基于空间变异修正普通克里金的矿区复杂地形高精度建模

普通克里金法是构建矿区三维地形模型并揭示地表沉陷形变场动态变化规律的有效方法。但普通克里金法存在平滑效应的问题,导致估计值的空间变异程度小于实际,无法真实反映矿区复杂地表形态的空间变化特征。本文结合矿区实际地形采样数据,提出了一种空间变异修正的普通克里金法,并将其应用于矿区复杂地形的高精度建模,并与已有方法在建模精度和空间变异性复现方面进行了对比分析。研究结果表明,空间变异修正的普通克里金法能够很好地处理平滑效应对建模的影响,具有更高的建模精度和空间变异性复现能力,在矿区复杂地形高精度建模应用中具有较强的适用性,可以作为一种可靠的建模工具用于矿区复杂地形沉陷形变场动态变化规律分析。     

基于ICESat-2 ATLAS数据的DEM高程精度评价

为探究ASTER GDEMV3、SRTM1 DEM和AW3D30 DEM 3种开源DEM数据的高程精度,本文以高精度ICESat-2 ATLAS测高数据为参考数据,利用GIS统计分析、误差相关分析及数理统计对DEM的高程精度进行对比评价。结果表明：①AW3D30的质量最稳定;SRTM1 DEM在平原精度最高;在高原山地精度由高到低依次为AW3D30 DEM、ASTER GDEMV3、SRTM1 DEM。②DEM数据高程精度受地表覆盖影响较大,且与地形因素密切相关,在相同地表覆盖的两个研究区中DEM数据高程精度表现情况不一致,SRTM在平原地表覆盖下精度表现最好,平均误差为3.15 m,AW3D30 DEM在山地地表覆盖下精度表现最好,平均误差为7.61 m。③坡度对DEM数据的高程精度影响较大,在两个研究区3种DEM数据的高程误差均随坡度的增加而增加;坡向对DEM数据的高程精度影响较小,未发现明显的规律。     

岩溶峰丛洼地勘察方法研究

以桂林市郊区某变电站工程为例,在地面调查、钻探及高密度电法测试的基础上,分析了峰丛洼地的岩溶发育特征。强调了地面调查在岩溶勘察中的重要性。     

新疆哈拉奇地区地面高精度磁测异常及解释简

新疆哈拉奇地区位于西南天山与塔里木盆地接触部位,属于航空磁法测量的边缘区,未开展过地面物探工作。此次开展地面高精度磁测工作,划分了6个区域磁异常区,圈定了3处次级高磁异常和1处局部高磁异常。推断区域磁异常由隐伏基性侵入岩、基底引起,次级高磁异常由构造引起,局部异常由矿体引起。磁异常解释为地质研究、寻找磁性矿产提供了参考依据。     

陕北煤矿区地质环境保护与恢复治理措施——以神府矿区郭家湾煤矿为例

郭家湾煤矿地处神府矿区新民采区西北部,为生态环境脆弱区。井田七层煤三个煤组开采后引发地面塌陷、含水层疏干、土地结构变化等地质环境问题,严重制约了地方经济的发展。为了煤炭资源可持续发展,研究陕北煤矿区地质环境保护与恢复治理措施,以1∶10000野外详细调查为依据,首先进行现状评估,然后针对矿山工程建设可能遭受、加剧、引发的矿山地质环境问题进行预测评估,最后提出了以移民搬迁、回填裂缝、生态恢复、建立矿山地质环境监测体系等为主的防治措施,让煤矿开采与矿山地质环境问题恢复治理并行。旨为陕北地区乃至全国煤矿,在保护地质环境中开发利用矿产资源提供依据和示范。     

Pseudo-dynamic methods for seismic passive earth pressure behind a cantilever retaining wall with inclined backfill

The designing of retaining walls requires the complete knowledge of earth pressure distribution. Under earthquake conditions the design needs special attention to reduce the devastating effect, but under seismic conditions, the available literature mostly uses the pseudo-static analytical solution as an approximate to the real dynamic nature of the complex problem. This paper shows a detailed study on the seismic passive earth thrust behind a cantilever retaining wall with inclined backfill surface by pseudo-dynamic analysis. A planar failure surface has been considered. The effect of variation of parameters such as soil friction angle, wall friction angle and back fill inclination have been explored. A complete analysis shows that the time dependent non-linear behaviour of the pressure distribution obtained in the present method results in more realistic design values of earth pressures under earthquake conditions. Results are provided in tabular and graphical non-dimensional form and compared thoroughly with the existing values in the literature.     

Inference of surface concentrations of nitrogen dioxide (NO2) in Colombia from tropospheric columns of the ozone measurement instrument (OMI)

For the first time, maps of surface concentration of nitrogen dioxide (NO₂) are presented for the Colombian territory. NO₂ surface concentrations for the year 2007 are inferred based on two sources of tropospheric NO₂ column data: (1) a simulation using a three-dimensional global model (GEOS-Chem) and (2) measurements made by the ozone monitoring instrument (OMI) onboard the NASA Aura satellite. Results show monthly averages between 0.1 and 6 ppbv. We compare these inferred values to corrected ground measurements of NO₂. We find correlation coefficients of up to 0.91 between the inferred data and the corrected observational data. A significant source of NO₂ is biomass burning, which can be diagnosed by data of fire radiative power (FRP) from the Monitoring of Atmospheric Composition and Climate (MACC) reanalysis. We find a close relationship between high values of inferred NO₂ surface concentrations and biomass burning for a large area which encompasses the departments of Caquetá, Meta, Guaviare, Vichada, and Putumayo.     

应用响应曲面法优化凯氏定氮法的消解条件

经典凯氏定氮法是通过观察消解反应现象来控制温度和时间,对于数量较多的样品同时消解会耗费大量的人力及时间,因此需要采用合理的试验设计方法确定最佳消解温度和时间,以实现批量消解样品,提高分析效率。本文利用响应曲面法对凯氏定氮法中的消解条件进行了优化分析,选择料液比、消解温度和消解时间作为优化因素,研究三因素的不同水平对氮含量测定的影响。通过响应曲面分析得到最优的消解条件为:料液比(g/mL)=0.3∶5,消解温度260℃,消解时间60 min。重复实验结果表明,样品在优化的条件下能够很好地消解,重现性较好;标准物质的氮含量的实验测定值(1310×10-6)与标准值(1300×10-6)基本一致,两者的对数误差绝对值为0.003,方法的准确性高。应用响应曲面试验设计方法,对于评价凯氏定氮法中三个消解条件对氮含量的非线性影响起到了很好的优选作用,能更好地预测实验因素对分析结果的影响趋势,可以准确控制消解温度和消解时间,对于提高分析效率具有实用意义。     

Computational study on the modification of a bounding surface plasticity model for sands

The accurate simulation of complex dynamic phenomena requires the availability of advanced constitutive models capable of simulating a wide range of features of soil behaviour under cyclic loading. One possible strategy is to improve the capabilities of existing bounding surface plasticity models, as this framework is characterised by its modularity and flexibility. As a result, specific components of the formulation of this type of model may be adjusted to improve the reproduction of any aspect of soil behaviour deemed essential to the problem being analysed. In this paper, a series of computational studies are performed in order to establish the impact of expanding a bounding surface plasticity model for sands on its modelling capabilities and to suggest ways of mitigating the associated increase in complexity. Changes to three distinct aspects of the selected constitutive model are examined: the shape of the Critical State Line in p′ − e space, the expression used for calculating the hardening modulus and the form of the yield surface. It is shown that the introduced changes have the potential to increase significantly the ability to control how certain aspects of soil response, such as degradation of stiffness and flow liquefaction with limited deformation, are reproduced by the model. Moreover, this paper presents a systematic approach to the expansion of this type of constitutive model, establishing how alterations to the formulation of a model may be assessed in terms of improved accuracy and potential benefits.     

CORS系统在GPSC级控制网测量中的应用

简要介绍了CORS系统的发展情况,分析了GPS C级控制网测量的精度,就GPS网的布设、基线解算、GPS网平差及检核进行有益的探讨,旨在发挥CORS的优势,解决GPS控制网测量中控制点缺乏的问题,提高CORS的应用水平。