Stability of waterfront retaining wall subjected to pseudo-static earthquake forces

Waterfront retaining walls supporting dry backfill are subjected to hydrostatic pressure on upstream face and earth pressure on the downstream face. Under seismic conditions, if such a wall retains a submerged backfill, additional hydrodynamic pressures are generated. This paper pertains to a study in which the effect of earthquakes along with the hydrodynamic pressure including inertial forces on such a retaining wall is observed. The hydrodynamic pressure is calculated using Westergaard's approach, while the earth pressure is calculated using Mononobe-Okabe's pseudo-static analysis. It is observed that when the horizontal seismic acceleration coefficient is increased from 0 to 0.2, there is a 57% decrease in the factor of safety of the retaining wall in sliding mode. For investigating the effect of different parameters, a parametric study is also done. It is observed that if φ is increased from 30° to 35°, there is an increase in the factor of safety in the sliding mode by 20.4%. Similar observations were made for other parameters as well. Comparison of results obtained from the present approach with [Ebeling, R.M., Morrison Jr, E.E., 1992. The seismic design of waterfront retaining structures. US Army Technical Report ITL-92-11. Washington DC] reveal that the factor of safety for static condition (k_h=0), calculated by both the approaches, is 1.60 while for an earthquake with k_h=0.2, they differ by 22.5% due to the consideration of wall inertia in the present study.     

威海地区高压岩石组合及其成因演化

利用矿物地质温压计估算变质高峰期温压条件、退变质作用温压条件。研究表明,本区为鲁苏构造带的北延部分,代表本区晚元古代华南陆块与华北陆块的碰撞及三叠纪华北陆块向华南陆块推覆事件的发生和演化。     

The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure

The paper presents a theoretical and an experimental investigation into the buckling of seven oblate hemi-ellipsoidal dome shells under external hydrostatic pressure. Four of the shells were made in glass reinforced plastic and three were made from a thermosetting plastic called solid urethane plastic. All the vessels were tested to destruction. The theoretical study was made with the aid of a non-linear finite element solution, where both geometrical and material non-linearity were allowed for. Good agreement was found between experiment and theory for all the vessels. The very oblate domes failed axisymmetrically. Theoretical convergence was good for the more oblate domes but it was not as good as for the less oblate domes. This may have been because the less oblate domes did not fail in a classical axisymmetric manner as was expected. This work is of much importance in ocean engineering.     

Experimental investigation on a two-part underwater towed system

An experimental set-up is developed and proved to be effective for laboratory study of an underwater towed system. The experimental technique gives a practical method for monitoring the kinematic and dynamic performance of an underwater towed system in a ship towing tank. Both the theoretical and experimental results in the investigation indicate that the hydrodynamic response of a towed vehicle to the wave induced motion of a towing ship can be significantly reduced by applying a two-part tow method. A comparison of the numerical and experimental results in the investigation demonstrates that the numerical simulation results are close to the experimental data, overall agreement between experimental and theoretical results is satisfactory. The results qualitatively verify the mathematical model of a two-part underwater towed system proposed by Wu and Chwang [Wu, J., Chwang, A.T., 2000. A hydrodynamic model of a two-part underwater towed system. Ocean Engineering 27 (5), 455–472].     

利玛原甲藻腹泻性毒素的生物学测定

１９９４年和１９９５年分季度从海南省三亚海区采集附生于褐藻上的利玛原甲藻Ｐｒｏｒｏｃｅｎｔｒｕｍｌｉｍａ（Ｅｈｒｅｎｂｅｒｇ）Ｄｏｄｇｅ，经丙酮提取。提取液用ｐＨ＝３的水除去麻痹性贝毒（ＰＳＰ），取残留液注入小白鼠（ＢａＢ／Ｃ纯系），有腹泻性贝毒（ＤｉａｒｒｈｅｔｉｃＳｈｅｌｌｆｉｓｈＰｏｉｓｏｎｉｎｇ即ＤＳＰ）中毒的症状出现。初步确定此种藻中提取的毒素为ＤＳＰ。     

A moving PIV system for ship model test in a towing tank

A moving particle image velocimetry (PIV) system was successfully developed and used in a large towing tank for ship model tests to observe velocity fields near ship models. The experimental method involved adjustable optical devices for various test conditions and a special particle-seeding device. The streamwise and cross-streamwise flow fields of a yacht model and a tanker model were measured. Ship type, bottom shape, and towing speed were found to be the causes of problems affecting optical access and image quality. Possible solutions, deeper optical ducts, dark painting color, and pre-processed analysis method, were proposed and discussed.     

An experimental study on non-linear progressive wave-induced dynamic stresses in seabed

In this study, the dynamic stresses within the seabed induced by non-linear progressive waves were explored through a series of hydraulic model tests on a movable bed within a wave flume. By comparing Stokes’ 2nd-order wave theory with the theory of wave-induced dynamic stresses within the seabed as proposed by Yamamoto et al. [1978. On the response of a poro-elastic bed to water waves. Journal of Fluid Mechanics 87 (1), 193–206.] and Hsu and Jeng [1994. Wane-induced soil response in an unsaturated anisotropic seabed of finite thickness. International Journal for Numerical and Analytical Methods in Geomechanics 18, 785–807], the experimental results show that the pressure on the seabed surface, the pore water pressure within the seabed as well as the vertical and the horizontal stresses are all smaller than their theoretical values. If we were to obtain the characteristics of seabed soil, the analytical solution of Hsu and Jeng [1994. Wane-induced soil response in an unsaturated anisotropic seabed of finite thickness. International Journal for Numerical and Analytical Methods in Geomechanics 18, 785–807] might agree to the simulation of the wave-induced effective stresses and shear stress in the sandy seabed. A different phase shift exists among all the three soil stresses. Their influences on the three dynamic stresses within seabed soil are important for seabed stability, and can be used in the verification of numerical models. In the whole, the non-linear progressive waves and the naturally deposited seabed are found to have a strong interaction, and the behavior of the induced dynamic stresses within the seabed is very complicated, and should be investigated integrally.     

Analysis of seabed instability using element free Galerkin method

Wave-induced seabed instability, either momentary liquefaction or shear failure, is an important topic in ocean and coastal engineering. Many factors, such as seabed properties and wave parameters, affect the seabed instability. A non-dimensional parameter is proposed in this paper to evaluate the occurrence of momentary liquefaction. This parameter includes the properties of the soil and the wave. The determination of the wave-induced liquefaction depth is also suggested based on this non-dimensional parameter. As an example, a two-dimensional seabed with finite thickness is numerically treated with the EFGM meshless method developed early for wave-induced seabed responses. Parametric study is carried out to investigate the effect of wavelength, compressibility of pore fluid, permeability and stiffness of porous media, and variable stiffness with depth on the seabed response with three criteria for liquefaction. It is found that this non-dimensional parameter is a good index for identifying the momentary liquefaction qualitatively, and the criterion of liquefaction with seepage force can be used to predict the deepest liquefaction depth.     

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.     

Investigation of the hydrate reservoir production under different depressurization modes

Abstract

Large reserves of natural gas hydrates exist, and the depressurization method has the greatest potential for gas hydrate reservoir recovery. Currently, the most commonly adopted depressurization simulation method is a constant bottom-hole pressure production scheme. This study proposes a new depressurization mode with decreasing bottom-hole pressure. The production characteristic was numerically investigated using this method. The results show the following: (1) As the depressurization exponent (n) decreases, the development effect improves, and production indexes including cumulative gas production/dissociation and gas-water ratio increase. However, the reservoir energy consumption is higher and the hydrate reformation is more severe. (2) Compared to the proposed depressurization mode, the hydrate production index of the constant bottom-hole pressure production (n?=?0) is better. However, the hydrate reservoir energy consumption is higher and the hydrate reformation is more severe using constant bottom-hole pressure production. (3) To achieve a balance between production and reservoir energy consumption during depressurization production, the bottom-hole pressure should be controlled by selecting a suitable depressurization exponent between n_min and n_max, which can be determined through numerical simulations.