基于流体替换技术的地震AVO属性气藏识别(英文)

传统上,油藏地球物理工程师是基于测井数据进行流体替换,计算油藏饱和不同流体时的弹性参数,并通过地震正演模拟分析油藏饱和不同流体时的地震响应,从而进行油气藏识别研究。该研究方案为油藏研究提供了重要的弹性参数和地震响应信息,但这些信息仅限于井眼位置。对于实际油藏条件,地下储层参数都是随位置变化而变化的,如孔隙度、泥质含量和油藏厚度等,因此基于传统流体替换方案得到的流体变化地震响应信息对于油气藏识别具有很大的局限性。研究通过设定联系油藏弹性参数与孔隙度、矿物组分等参数的岩石物理模型,并基于三层地质模型,进行地震正演模拟与AVO属性计算。得到油藏孔隙度、泥质含量和储层厚度变化时地震AVO属性,并建立了饱和水储层和含气储层对应AVO属性(包括梯度与截距)之间的定量关系。建立的AVO属性之间的线性关系可以实现基于地震AVO属性直接进行流体替换。最后,应用建立的流体替换前后AVO属性之间线性方程,对模拟地震数据直接进行流体替换,并通过流体替换前后AVO属性交汇图分析实现了气藏识别。     

维苏威和武尔卡诺火山碎屑物中磷灰石挥发组分的研究

磷灰石中挥发分的类质同象替换可以反映其结晶时岩浆体系的成分特点。采用扫描电镜、能谱、电子探针、X射线单晶晶胞参数测定和红外、拉曼光谱,对维苏威和武尔卡诺火山碎屑物中磷灰石进行了初步研究,发现其Ca、P位置上不出现替换,主要替换形成于通道位置上。武尔卡诺磷灰石低硫富Cl,晶胞参数c/a值很小,在低压高温下形成;而维苏威磷灰石含硫稍多,通道离子主要由OH-F组成,形成于压力较大、温度较低的环境,Cl趋向于在早期喷发物中富集,而F则趋向于在晚期喷发物中富集。     

饱和致密砂岩中动态剪切模量硬化的实验研究与理论模拟

Gassmann理论认为岩石的剪切模量在饱和流体前后保持不变,这一认识被广泛应用于高孔高渗常规储层中.然而,致密砂岩等非常规储层通常具有低孔、低渗以及孔隙结构复杂等岩石物理特征,因此Gassmann流体替换理论在此类储层的适用性尚不明确.针对这一问题,本文在1~60 MPa有效压力内分别测量了干燥与饱水致密砂岩样品的超声纵、横波速度,并对饱水前后砂岩的剪切模量变化特征进行了分析.结果表明,致密砂岩的剪切模量在饱水前后可能出现弱化或硬化现象.通过对致密砂岩样品的孔隙纵横比进行定量化分析,发现对于微裂缝主要分布在颗粒间以及颗粒内,并且软孔隙纵横比分布范围宽、软孔隙含量较高的样品更容易表现出剪切硬化的特征.利用一般形式的喷射流模型可以较好的模拟剪切硬化现象,但要考虑微裂缝的闭合情况对输入参数的影响.剪切硬化主要来源于高频弹性波激励下流体的喷射流频散作用.考虑到特定条件下在地震和测井频带也会产生频散现象,因此致密砂岩等非常规储层在进行流体替换时需考虑剪切模量可能会发生变化,盲目使用Gassmann流体替换理论的剪切模量不变假设可能会引起较大的预测误差.

     

An interface-condition substitution strategy for theoretical study of dissolution-timescale reactive infiltration instability in fluid-saturated porous rocks

A theoretical study of reactive infiltration instability is conducted on the dissolution timescale. In the present theoretical study, the transient behavior of a dissolution-timescale reactive infiltration system needs to be considered, so that the upstream region of the chemical dissolution front should be finite. In addition, the chemical dissolution front of finite thickness should be considered on the dissolution timescale. Owing to these different considerations, it is very difficult, even in some special cases, to derive the first-order perturbation solutions of the reactive infiltration system on the dissolution timescale. To overcome this difficulty, an interface-condition substitution strategy is proposed in this paper. The basic idea behind the proposed strategy is that although the first-order perturbation equations in the downstream region cannot be directly solved in a purely mathematical manner, they should hold at the planar reference front, which is the interface between the upstream region and the downstream region. This can lead to two new equations at the interface. The main advantage of using the proposed interface-condition substitution strategy is that through using the original interface conditions as a bridge, the perturbation solutions for the dimensionless acid concentration, dimensionless Darcy velocity, and their derivatives involved in the two new equations at the interface can be evaluated just by using the obtained analytical solutions in the upstream region. The proposed strategy has been successfully used to derive the dimensionless growth rate, which is the key issue associated with the theoretical study of dissolution-timescale reactive infiltration instability in fluid-saturated porous rocks.     

城市空间形态的最低成本-周期扩张规律——以昆明为例

城市形态演化反演城市土地利用模式的转变,是内部最低成本土地利用模式驱动力的外部表达。这一城市空间格局演变遵循本文提出的"外部扩张,内部填充"相互交替总体规律。它既是集聚与扩散驱动因子作用的结果,也是植入与再植入的"扬弃"选择过程的交互作用产物。基于最低成本—周期扩张模型的假设,本文选取昆明建成区近现代的影像资料,运用形态学的视角分析城市空间结构的变迁,探寻城市形态演化规律。结果表明:(1)从城市形态演变的一般理性微观、宏观过程来看,城市形态变迁在统计学上遵循最低成本—周期扩张规律假设;(2)在最低成本—周期扩张模型内,公共投资与基层设施建设变动及其要素替代效应对形态的周期性扰动响应是其核心作用机制。     

Fe-Li云母化学成分的解释和分类

用置换矢量概念解释了115个天然 Fe-Li 云母化学成分的变化。Fe-Li 云母是三八面体 Li-Fe-Al 云母,其基本置换是四锂云母置换。由于 Al-Li 白云母置换和白云母置换的影响,其化学组成变化的基本趋势呈明显的非线性,因而 Fe-Li 云母不是真正的二元系。作为 Fe-Li 云母,富铁黑云母和铁叶云母都是最富铁的成员,因而建议称 Fe-Li 云母为黑云母-锂云母系列。根据化学成分,晶胞参数和折光率的异常变化还提出了该系列自然分类的方案。     

贵阳新一代天气雷达(CINRAD/CD)交流伺服系统的故障分析与处理

CINRAD/CD伺服系统在升级改造后,大部分都由直流伺服改为交流伺服,该文从介绍新一代天气雷达(CINRAD/CD)交流伺服系统的工作原理入手,通过维修处理伺服系统的3个故障事例,逐一剖析伺服系统出现故障的原因,并针对伺服系统方位与俯仰结构相同的特点,用组件替代的方法查找故障,节省维修时间,快速处理故障。     

地貌发育演化研究的空代时理论与方法

地貌的发育在特定的条件下往往呈现空间分布上由“新”至“老”的过渡,据此,对地貌类型与特征在空间上的序列采样,即可为研究某种地貌的个体发育提供基本依据。该方法即为地貌学研究中的空代时。本文首先介绍了空代时方法产生的背景与基本概念。分析了近年来空代时方法应用于河流地貌、构造地貌、河口海岸地貌等不同地貌类型演化过程的研究进展。在此基础上,明确了空代时方法在地貌学研究中的适用条件、影响因素及分类体系,并提出了地貌学空代时的研究范式。本文认为今后的研究工作一方面应充分利用海量的地理空间数据,运用空代时方法研究多种空间尺度下的地貌演化的问题;另一方面,应结合现有的物理机制和统计规律,构建集形、数、理一体化的地貌演化模型。     

Effective bulk modulus of the pore fluid at patchy saturation

We explore a package of parallel porous layers, each filled with a different fluid. Assume that this package is sampled by an elastic wave with the wavelength much larger than the thickness of an individual layer. Also assume that the layers are hydraulically isolated from each other, meaning that the diffusion length is smaller than that of the individual layer. This assumption is relevant to a patchy saturation scenario. Suppose that we wish to conduct the fluid substitution operation on this package treated as a single porous elastic body. What is the effective bulk modulus of the pore fluid to be used in this operation that will result in the same elastic modulus as computed by Backus averaging the individual moduli of the layers? We address this question analytically by assuming that the porosity, dry frame, and the mineral matrix properties of the individual layers are the same for all layers. The only difference between the layers is the pore fluid. We find that the resulting effective bulk modulus of the fluid thus derived falls between the arithmetic and harmonic averages of the fluid bulk moduli in the layers. It can be approximated by a linear combination of these two bounds where the weights are 0.50 and 0.50 or 0.75 for the arithmetic average and 0.25 for the harmonic average, depending on the elastic moduli of the dry frame, the mineral, and the pore fluids. This solution also provides a relation between the effective bulk modulus of the pore fluid in the system under examination and water saturation to be used in the fluid substitution operation at a coarse spatial scale.