Hydrological connectivity of soil pipes determined by ground‐penetrating radar tracer detection

Soil pipes are common and important features of many catchments, particularly in semi‐arid and humid areas, and can contribute a large proportion of runoff to river systems. They may also signi?cantly in?uence catchment sediment and solute yield. However, there are often problems in ?nding and de?ning soil pipe networks which are located deep below the surface. Ground‐penetrating radar (GPR) has been used for non‐destructive identi?cation and mapping of soil pipes in blanket peat catchments. While GPR can identify subsurface cavities, it cannot alone determine hydrological connectivity between one cavity and another. This paper presents results from an experiment to test the ability of GPR to establish hydrological connectivity between pipes through use of a tracer solution. Sodium chloride was injected into pipe cavities previously detected by the radar. The GPR was placed downslope of the injection points and positioned on the ground directly above detected soil pipes. The resultant radargrams showed signi?cant changes in re?ectance from some cavities and no change from others. Pipe waters were sampled in order to check the radar results. Changes in electrical conductivity of the pipe water could be detected by the GPR, without data post‐processing, when background levels were increased by more than approximately twofold. It was thus possible to rapidly determine hydrological connectivity of soil pipes within dense pipe networks across hillslopes without ground disturbance. It was also possible to remotely measure travel times through pipe systems; the passing of the salt wave below the GPR produced an easily detectable signal on the radargram which required no post‐processing. The technique should allow remote sensing of water sources and sinks for soil pipes below the surface. The improved understanding of ?owpath connectivity will be important for understanding water delivery, solutional and particulate denudation, and hydrological and geomorphological model development. Copyright © 2004 John Wiley & Sons, Ltd.     

A hybrid method for size characterization of coarse subsurface fluvial sediments

This paper introduces and evaluates a novel method for ascertaining the grain‐size distribution of subsurface sediments that involves profoundly less sampling effort than standard methods. It is based on hybrid sampling principles previously applied to the construction of synthetic surface grain‐size distributions. The method is developed from an empirical demonstration of the approximate similarity of surface and subsurface grain‐size distributions when compared over a common range of sizes. Subsurface hybrid models are found to provide good facsimiles of grain‐size distributions de?ned using standard criteria and to yield distribution percentiles with millimetre accuracy. The technique is presented as an expedient alternative to standard methods for large, perennial gravel‐bed rivers. As this is a new technique, prudent application is advised in lieu of further investigation. Copyright © 2004 John Wiley & Sons, Ltd.     

Investigation of upper crust anisotropy in Ghaen-Birjand region, east-central Iran

IntroductionWhenpropagatingthroughananisotropicmedium,ashearwavesplitsintotwo(quasi)shearwaveswithdifferentpropagationspeedsandpolarizedorthogonally.Owingtotherecentdevel-opmentofseismicobservationsystem,detectionofshearwavessplittingwithverysmalldelaytimesbetweenfasterandslowershearwavesbecameavailableandprovidedpowerfulapproachfordetectionofcrustalanisotropy.Crampin(1978)emphasizedtheroleofalignedmicrocracksasacauseofcrustalanisotropyandpointedoutthatforverticallyalignedmicrocracksthedirecti…     

Period formulas of shear wall buildings with flexible bases

The evaluation of the fundamental period of shear wall buildings considering the flexibility of the base is investigated in this paper. This research is motivated by the discrepancy reported between the formulas used in different building codes and the measurement of real buildings. Both experimental and analytical approaches are used to assess the effect of the base flexibility on the fundamental period of shear wall structures. In total, twenty buildings built on different types of soil are tested under ambient vibration. The fundamental period is identified using a non‐parametric linear model in the frequency domain. The results show that fundamental period formulas used by UBC‐97 and NBCC‐95 are inadequate since they do not include the effect of the foundation stiffness. To improve the estimation of the fundamental period of shear wall buildings, an analytical approach is presented. The structure and the foundation are represented by a continuous‐discrete system. The stiffnesses of the base are represented by translational and rotational discrete springs. The rigidities of these springs are evaluated from the elastic uniform compression of the soil mass and the size of the foundation. The analytical predictions improve the estimation of the fundamental period and keep the computation simple. The error between the measured period and the analytical results is, on average, less than 10%. Copyright © 2003 John Wiley & Sons, Ltd.     

The seismic shear of ductile cantilever wall systems in multistorey structures

The distribution of seismic base shear demand among ductile flexural cantilever walls, comprising the lateral load resisting system of a multistorey building, is studied. It is shown that the base shear force demand depends on the sequence of hinge formation at the wall bases, and this in turn depends on the relative wall lengths. Hence, the routine elastic approach in which the shear forces are allocated per relative flexural rigidity or (when some consideration is given to plastic hinge formation) to moment capacity at the wall base, may appreciably underestimate the shear force demand on the walls, particularly the shorter (usually the more flexible) ones. A simple procedure yielding the results of ‘cyclic’ pushover analysis is proposed to predict the peak seismic wall forces for a given total base shear when plastification is confined to the wall base. The effects of plastic hinges developing at higher floors on (1) shear distribution among the walls and (2) the in‐plane floor forces are also considered. Two numerical examples are presented to demonstrate the main points made. Copyright © 2004 John Wiley & Sons, Ltd.     

~(40)Ar/~(39)Ar dating of shear deformation of the Xianshuihe fault zone in west Sichuan and its tectonic significance

TheNW-SEstrikingXianshuihefaultzoneslicesthesoutheasternTibetanPlateauandconnectssoutheastwardwiththeAnninghe-Zemuhe-Xiaojiangfaultzone,whichformahuge,activesinistralstrike-slipfaultzone(fig.1).ThisfaultzoneisanimportantseismicfaultineastTibet[1-5].EarthquakegeologystudiesandoffsetpatternsofyounggeologicalfeatureshaveshownthatlateQuaternarysinistralsliprateoftheXianshuihefaultzonereaches13mm/a[1,2].TheXianshuhefaultzoneconsistsoftwomainbranches,theDaofufaultbranchinthewestandtheXianshuih…     

晴空日中尺度切变环境场与对流云团发展条件

重点应用雷达回波资料结合常规气象资料、卫星云图 ,综合分析了 50 0hPa中尺度切变与陕北南部地区对流阵性降水形成、发展条件 ,指出了 50 0hPa不同的中尺度切变与有利的环境合理配置 ,是导致对流云团发展的重要因素 ,不同特征环境风切变配置与对流单体的发展趋势、强度变化、移动和合并息息相关。     

陕西略阳铧厂沟金矿床地质与矿床类型

铧厂沟金矿床位于勉略缝合带中泥盆系三河口群郭镇岩组中。含矿与容矿岩系为泥盆系三河口群郭镇岩组中的细碧岩和结晶灰岩。主控矿构造为寨子湾韧-脆性剪切构造带。围岩蚀变包括退化蚀变和矿化蚀变。在矿区内产出南北两条矿化带，矿石类型为蚀变细碧岩型、黄铁绢英片岩型和石英脉型。主要的金属矿物为黄铁矿和黄铜矿，金矿物是自然金。韧脆性剪切构造叠加和岩石强烈变形、彻底退化蚀变以及后期含矿热液交代与充填是主要的成矿作用，属于火山-沉积岩系中的类卡林型金矿床。     

南秦岭夏家店卡林型金矿床构造特征与成矿关系

从地质背景、矿床地质、控矿构造分析了夏家店金矿床特征及其形成过程及成矿机理；矿床产于南秦岭陡岭古隆起边缘寒武系-震旦系碳-泥-硅质板岩及白云岩中；控矿构造具有二次韧性剪切变形、二次构造角砾岩化及二次脉体矿化的特征，显示出式样多种、性质多样、形式多变、活动期次与阶段多次叠加的特点；具体阐述了各构造作用阶段与矿化蚀变之间的关系，建立了地层建造-剪切与张裂构造-热液渗流的成矿系统。属于沉积岩系、构造、热液活动3种地质作用叠加改造的卡林型金矿床。     

辽西医巫闾山地区中生代两期韧性变形的研究

医巫闾山地区的韧性剪切构造是中生代两期韧性变形作用的产物。早期韧性变形中a线理发育,线理走向和糜棱面理走向基本一致,线理在xy面上的侧伏角绝大多数<30°;该期韧性变形是以左行走滑运动为主。晚期韧性变形中a线理发育,线理倾伏向和糜棱岩中糜棱面理倾向相近,线理在xy面上侧伏角主要在45°～90°之间;该期韧性变形是伸展作用的产物。医巫闾山中生代两期韧性剪切变形作用表明,在侏罗纪至早白垩世期间辽西地区不仅发生了强烈挤压推覆作用和伸展作用,也发生了大规模左行走滑作用。该韧性变形作用的发现对进一步研究辽西中生代的构造演化序列、期次和构造格架转换等问题有重要意义。