重金属锌,铅对菲律宾蛤仔的急性毒性试验

本文研究了必需元素Ｚｎ及非必需元素Ｐｂ对菲律宾蛤仔的急性毒性作用，得到Ｚｎ对其的４８ｈＬＤ５０和９６ｈＬＤ５０分别为１４７．９１、１６．４０ｍｇ／ｄｍ＾３；Ｐｂ对其的４８ｈＬＤ５０和９６ｈＬＤ５０分别为３１．６２、１４．２８ｍｇ／ｄｍ＾３。估算得到Ｚｎ、Ｐｂ对菲律宾蛤仔的安全浓度分别为０．８２、０．７１ｍｇ／ｄｍ＾３。     

Experimental Study on Friction Coefficient Between Concrete and the Top Surface of Rubble Mound Foundation

Experimental studies on the friction coefficient between concrete and the top surface of a rubble mound foundation in China are reviewed. Through comparison of different test results, the development of this research is comprehensively analyzed. An experiment is carried out in the condition similar to prototype. The process curve of friction coefficient with the test block sliding is analyzed and a standard for determination of the friction coetfficient is defined. The variation features of the friction coefficient are analyzed on the basis of the present experimental results and other studies in China. It is shown that the friction coettfficient between concrete and the top surface of a rubble mound foundation decreases with the increase of the foundation pressure, and the friction coettqcient for a very fine leveling bed is smaller than that for a fine leveling bed.     

模型沙干重度的变化规律及其在泥沙模型试验中的作用

模型沙干重度在动床模型试验中是影响起动流速比尺和冲淤时间比尺的重要参数，其随淤积历时、粒径变化、埋置深浅和加工方法的不同有着不同的变化规律。通过试验，结合已有的成果，对模型沙干重度受以上几种因素的影响进行了研究，并进一步分析了其变化规律在动床模型试验中的作用。     

Experimental Study on Stability of Breakwaters with Penetrating Box Foundations

1 .ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｐｅｎｅｔｒａｔｉｎｇｂｕｃｋｅｔａｎｄｂｏｘｆｏｕｎｄａｔｉｏｎｉｓａｎｅｗｔｙｐｅｏｆｓｔｒｕｃｔｕｒｅ ,ｗｈｉｃｈｈａｓｂｅｅｎａｐｐｌｉｅｄｉｎｍａｎｙｅｎｇｉｎｅｅｒｉｎｇｆｉｅｌｄｓ .Ｉｎｖｉｅｗｏｆｔｈｅｈｉｇｈｃｏｎｓｔｒｕｃｔｉｏｎｃｏｓｔａｎｄｔｈｅｆｏｒｍｉｄａｂｌｅｃｏｎｓｔｒｕｃｔｉｂｉｌｉｔｙｏｆｏｆｆ ｓｈｏｒｅｐｌａｔｆｏｒｍｓｗｉｔｈｐｉｌｅｄｆｏｕｎｄａｔｉｏｎｓ ,Ｂａｅｒｈｅｉｍｅｔａｌ.(1 990 )ｐｒｏｐｏｓｅｄｔｈｅｃｏｎｃ…     

A higher-order σ-coordinate non-hydrostatic model for nonlinear surface waves

A higher-order non-hydrostatic model in a σ-coordinate system is developed. The model uses an implicit finite difference scheme on a staggered grid to simultaneously solve the unsteady Navier-Stokes equations (NSE) with the free-surface boundary conditions. An integral method is applied to resolve the top-layer non-hydrostatic pressure, allowing for accurately resolving free-surface wave propagation. In contrast to the previous work, a higher-order spatial discretization is utilized to approximate the large horizontal pressure gradient due to steep surface waves or rapidly varying topographies. An efficient direct solver is developed to solve the resulting block hepta-diagonal matrix system. Accuracy of the new model is validated by linear and nonlinear standing waves and progressive waves. The model is then used to examine freak (extreme) waves. Features of downshifting focusing location and wave asymmetry characteristics are predicted on the temporal and spatial domains of a freak wave.     

An Experi mental Study on Wave-Induced Dynamic Stresses in Seabed

1 .IntroductionEvery year ,Taiwanis subjectedtotwo or three typhoonintrusions in average which always causedisasters . Most of the disasters which occur around the coastal zone are due to seabed instability andcoastal structure destruction caused bytyphoo…     

Instrumentation and Numerical Analysis of Cylindrical Diaphragm Wall Movement During Deep Excavation at Coastal Area

The lateral deflection of a cylindrical diaphragm wall and the associated ground movement induced by deep excavation are analyzed by performing site instrumentations and numerical analyses in the coastal area of Korea. Wall lateral deflection, rebar stress, and pore water pressure were measured and analyzed in eight directions. Variations of soil properties with the decrease of confining pressure are compared by performing various in situ tests before ad after excavation. To calculate the wall lateral deflection accurately, the effects of small strain nonlinearity, confining pressure, and the hysteresis loading/unloading loop developed during excavation are considered in the proposed numerical analysis. By comparing numerical results with measured ones, the importances of considering small strain nonlinearity and confining pressure reduction in the nonlinear (FEM) are emphasized. Also, the effects of wall stiffness on the performance of cylindrical diaphragm walls are studied for future similar excavation in the coastal area.     

高精度CTD剖面仪研制过程中的专用设备

本文介绍了“油水分离压力罐”的主要理论依据及该设备采用的特殊的机械结构，实践证明，利用该设备实现了在实验室条件下，模拟深海重力场检测CTD剖面仪中的某些关键传感器的目的。     

旧路改建高速公路中地基强夯效应测试与工艺参数分析

旧路改建高速公路遇到的最主要的问题是地基的不均匀沉降。数值分析表明,对新的天然地基进行处理是解决这一问题的关键。强夯是加固地基的一种有效措施,为了对强夯工艺参数进行优化研究,对夯锤冲击地面过程中产生的动孔隙水压力、动土应力以及夯后超静孔隙水压力的消散过程进行了跟踪测试与分析。结果表明,对以风化料为主的地基,最大夯击数不宜超过4击,而且铺底夯完成2d后就可进行满夯。     

智能全站仪在大型压力容器焊接变形监测中的应用

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。