蚀变岩的蠕变特性研究

以某水电站工程项目为依托,利用自行研制的试验仪器对大量的蚀变岩做了单轴压缩流变试验。通过对试验数据的处理和分析,得到了该种岩石的流变,并对蚀变岩的蠕变特性进行了分析总结,为工程设计提供了试验依据。     

长江流域沿江镉异常源追踪与定量评估的方法技术研究:以长江流域安徽段为例

长江全流域性的Cd异常是被中国正在进行的多目标地球化学调查发现的重大生态环境问题。以长江流域安徽段为研究对象,对沿江镉异常源追踪与定量评估的方法技术进行了系统研究。通过对安徽段长江干流及其主要支流悬浮物中元素含量的测量查明:悬浮物是流域内重金属元素大跨度迁移的主要载体;Cd在悬浮物中的富集程度远远大于其他重金属元素,这或许正是Cd可以形成沿江流域性异常的主要原因;长江干流悬浮物中重金属元素含量的变化明显受到沿江支流的影响。安徽段长江干流及其主要支流重金属元素输出通量定量计算结果表明:秋蒲河是安徽段重金属元素输出通量最大的支流,每年在安徽段长江两岸土壤中沉积下约4.45t的Cd。利用悬浮物加密测量、1∶5万土壤测量和岩石测量对顺安河流域Cd异常源追踪结果显示:内生金属矿床特别是铅锌矿是悬浮物中Cd的最大的供应源。采用河漫滩沉积物分层采样技术和同位素测年技术,初步恢复了研究区Cd等重金属元素沉积和污染的地球化学历史,对研究区Cd等重金属元素异常的未来演变趋势进行了预警预测。     

Trace metals in suspended particulate matter and in sediment trap material from a permanently anoxic fjord — Framvaren, South Norway

Geochemical studies of the trace metal concentrations in suspended particulate matter (SPM) and sediment trap material from a permanently anoxic fjord, Framvaren, South Norway in 1989 and 1993 indicate that extremely high concentrations of zinc (max = 183920 mg/kg), copper (max = 4130 mg/kg), lead (max = 2752 mg/kg), and cadmium (max= 8.1 mg/kg) sometimes (1993) occur in the SPM collected in the anoxic water layer. The highest concentrations of Zn occur just below the redoxcline at 22 m water depth (in 1993), and copper, lead and cadmium have maximum concentrations between 30 and 80 m depth, where the amount of total SPM is at a minimum (about 0.3 mg/L). On a mass per volume (g/L) basis, the maximum concentrations of Cd, Cu and Fe occur at the interface (21m) and those of Zn occur just below the redoxcline (22 m depth). The SPM and sediment trap data suggest that the metals are precipitated as sulfide minerals in the anoxic water. The presence of particulate sulfides was confirmed by SEM studies that show the occurrence of discrete metal (Cu, Fe, Pb, and Zn) sulfide particles in size from 10–20 m as well as framboidal pyrites (1–5 m in size). Higher levels of metal sulfides at intermediate depths rather than in the deep water of Framvaren (> 100 m), may be due to input of trace metals by water exchange over the sill in the upper part of the water column. In the deep water, less metal sulfide precipitation takes place due to depletion of trace metals, and the dilution of particulate metal concentrations by organic matter and by the chemogenic formation of calcite.     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

PDC钻头切削齿破岩载荷规律的分析

对PDC钻头冠部形状及不同的布齿密度和切削齿在不同的磨损状态下对PDC钻头切削齿受力的影响进行了分析；用相邻的3个切削齿之间的关系(不同的切削齿与切削齿之间的径向距离和切削齿之间的高度差)来分析PDC钻头冠部形状和切削齿布齿密度对切削齿受力的影响，以及将切削齿的磨损状态简化成与切削齿在钻头上装配方向垂直的平面来分析切削齿磨损状态对切削齿受力的影响。     

自重湿陷性黄土地区桩基设计探讨

根据自重湿陷性黄土的特点、《湿陷性黄土地区建筑规范》（GB50025—2004）和《建筑桩基技术规范》（JGJ94—94）中关于桩基设计的对比分析，通过自重湿陷性黄土场地工程实例分析计算，依据负摩擦产生的机理——中性点理论，论述了自重湿陷性黄土场地中桩基设计应考虑中性点，而不应全部计入负摩阻的观点。     

数据备份服务器备份性能分析

针对数据备份服务器备份性能优化问题，分别对实时数据存储与历史数据备份之间的关系、数据备份服务器所备份的数据类型非唯一性、客户数量对备份服务器备份效率的影响三方面进行初步的测试与分析，提出了通过优化数据块的选取、优化数据采集方式、优化备份策略提高备份服务器备份效率的基本方法。     

Towards a direct collapse–load method of design for concrete frames subjected to severe ground motions

Most current methods of design for concrete structures under earthquake loads rely on highly idealized ‘equivalent’ static representations of the seismic loads and linear‐elastic methods of structural analysis. With the continuing development of non‐linear methods of dynamic analysis for the overload behaviour and collapse of complete concrete structures, a more direct and more accurate design procedure becomes possible which considers conditions at system collapse. This paper describes an evaluation procedure that uses non‐linear dynamic collapse–load analysis together with global safety coefficients. A back‐calibration procedure for evaluating the global safety coefficients is also described. The aim of this paper is to open up discussion of alternative methods of design with improved accuracy which are necessary to move towards a direct collapse–load method of design. Copyright © 2002 John Wiley & Sons, Ltd.     

应用遥感技术分析廉州湾悬沙的动态特征

该文依据美国陆地卫星 (Landsat)接收的MSS、TM资料 ,得到廉州湾海区表层悬沙分布的解译图 ,分析廉州湾及湾外海区水流流场特征、悬沙的分布及输移扩散特征 ,并就潮流、径流等水动力对湾内悬沙运动、滩槽冲淤的作用和影响进行了讨论