三道溜河地区太古宙岩浆－构造事件

三道溜河地区处于中朝准地台北东缘，北西起自著名的夹皮沟金矿，南东至四道砬子河，太古宇出露广泛。笔者在此进行１：５万区调时，共发现了六次岩浆－构造事件，由老至新依次为：７８７角闪辉石岩、岭东片麻岩、大朝阳沟斜长角闪岩、三道溜河ＴＴＧ岩组、唐胡店沟二长花岗岩、五道砬子河变辉长辉绿岩（发生在元古宙早期，在时空上与太古宇关系密切）。上述事件，表现为基性岩类与酸性岩类交替出现。基性岩事件依次为超基性岩－基性岩－偏碱性基性岩，稀土元素总量由高至低，微量元素Ｂａ、Ｍｎ、Ｚｒ递增，Ｐｂ、Ｚｎ递减。酸性岩事件依次为中酸性岩－酸性岩－偏碱性酸性岩，稀土元素的Ｌａ／Ｌｕ、ΣＣｅ／ΣＹ由低到高，总量变化不大，微量元素Ｃｏ、Ｃｒ、Ｎｉ、Ｃｕ递减。本区的构造运动与岩浆侵入活动相辅相成，古穹窿构造及北西向韧性剪切带控制了Ａｕ、Ａｇ、Ｃｕ等矿产的展布。     

Flow and grainsize pattern in a sharply curved river bend

The main characteristics of river flow and grainsize in a bend of the sand bedded meandering river Dommel, The Netherlands, are presented. Measurements were carried out at a relatively low discharge in a sharply curved bend following a long straight reach. In the studied bend, secondary circulation is restricted to the thalweg area; only in the downstream part of the bend it exists over the entire cross-section. Therefore, on the entire pointbar platform, which comprises the larger part of the bend, the median sedimentation diameter of the bedload material is governed by the distribution of the longitudinal components of the bed shear stress only.     

吉林省西林河金矿构造特征及找矿方向

对矿区划分了太古宙、元古宙、中生代和新生代四个构造层；整个矿区为一棋盘格子形构造体系；主干构造形迹为由东、中、西三个韧性挤压剪切带，金矿的主要成矿构造是西部韧性挤压、剪切带，主要找矿方向为西带Ｆ６及其派生的近南北向剪切断裂群。     

华北地区的共轭地震构造带

本文采用小地震活动图象和４．０级（Ｍｓ）以上地震震源机制资料的构造分析方法，得到一幅华北地区震源构造在地面的投影分布图，它显示４条ＮＮＥ－ＮＥ向和１条ＮＷＷ－ＮＷ向地震构造带交切成的共轭剪切构造格架。每条地震构造带又由一系列共轭剪切构造组成。由发生在带内的５个大震序列共轭破裂特征发现，共轭地震构造的孕震与控震作用是地震构造带形成的机制。     

Time effects on dynamic soil properties under random excitation conditions

Two types of clayey soils, a kaolinite and a bentonite, were tested using a resonant column apparatus under random excitation conditions. The concept of root mean square (rms) strain was utilized for the purpose of strain calculations during random loading. The conventional estimator of the transfer function was used for random vibration analysis. The effect of confinement duration (at a constant pressure) on dynamic soil properties, namely damping and shear modulus, was evaluated. The results indicate that for both cohesive soils, the effect of time was less pronounced during random vibration than sinusoidal loading at the same rms strain. This effect is however more pronounced when the peak shearing strain of sinusoidal loading is considered. Furthermore, time effects were more pronounced at low strain levels than at high strain levels.     

Characteristics of horizontal crustal deformation in Japan as deduced from frequency distribution of maximum shear strain rate

In order to study characteristics of horizontal crustal strains, we divide the Japanese Islands into 14 tectonic provinces consistent with the suggestion given byMatsuda (1990). We calculate frequency distribution of strain rates using the results of the Precise Control Survey initiated by the Geographical Survey Institute in 1973. This survey is a revision of old first- and second-order triangulation networks by trilateration. The principal axes and principal strains inside all the geodetic triangles are deduced from the comparison of the old triangulation and the new trilateration networks. The maximum shear strain rates are calculated by dividing the accumulated strains with the time intervals. The frequency distribution of strain rates is counted for each tectonic province and for the entire Japanese Islands. It is proved that the maximum shear strain rate with highest frequency ranges from 0.10–0.15 microstrain/a for 4409 data in the Japanese Islands. The mean value of the strain rates throughout the Japanese Islands is deduced to be 0.18 microstrain/a. We also calculated a mean value of strain rates for each tectonic province. Comparison is made between mean geodetic strain rates in the provinces and Quaternary strain rates estimated by geomorphic data. It is found that 0.3–0.4 microstrain/a of the highest order strain rate is now prevailing in the Izu province, the south Fossa-Magna collision zone, and some special provinces along the eastern part of the Japan Sea coast.     

华北地区韧性剪切带几种岩石的波速各向异性高温高压实验研究

对华北地区韧性剪切带几种代表上、中、下地壳深度的糜棱岩及其围岩在高温高压条件下进行纵波速度测定及各向异性研究．对实验样品的纵波速度测定得到以下结果：１．沿糜棱岩面理方向的纵波速度大于与面理垂直方向的纵波速度，差值为０．１５-０．３０ｋｍ／ｓ，各向异性为３％-５％；２．糜棱岩的纵波速度低于其围岩的纵波速度，差值为０．１０-０．４５ｋｍ／ｓ；３．中地壳角闪岩相糜棱岩的纵波速度各向异性高于上地壳绿片岩相糜棱岩和下地壳麻粒岩相糜棱岩的各向异性；４．地震波速各向异性与糜棱岩矿物优选定向有关．     

BED SHEAR IN EVOLVING SCOUR AT A CYLINDER:A THEORETICAL APPROACH

ＢＥＤＳＨＥＡＲＩＮＥＶＯＬＶＩＮＧＳＣＯＵＲＡＴＡＣＹＬＩＮＤＥＲ：ＡＴＨＥＯＲＥＴＩＣＡＬＡＰＰＲＯＡＣＨＳｕｂｈａｓｉｓｈＤＥＹ１ａｎｄＳｒｉｊｉｂＫ．ＫＡＲ２Ａｂｓｔｒａｃｔ：Ｔｈｅｔｅｍｐｏｒａｌｖａｒｉａｔｉｏｎｏｆｓｈｅａｒｓｔｒｅｓｓ...     

方解石多晶集合体的高速率简单剪切变形实验研究

本文介绍了方解石多晶集合体在高应变率(373S^-1到1507S^-1)下简单剪切变形实验,结果表明,破裂形式和应变率有关,随着应变率的增加,从晶间微破裂为主变为晶内微破裂和粉碎为主。     

内蒙古东五分子地区韧性剪切变质作用的特征

东五分子地区花岗-绿岩地体经受了三种类型变质作用的改造。韧性剪切带不仅控制了区域变质岩组合的分布,而且也导致其变质作用的强度出现了逆转序列。根据岩石的结构、碎斑含量及矿物成分,韧性剪切变质岩划分为三类,其共同特点是具有碎斑结构。其变形结构分为单矿物型及组合型。同一块韧性剪切变质岩由处在单变平衡的一组矿物组成。根据岩石变形及重结晶的特点,结合其产状,确定出两种不同类型韧性剪切变质带。共生矿物对的研究证明它们形成于地壳不同深度及温度、压力条件。本区的金矿化、运移、沉淀与韧性剪切变质带紧密相关。