一种横观各向同性岩体蠕变模型

层状岩体由于层理面或者结构面的存在,在力学上具有横观各向同性的特点,现有的各向同性蠕变模型难以全面反映横观各向同性岩体的蠕变力学特性。为构建能够反映横观各向同性岩体的三维蠕变模型,以能反映瞬时应变、减速蠕变和稳态蠕变特征的黏弹性Burgers模型为基础,基于常泊松比假定,在三维各向同性蠕变本构方程的基础上,按照算子替换的方法,将横观各向同性柔度矩阵代替各向同性柔度矩阵,并考虑了平行和垂直层理方向岩体蠕变力学行为的差异性,推导了横观各向同性岩体的三维蠕变本构方程。根据本构方程的特点,提出了根据平行和垂直方向岩体蠕变试验结果进行三维蠕变本构模型中蠕变参数的辨识方法。将提出的模型应用于三轴蠕变试验参数辨识,从而获得了一套完整的三维蠕变参数,并与试验结果进行对比分析,从而验证了所提模型与方法的合理性和有效性。进一步,指出了传统蠕变试验设计方案的局限性,给出了横观各向同性材料蠕变试验设计建议。研究成果为研究岩体三维蠕变机制提供了新思路,可对岩体蠕变试验设计提供相应的科研支撑。     

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.     

基于跨断层监测资料的金州断裂活动性研究

利用金州地震台跨断层形变观测资料分析金州断裂现今活动特征.长趋势分析结果表明,金州断裂以右旋兼正断为主,活动水平总体较弱.断裂活动分段分析结果表明,北段活动速率高于南段.GPS资料分析表明,2011-03-11日本MW9.1地震对东北地区应力积累具有缓解作用,结合金州断裂跨断层数据认为,金州断裂在2011～2014年活...     

Soil creep: problems raised by a 23 year study in Australia

In October 1965 and February 1966, 55 Young-pits were installed in tropical Northern Territory (NT) and temperate New South Wales (NSW). Pits were monitored in 1968, 1971 and 1974; also, for the NT only, in 1988. In each region, half of the pits are on weathered granite, and half on sandstone. Local relief is 30m or less, and slopes are up to 20°. Annual rainfall is evenly distributed in the NSW sites (800 mm a⁻¹), but is confined to the five to six month wet season in NT (1200 mm a⁻¹). Six pits suffered external disturbance and so were not analysed. Analysis of 160 rods in 49 undisturbed pits shows: (1) vectorial movement generally not downslope parallel to the ground surface, but dominated by a vertically downward component; (2) significant uphill and vertically upward components of movement for many rods; (3) a weak correlation between total movement and sine of slope; (4) rapid movement during 1965-68, and slow movement thereafter; (5) significantly higher creep rates on the NT granites than on all other sites, perhaps because mound-building termites are especially active there. We conclude that our data do not support soil creep models which assume that all movement is downslope and slope-parallel. Repeated long-term measurements are essential to distinguish long-term creep rates from the short-term effects of disturbance. Copyright © 1999 John Wiley & Sons, Ltd.     

基于改进Bingham模型的软岩参数非定常三维非线性黏弹塑性蠕变本构研究

传统线性元件组合模型难以描述岩石非线性加速蠕变阶段特性,给工程应用带来了巨大困难。提出一种新的应变触发非线性黏壶元件,并将其与Bingham模型串联,建立了可以描述岩石等速和加速蠕变特性的一维本构模型,进而推导出相应的三维蠕变本构模型,再将三轴压缩过程中岩石弹性模量的衰减方程引入该三维蠕变本构方程,得到一个能反映岩石蠕变全过程特性的三维非线性黏弹塑蠕变本构模型,根据泥岩蠕变试验数据对该模型参数进行了辨识。模型理论计算值与泥岩蠕变试验数据的对比表明改进的Bingham模型不仅可以充分反映软岩的等速蠕变特性,还可以很好地描述软岩的衰减和加速蠕变规律,且模型元件少,组合形式简单,为软岩非线性蠕变本构模型研究提供了新的借鉴。     

移动状态边界面法在黏性土不排水蠕变孔压分析中的应用

在黏性土的各种流变现象的数学模拟研究中,不排水蠕变孔压方程几乎是空白。基于临界状态土力学理论,采用与时间相关的移动状态边界面法,给出了适用于正常固结黏性土的不依赖状态边界面具体形态的不排水蠕变孔压公式。正常固结黏性土的不排水蠕变孔压可以看作是体积蠕变势和剪应力水平增大造成的剪缩这两种作用的结果,前者与参数 有关（ 为次压缩指数, 为压缩指数）,后者则与状态边界面的具体形态有关。在此基础上进一步给出了可方便用于试验数据分析的双对数和单对数形式的两个公式。以修正剑桥模型椭圆形状态边界面为例,分析了双对数和单对数坐标系下蠕变孔压曲线的斜率m和m′与土的流变参数 的关系。采用提出的方法,很好地预测了Walkers给出的Leda clay黏土的蠕变孔压系数,并基于以上两种作用解释了Leda clay黏土的蠕变孔压形成的机制。     

砂土高压蠕变微观机理分析

砂土层在地面沉降过程中呈现一定的蠕变特性。文章采用一维压缩试验对4 MPa 下砂土的变形特征进行了研究,并 采用改进的试验装置对砂土的微观结构进行了提取。通过对8 组不同级配砂土样的蠕变特性和微观结构分析,得到如下结 论：粒径单一的砂土在蠕变过程中更容易出现突变,砂粒受力后更容易发生破碎,产生滑移错动;砂土蠕变的蠕变量与砂 粒级配密切相关,砂土的粒径越单一且粒径越大时,砂土的蠕变量也越大;采用表征砂土颗粒形状复杂程度的形状系数, 从微观上定量分析了砂土在蠕变过程中发生破碎的情况和蠕变量大小,且形状系数越小,表明该种砂土形状越复杂,在蠕 变过程中砂土的破碎性越高,蠕变量越大。     

深厚覆盖层上高砾石土心墙堆石坝变形监测分析

在深厚覆盖层上建筑的高砾石土心墙堆石坝得到迅猛发展的同时,正确地认识坝体变形规律和合理地数值模拟是不可忽视的问题。堆石坝变形的影响因素多且复杂,监测成果的分析对研究上述问题具有重要意义。以硗碛大坝的监测资料为基础,结合坝体的填筑和蓄水过程,对位于深厚覆盖层上的百米级砾石土心墙堆石坝的变形规律进行了系统分析,并与其坝高、覆盖层深度、河谷宽度等方面都具有相似性的毛尔盖大坝监测资料进行了对比分析。通过分析两座大坝监测结果,对坝体的变形特性进行了规律性总结,对湿化和蠕变作用以及水库填筑和蓄水过程对坝体变形的影响有了一定认识。分析结论可为正确认识以及合理模拟和预测同类坝体的变形特性提供参考和依据。     

西安地区地裂缝带Q3原状黄土流变特性试验研究

汾渭盆地是我国乃至世界上地裂缝最为发育、灾害最为严重的地区。考虑在漫长的地质历史过程中黄土的流变特性对地裂缝破裂扩展模式的影响,采用分级循环加卸载方式,对西安地区长安地裂缝（fc1）带Q3原状黄土进行了不同围压下的固结不排水三轴流变特性试验,得到了地裂缝带Q3原状黄土的蠕变加、卸载曲线和应变速率与时间关系曲线。试验结果表明,不同围压下地裂缝带Q3原状黄土表现为低应力下为减速蠕变,高应力下为减速蠕变和等速蠕变的特征。并基于统一流变力学模型理论,建立了适用于西安地区地裂缝带Q3原状黄土的三维蠕变本构模型,获得了相应的本构模型参数。该成果为研究隐伏地裂缝破裂扩展模式及其力学机制奠定了基础。     

一种控制直剪蠕变试验剪应力的简易装置

土的蠕变是指土在保持应力不变的条件下,应变随时间延长而增加的现象。研究土的蠕变性质对于确定土的长期强度有重要意义,土的蠕变研究也是近几年的研究热点。然而,土的蠕变试验周期特别长,因此简便、易行又有一定可信度的蠕变试验仪器,对于土蠕变性质的研究有较大的推动意义。直剪蠕变试验是研究确定土的蠕变性质的一种最简单、最直观的试验方法。但由于该试验只是控制剪切力不变,剪切过程中,试样受剪面积逐渐减小,剪应力持续增大,整个过程并不是蠕变。通过在传统仪器上附加一个简单装置,利用液体的浮力来控制试验剪切力,从而使得试样在剪切过程中的剪应力不变。在对仪器进行相应改进后,做了对比试验,检验该装置对剪应力的控制效果,试验结果表明,该简易装置可在一定程度上控制剪应力。