东海内陆架表层沉积物粒度及其净输运模式

根据对东海内陆架海底沉积物的粒度测试,运用Gao-Collins"粒度趋势分析"方法,探讨了东海内陆架海底表层沉积物的粒度分布特征和净输运趋势。结果表明,研究区表层沉积物可以分为两类:细颗粒(>5Φ)和粗颗粒(<5Φ);细颗粒分布于研究区的大部分区域,而粗颗粒主要分布在闽江、瓯江等入海河流口门以及马祖等海岛附近;表层沉积物的平均粒径、分选系数、偏态等粒度参数对应性较好,总体特征为粒径越粗,分选越差,偏态更正偏,而粒径越细,分选越好,偏态也较低;粒径趋势分析显示东海陆架表层沉积物的运移模式总体为NE—WS方向运移,而研究区边缘在运移过程中发生向左右两侧的偏移,南部闽江河口区沉积物由近岸向海方向辐射运移,研究区表层沉积物的净输运模式主要受控于流系和地形等多种因素。     

不同指标下的穗港城市走廊潜在通达性及其空间格局

本文以最短时间距离以及加权平均出行时间两种指标,其中后者以未来人口数为其加权因子,在对广州至香港之间廊道状区域的陆路交通网络现状通达性数据进行计算的基础上,对其潜在通达性及其空间格局进行预测分析。由此得出,穗港走廊内部的陆路网络潜在通达性呈现出同心环状态分布的空间格局,其潜在通达性水平以环心为最优,逐渐往外层递减;两种指标换算成通达性系数进行对比,发现利用未来人口数作为加权因子之后,走廊南部在整个网络的通达性地位得到了提升,但走廊北部的通达性地位却受到了削弱;穗港走廊潜在通达性空间格局比现状更加收敛,整体通达性水平得到提升,初始通达性水平越低的地方,提升的幅度越大。     

A field test of a linear stability model for crescentic bars

A morphodynamical linear stability analysis is used to predict the natural development of crescentic bed patterns and rip channels. The purpose is to investigate whether this technique, which is useful for understanding the physics of emerging bed-forms, can be used to make quantitative predictions in the field, which may then be of use for coastal engineers.     

南天山西段南缘断裂构造特征及对乌什凹陷发育的控制

乌什凹陷位于南天山西段以南,新生代受南天山崛起的陆内造山作用制约,与库车坳陷有相同的成盆动力学背景。因乌什凹陷南有温宿凸起阻挡了挤压应力的传播,东与库车坳陷间有北西向的构造变换带(西秋里塔格构造带)所隔,新生代变形与库车地区有不同的特征。以吉迪克组的泥岩层为滑脱面,乌什凹陷的中-新生界可分为上、下两个构造层,总体看上构造层以背冲构造为特征,下构造层则发育基底卷入的对冲构造。乌什凹陷的这一变形特征还与新生代挤压应力场自东向西迁移和走滑作用吸收了部分冲断变形有关,反映了南天山新生代构造对海西-印支期碰撞构造的继承性。文章简述了南天山造山带的构造演化,介绍了乌什凹陷周缘的主要断裂的特征,恢复了乌什凹陷中-新生代的演化并与库车坳陷进行了对比。在此基础上探讨了乌什凹陷的成盆动力学机制,分析了乌什凹陷与南天山造山带的耦合演化,指出该区的油气勘探应以三叠系为主要目的层。     

The Quaternary Lancaster Sound trough‐mouth fan,NW Baffin Bay

The development of the Lancaster Sound Trough Mouth Fan (TMF) and glacial history in Arctic Canada were studied using a high‐resolution seismic profile across the entire fan and two piston cores. Stacked tills separated by erosion surfaces on the shelf pass seaward through till deltas into thick transparent glacigenic debris flow (GDF) deposits on the slope, separated by thin, well‐stratified glaciomarine layers. An age model was built by ties to the Ocean Drilling Program Site 645. The deepest GDF on the seismic profile was indicative of the onset of shelf‐crossing glaciation in the Early Pleistocene. The transition of the growth of Lancaster Sound TMF from an aggradational sequence (unit M) to an aggradational–progradational sequence (unit F) occurred at the Middle Pleistocene transition in glacial cyclicity. In the most recent glacial cycle, GDF sheets were deposited during Heinrich events 4 and 2 according to the correlation of the main detrital carbonate beds in two piston cores. The outmost till wedge reflects the maximum advance of the grounding glacier, far seaward of previously proposed Last Glacial Maximum ice extent. Copyright © 2011 John Wiley & Sons, Ltd.     

An empirical approach to estimating population parameters from censored fracture-length distributions

Most fracture data sets are length-censored because of incomplete exposure at the surface, so estimating values of parameters of the sampled populations is difficult. Unless the form of the distribution function of the population is known, or one which is analytically tractable is assumed, length-censoring presents formidable problems in determining population parameters. Tests conducted on experimental fracture patterns developed in clay samples subjected to simple shear loading are the basis of a distribution-free way to estimate population parameters. Comparison of random samples of censored and uncensored fracture lengths shows that a useful, homogeneous data set consists of those cracks which lie entirely within the sampling area (two-ended cracks). The properties of this data set can be used to estimate the mean and variance of uncensored data. Estimates of the maximum fracture length of uncensored data, using the variance and maximum length of these two-ended cracks, show good agreement with measured values. Knowledge of the mean, variance, and maximum value of fracture-length populations are of interest in engineering and hydraulic studies, as well as in remote sensing studies of the Earth and other planets. Application of these results to data on rock masses are subject to the caveat that different crack-growth mechanisms in clay and rock may affect the accuracy of the calculations.     

Late quaternary monsoon patterns on the Loess Plateau of China

China's Loess Plateau was formed under special conditions. The tectonic movement, topographical characteristics, and monsoon patterns combined to create a favourable environment for the accumulation of thick loessic deposits. The Loess Plateau itself is part of the ‘Monsoon Triangle’ of China, a region very susceptible to climatic changes. Throughout the Upper Pleistocene the palaeoenvironment on the Loess Plateau alternated from steppe, to deciduous forest and coniferous forest, in response to shifts in the atmospheric circulation. Three monsoon patterns appear to be indicated: (1) a full glacial monsoon pattern (18000–15000 yr BP) which induced a cold and dry climate favouring loess accumulation in steppe conditions; (2) an interglacial monsoon pattern (last interglacial and Holocene) in which a warm humid climate prevailed with deciduous forests, leaving palaeosols interbedded within the loess sequence; and (3) a transitional or interstadial monsoon pattern (50 000–23 000 yr BP) in which the climate was cold and humid in the Loess Plateau, encouraging the development of coniferous forest.     

A four-parameter,two degree-of-freedom block-spring model: Effect of the driver velocity

We analyze the effect of tectonic plate velocities in the earthquake pattern using a simple mass-spring model of the Burridge and Knopoff type with two blocks and a velocity-weakening friction law. Previous versions of the two-block model assume a steady driver during slip events (limit of zero driver velocity), which, in some cases makes necessary the introduction of artificial parameters to start the numerical integration of the equations of motion at impending slip of any block. Still maintaining the condition of zero driver velocity during slip, we shall introduce a procedure to start the numerical integration without introducing artificial parameters and this will be done by using a linearized version of the equations of motion valid for small velocities and considering nonzero driver velocity. We also introduce a four parameter model in which the driver velocity enters the equations during the whole simulation, and analyze the effect of the new parameter, the driver velocity, in the displacement and time patterns of blocks motion, directly related to earthquake statistics such as coseismic slips and average repeat times.