed by using the Pitzer theory. Meanwhile,the model was applied to model potassium/magnesium transport in Qarban Salt Lake in order to study the transfer law of solid and liquid phases in the dissolving and driving process and to design the optimal injection/abstraction strategy for dissolving and capturing maximum Potassium/ Magnesium in the mining of salt deposits in Qarban Salt Lake.     

Simulation experiment on hydrocarbon generating potential of various source rocks on the northern margin of the Qaidam Basin,Qinghai, China

The northern margin of the Qaidam Basin is one of the main oil-gas exploration areas in western China, where source rocks are composed mostly of Middle and Lower Jurassic dark mud shale, carbargillite and coal. A large number of subsurface and outcrop samples differing in lithology with different types of organic matter were selected for resource evaluation, research and calculation. And among them, 13 samples were used for simulation experiment on hydrocarbon generating potential of various source rocks. At first, two kinds of heating modes were compared through simulation experiment, including single temperature-step heating and continual heating. Perhaps, the process of hydrocarbon generation and expulsion occurred naturally between a close system and an open system. In addition, the first heating mode was convenient, and all its reaction products were involved in the whole thermal evolution, and the final simulation experimental results were basically in consistency with the natural evolution trend Therefore, the first heating mode was adopted and the hydrocarbon yield of every sample was worked out. According to the type and lithology of organic matter and the hydrocarbon yield of samples for simulation experiment, hydrocarbon generation and expulsion mode with three kinds of lithology and five types of source rock has been established to provide the basis for hydrocarbon generation evaluation, research and resource calculation.     

Late Cenozoic Stratigraphy and Paleomagnetic Chronology of the Zanda Basin, Tibet, and Records of the Uplift of the Qinghai-Tibet Plateau

The characteristics of Late Cenozoic tectonic uplift of the southern margin of the Qinghai- Tibet Plateau may be inferred from fluvio-lacustrine strata in the Zanda basin, Ngari, Tibet. Magnetostratigraphic study shows that the very thick fluvio-lacustrine strata in the basin are 5.89- 0.78 Ma old and that their deposition persisted for 5.11 Ma, i.e. starting at the end of the Miocene and ending at the end of the early Pleistocene, with the Quaternary glacial stage starting in the area no later than 1.58 Ma. Analysis of the sedimentary environment indicates that the Zanda basin on the southern Qinghai-Tibet Plateau began uplift at -5.89 Ma, later than the northern Qinghai-Tibet Plateau. Presence of gravel beds in the Guge and Qangze Formations reflects that strong uplift took place at -5.15 and -2.71 Ma, with the uplift peaking at -2.71 Ma.     

下庄矿田湖子地区铀矿找矿方向探讨

湖子地区位于NNE向诸广-新兴铀成矿带与近EW向大东山-漳州大断裂复合部位,是华南早、晚两期铀成矿热液活动叠加区、放射性高场区,既有"硅化带大脉"型铀矿产出,又有"交点"型铀矿存在,找矿前景良好.文章在论述下庄矿田铀成矿地质环境、铀成矿特征及铀矿定位条件基础上,分析了湖子地区铀成矿条件与找矿前景,指出该区今后铀矿找矿方向是:① 6009号硅化断裂带,在其北段找硅化带大脉型铀矿,在其南段找"交点"型铀矿;②新桥-下庄硅化断裂带和6009号带之间成矿部位,寻找硅化带型和"交点"型铀矿;③NW向、近EW向辉绿岩脉与NNE向、NE向构造交汇部位(交点),寻找"交点"型铀矿.     

Estimation of LAI and above-ground biomass in deciduous forests: Western Ghats of Karnataka, India

This study demonstrates the potentials of IRS P6 LISS-IV high-resolution multispectral sensor (IGFOV  6 m)-based estimation of biomass in the deciduous forests in the Western Ghats of Karnataka, India. Regression equations describing the relationship between IRS P6 LISS-IV data-based vegetation index (NDVI) and field measured leaf area index (ELAI) and estimated above-ground biomass (EAGB) were derived. Remote sensing (RS) data-based leaf area index (PLAI) image is generated using regression equation based on NDVI and ELAI (r² = 0.68, p ≤ 0.05). RS-based above-ground biomass (PAGB) image was generated based on regression equation developed between PLAI and EAGB (r² = 0.63, p ≤ 0.05). The mean value of estimated above-ground biomass and RS-based above-ground biomass in the study area are 280(±72.5) and 297.6(±55.2) Mg ha⁻¹, respectively. The regression models generated in the study between NDVI and LAI; LAI and biomass can also help in generating spatial biomass map using RS data alone. LISS-IV-based estimation of biophysical parameters can also be used for the validation of various coarse resolution satellite products derived from the ground-based measurements alone.     

The use of MODIS data to derive acreage estimations for larger fields: A case study in the south-western Rostov region of Russia

Recent developments in remote sensing technology, in particular improved spatial and temporal resolution, open new possibilities for estimating crop acreage over larger areas. Remotely sensed data allow in some cases the estimation of crop acreage statistics independently of sub-national survey statistics, which are sometimes biased and incomplete. This work focuses on the use of MODIS data acquired in 2001/2002 over the Rostov Oblast in Russia, by the Azov Sea. The region is characterised by large agricultural fields of around 75 ha on average. This paper presents a methodology to estimate crop acreage using the MODIS 16-day composite NDVI product. Particular emphasis is placed on a good quality crop mask and a good quality validation dataset. In order to have a second dataset which can be used for cross-checking the MODIS classification a Landsat ETM time series for four different dates in the season of 2002 was acquired and classified. We attempted to distinguish five different crop types and achieved satisfactory and good results for winter crops. Three hundred and sixty fields were identified to be suitable for the training and validation of the MODIS classification using a maximum likelihood classification. A novel method based on a pure pixel field sampling is introduced. This novel method is compared with the traditional hard classification of mixed pixels and was found to be superior.     

祁阳山字型构造质疑

结合区域构造演化背景及构造变形特征,对祁阳弧形构造的形成机制进行研究。分析表明,传统山字型构造机制难以解释祁阳弧形构造的诸多特征,且前人认为变形动力来源于东西向挤压应力场,也与印支期区域构造应力场实为NWW向的构造背景不符,因此祁阳弧形构造并不属典型山字型构造。基于研究区构造活动的客观实际,提出祁阳弧形构造的可能形成机制:NW向基底隐伏断裂和NNE-NE向主干断裂分别于印支期和燕山期产生强烈左旋走滑活动,从而使区域NNE向构造线在中段产生左旋偏转成为NNW向,从而形成S形的祁阳弧形构造。这一机制可较好解释祁阳弧形构造的若干特征,如关帝庙穹窿呈NWW走向、北反射弧构造形迹不显著、北弧弧顶脱位及内弧曲率大于外弧、南弧弧顶脱位、紫云-中田-高峰串珠状穹窿的形成等。上述认识对华南地区弧形构造研究具有一定启示意义:除山字型构造作用和砥柱作用外,还应注意断裂走滑等其他构造活动对弧形构造的制约,以及多次构造活动叠加对构造形迹可能造成的影响。     

鄂尔多斯地块早白垩世构造-热事件:杭锦旗玄武岩的Ar-Ar年代学证据

在鄂尔多斯地块北部杭锦旗黑石头沟,于下白垩统砂岩之上发现了一层玄武岩。其SiO2(46.93%)较低而碱含量(K2O+Na2O=6.21%)较高,组合指数σ=8.0,含标准矿物Ne,属于碱性橄榄玄武岩。Ar-Ar激光阶段加热定年结果表明,该玄武岩具有126.2±0.4Ma的Ar-Ar年龄。年龄数据表明杭锦旗黑石头沟玄武岩形成于早白垩世,反映鄂尔多斯地块在早白垩世发生了一次构造-岩浆-热事件,这与华北、乃至整个中国东部在早白垩世发生了较普遍的构造-岩浆-热事件具有一致性。这次构造-岩浆-热事件可能引起深部流体自地下深部上涌及在地块内部运移,为各种成矿元素的迁移、沉淀、富集和成矿创造了合适条件。     

神木北部矿区5-2煤层厚度及其底板高程趋势分析

为了查清神木北部矿区5-2煤层赋存特征及成因,选取了该矿区172个典型钻孔数据,用趋势分析法研究了5-2煤层的厚度及其底板高程度变化特征。结果显示:该区煤层厚度总体为南北厚中部薄,东厚西薄;底板高程为南北高中部低,东高西低;煤层厚度和其底板高程间普遍存在正相关关系。在该区构造稳定的背景下,后期改造对煤层厚度及其底板的影响很小,煤层赋存特征主要受沉积与剥蚀的控制。     

Prediction of UT1–UTC,LOD and AAM χ<Subscript>3</Subscript> by combination of least-squares and multivariate stochastic methods

This article presents the application of a multivariate prediction technique for predicting universal time (UT1–UTC), length of day (LOD) and the axial component of atmospheric angular momentum (AAM χ ₃). The multivariate predictions of LOD and UT1–UTC are generated by means of the combination of (1) least-squares (LS) extrapolation of models for annual, semiannual, 18.6-year, 9.3-year oscillations and for the linear trend, and (2) multivariate autoregressive (MAR) stochastic prediction of LS residuals (LS + MAR). The MAR technique enables the use of the AAM χ ₃ time-series as the explanatory variable for the computation of LOD or UT1–UTC predictions. In order to evaluate the performance of this approach, two other prediction schemes are also applied: (1) LS extrapolation, (2) combination of LS extrapolation and univariate autoregressive (AR) prediction of LS residuals (LS + AR). The multivariate predictions of AAM χ ₃ data, however, are computed as a combination of the extrapolation of the LS model for annual and semiannual oscillations and the LS + MAR. The AAM χ ₃ predictions are also compared with LS extrapolation and LS + AR prediction. It is shown that the predictions of LOD and UT1–UTC based on LS + MAR taking into account the axial component of AAM are more accurate than the predictions of LOD and UT1–UTC based on LS extrapolation or on LS + AR. In particular, the UT1–UTC predictions based on LS + MAR during El Niño/La Niña events exhibit considerably smaller prediction errors than those calculated by means of LS or LS + AR. The AAM χ ₃ time-series is predicted using LS + MAR with higher accuracy than applying LS extrapolation itself in the case of medium-term predictions (up to 100 days in the future). However, the predictions of AAM χ ₃ reveal the best accuracy for LS + AR.