桥梁隔震体系振动台试验研究(III)——测试结果分析

根据前文所述的测试结果 ,本文主要分析了隔震构造、橡胶支座水平刚度、地震输入频谱特性、地震烈度、输入方向、桥墩高度、桥墩嵌固程度等因素对隔震效果的影响 ,揭示了隔震体系耗散地震能量输入的机理 ,所得出的结论对工程实践具有指导意义。     

三维地震数据离散光滑插值的共轭梯度法

针对三维地震数据插值,提出采用Laplacian算子进行光滑约束的插值方法,并借鉴Mallet研究的离散光滑插值思路,采用预条件共轭梯度法,直接生成网格节点上的值,从而回避寻求满足插值方程的函数. 为了实现其中Laplacian算子的快速求逆,文中引入Claerbout螺旋坐标系谱因式分解理论. 在螺旋坐标系下,Laplacian算子的表示矩阵具有Toeplitz结构,其快速求逆可由谱法LU分解实现. 基于二维离散光滑插值,文中还给出共轭梯度法与NMO相结合的沿时间切片逐层处理的离散光滑插值流程. 最后,应用该方法对模型数据和实际三维地震数据进行了处理.     

Hybrid vibration experiments with a bridge foundation system model

In order to improve seismic design technology of bridges, it is necessary to evaluate the vibration characteristics of a bridge–soil system that consists of soil, foundation structure, pier and superstructure. However, there have been few experimental studies on seismic behavior of bridge–soil system. In this paper, we conducted the hybrid vibration experiment on seismic behavior of bridge–soil system, and examined the applicability of hybrid vibration experiment to study seismic response of bridge–soil system. Based on the experiment results, seismic response of bridge was quantitatively studied.     

A method to estimate hydraulic conductivity while drilling

A field test and analysis method has been developed to estimate the vertical distribution of hydraulic conductivity in shallow unconsolidated aquifers. The field method uses fluid injection ports and pressure transducers in a hollow auger that measure the hydraulic head outside the auger at several distances from the injection point. A constant injection rate is maintained for a duration time sufficient for the system to become steady state. Exploiting the analogy between electrical resistivity in geophysics and hydraulic flow two methods are used to estimate conductivity with depth: a half-space model based on spherical flow from a point injection at each measurement site, and a one-dimensional inversion of an entire dataset.

The injection methodology, conducted in three separate drilling operations, was investigated for repeatability, reproducibility, linearity, and for different injection sources. Repeatability tests, conducted at 10 levels, demonstrated standard deviations of generally less than 10%. Reproducibility tests conducted in three, closely spaced drilling operations generally showed a standard deviation of less than 20%, which is probably due to lateral variations in hydraulic conductivity. Linearity tests, made to determine dependency on flow rates, showed no indication of a flow rate bias. In order to obtain estimates of the hydraulic conductivity by an independent means, a series of measurements were made by injecting water through screens installed at two separate depths in a monitoring pipe near the measurement site. These estimates differed from the corresponding estimates obtained by injection in the hollow auger by a factor of less than 3.5, which can be attributed to variations in geology and the inaccurate estimates of the distance between the measurement and the injection sites at depth.     

液化场地桩-土-桥梁结构动力相互作用振动台试验研究进展

本文在全面归纳与总结液化场地桩－土－桥梁结构动力相互作用振动台试验及与之相关领域的国内外研究进展基础上，直接针对我国桥梁工程中的主要震害问题，提出在我国开展液化场地桩－土－桥梁结构动力相互作用振动台试验研究的必要性，并阐述作者对液化场地桩－土－张桥梁结构动力相互作用振动台试验中若干问题的认识。     

铅橡胶复合阻尼器的性能试验研究

介绍作者提出的铅橡胶复合阻尼器的构造与耗能原理，通过不同形状，不同大小铅心的8个铅橡胶复合阻尼器的循环荷载试验，研究了频率、应变幅值、循环次数、铅芯直径、竖向压力等对铅橡胶复合阻尼器的影响规律。研究结果表明，铅橡胶复合阻尼器工作性能稳定，耗能性能和抗疲劳性能好。     

南京地区新近沉积土的动剪切模量和阻尼比的初步研究

本文通过对南京地区两个工程场地漫滩相成因的砂土和淤泥质粉粘土与粉砂互层土的自振动柱试验结果进行分析，探讨了围压对剪切模量G及阻力比λ的影响，通过与Seed和Idriss建议的砂土G/Gmax-γ和λ-γ曲线变化范围的对比，认为不能简单地把淤泥质粉质粘土与粉砂层土当作砂土或粉质粘土对待。     

大开间小型混凝土砌块10层模型房屋抗震性能试验研究(Ⅰ)

我国抗震设计规范（GB50011－2001）规定在6、7、8度区，混凝土小砌块结构分别可以建七、六、五层。由于混凝土小砌块结构的最大优势在于10－20层（与混凝土框架或框架剪力墙结构比）。本文按1／4比例制作了10层混凝土小砌块结构模型，按7度设防要求实施构造措施，通过振动台试验研究模型结构的抗震性能。结果表明，模型结构完全能够满足在7度区“小震不坏，大震不倒”的要求。圈梁、构造柱以及水平拉结筋构成的约束体系抗震作用是明显的。试验利用砌块的非注芯孔灌注铁砂来模拟墙体出平面动力效应。在本模型的构造措施下，平出面反应不对结构破坏起控制作用。     

2001年昆仑山口8.1级巨震后中国大陆、云南地震趋势研究

分析研究了2001年11月14日昆仑山口8．1级巨震对中国大陆云南未来几年地震趋势的影响，指出巨震后6年大陆可能仍然处于地震活跃期，其间大陆西部发生7．0级以上大震可能性较大；受2000－2001年欧亚带东南段大震活动过程及巨震调整影响，未来1－3年云南省可能进入新的活跃期，6．5级以上强震危险性增加。     

Power of the Mann–Whitney test for detecting a shift in median or mean of hydro-meteorological data

 The non-parametric Mann–Whitney (MW) statistic test has been popularly used to assess the significance of a shift in median or mean of hydro-meteorological time series. It has been considered that the test is more suitable for non-normally distributed data and it may be not sensitive to the distribution type of sample data. However, no evidence has been provided to demonstrate these. This study investigates the power of the test in various circumstances by means of Monte Carlo simulation. Simulation results demonstrate that the power of the test is very sensitive to various properties of sample data. The power depends on the pre-assigned significance level, magnitude of a shift, sample size, and its occurrence position within a time series; and it is also strongly affected by the variation, skewness, and distribution type of a time series. The bigger the magnitude of a shift, the more powerful the test is; the larger the sample size, the more powerful the test is; and the bigger the variation within a time series, the less power the test has. The test has the highest power if a shift occurs at the midpoint of a time series. For the samples with different distribution types, the power of the test is dramatically different. The test has the highest power for time series with the extreme value type III (EV3) distribution while it indicates the lowest power for time series with the lognormal distribution.